I would suggest mixing the two stains together in about even proportions and
test on a scrap piece of wood and adjusting the quantities until you are happy with the overall tone.)
I experiment with
stains on scrap pieces of wood (make sure it is the same kind of wood used in your project) until I came up with a combination that I liked.
(Tip: drill out
each on a scrap piece of wood to 1/2 «then mark the stopping point on each bit with drill stop - collar or you can mark with painters tape around the bit).
I would do a test run with
it on a scrap piece of wood first — just to get the hang of applying and buffing it.
Before you start painting, I would recommend doing a small application test either
on a scrap piece of wood or somewhere unnoticeable on the piece of furniture, either on the back or the underside of a drawer like I did.