Blackfin and skipjack tuna are also found in the Cayman Waters and can be fun to catch
on spinning gear or daisy chains where you can catch up to two, three and even four at a time.
Not exact matches
Home delivery of freshly prepared meals, meal kits and provisions took off in 2015, with dozens of new ventures kicking into
gear, each with its own
spin on convenient, healthful food.
Making an order sounds simple enough: Pour one ladle of liquid vegetable shortening (literally the grease that keeps the
gears at the Waffle House
spinning)
on the grill and top with a scoop of potatoes.
However, the Polish international quickly goes through the
gears,
spinning on the ball and driving at the Inter team and, coupled with the movement from the attacker of the ball, is able to thread through pass which takes all seven Inter players out of the game.
And because smaller wheels
spin faster, they required less of a
gear reduction to match their rotation to that of the motor, saving
on gear weight and friction.
The Lean Power processor monitors the rotation of the flywheel, which in car engines
spins at anything between 600 and 6000 revolutions per minute depending
on the
gear and speed.
As 20th Century Fox's X-Men
spin - off Deadpool
gears up to go into production, T.J. Miller (Transformers: Age of Extinction) has revealed
on Twitter that his «comedic» role in the Ryan Reynolds - headlined movie is that of Jack Hammer, a.k.a. Weasel, who in comic book continuity (and presumably in the film too) is Wade's tech expert and -LSB-...]
Pre-production
on the long in - development X-Men
spin - off is
gearing back up after losing directors Doug Liman (in 2016) and Rupert Wyatt (in 2015) over creative differences and scheduling conflicts.
Channing Tatum is hard at work
gearing up for production
on FOX's upcoming X-Men
spin - off movie Gambit.
Billy and Jimmy must initially jump across platforms
on a ship, and later over
spinning gears and platforms that move up and down.
Pundits of all persuasions are
gearing up to jump
on the news and promote their
spin.
All four wheels
spin up, the car snaps sideways off the line, you apply half a turn of lock, ease the revs whilst keeping the wheels
spinning all the way through first
gear then time the flick of the right - hand paddle just before snagging the limiter at 8000rpm (no automatic upchange) and from then
on it's easy, just watch the rev - counter, keep changing up and bingo you've got your figures!
The engine is
spinning at five grand — a relatively relaxed pace made possible by the long fifth
gear that I swapped in years ago, never dreaming it would pay such tremendous dividends
on an autobahn.
On damp ground, the GT2 will
spin its wheels in first and second
gear, especially between 2200 and 4500 rpm, when maximum torque of 502 lb - ft comes in.
The improved Speedshift MCT seven - speed transmission always finds the proper
gear on its own in the Track setting, but manual mode lays power down more effectively (though overeager, heavy - footed drivers may still find the lure of wheel -
spinning torque too tempting to resist).
With my bike
on a paddok stand and turned
on, I know the rear wheel
spins in neutral but when I put it in
gear and pull the clutch lever in it still continues to
spin.
If the helical
gear spins freely
on the shaft then the roll pin has sheared.
However, instead of allowing the rear wheels to turn at different speeds by using
gears there are two clutch packs, one
on each driveshaft that can fully open and allow each rear wheel to
spin independently.
Doing so helps to tremendously smooth out
gear changes
on many motorcycles, as the new
gear is essentially
spun up to speed before attempting to actually engage it.
Leaving an automatic
on D risks it going up a
gear too quickly, having insufficient power and losing momentum
on encountering the incline leaving you in stuck with wheel
spin.
The synchronizers have a wear material
on them and can be shaped like a cone and once the speeds of the shafts match (through the
gear ratio), then the output shaft is connected to the
gear and everything is
spinning and power can be applied by releasing the clutch pedal.
As a result, the 35i feels no faster off the line, and its six - speed transmission has a much shorter top
gear — meaning the six - cylinder is
spinning much more quickly
on the highway.
When you back off and let the engine
spin on a long leash, the chips take their time before they eventually call upon the fuel - saving top
gear.
While it's up
on its built - in jacks, a second technician fires the car up and works gently up and down the
gears, all four wheels
spinning as the engine and transmission warm through with zero loading.
The over run clutch
on a pre-engaged starter motor is there to prevent the flywheel ring
gear spinning the stater motor at such a high speed that it is destroyed
On wet surfaces, fourth -
gear wheel
spin is easy — that's how loose those 285 / 30 YR -20 rear Dunlops can be.
What that means is that the ZF - 9HP's top
gear is «taller»,
spinning the engine at lower revs
on the highway to reduce fuel consumption.
While the sun
gear spins, the planetary
gears move around it, either around the ring
gear or locked into it depending
on the
gear the transmission is in.
The transmission's program is also modified by Sport mode, holding
on to each
gear nearly all the way to the redline and downshifting to keep the engine at a boil (and the turbo
spinning) when slowing for a corner.
On cold tires, the grip goes away halfway through first
gear and the rear wheels
spin with real enthusiasm.
In the winter mode the car starts moving in second
gear, which helps prevent the wheels from
spinning on ice - covered roads.
And annoyingly, the engine languishes
on the revs,
spinning uselessly away from one
gear to the next.
On wet pavement, it was easy to
spin the front tires in the first two
gears.
Chevrolet claims that thanks to the Malibu's two - mode system (basically two planetary
gear sets switched between via a clutch), they're able to have the car performing well both around town and
on the highway, by metering - out how fast the gas engine
spins.
While the SL550 growls aggressively under acceleration, then sounds off with exhaust pops
on gear changes and deceleration, the SL450 emits a mechanically pure whirr, like a big turbine
spinning up.
Just avoid the standard 3.21
gearing if you can, especially if you plan to put
on bigger tires; you're going to want the extra tire -
spinning torque multiplication (and better crawl ratio) that the available 3.73 or Rubicon - only 4.10
gearing provides.
A long second stop
on lap 48 spoils Gavin's race; his car's air jacks fail to release and the # 4 Corvette's wheels
spin up before grounding and engaging
gear
Spinning your tires
on a project is a horrible feeling, but when that happens sometimes all you need is to shift
gears for a little while to get unstuck.
With the next - gen Xbox rumor mill
spinning wildly, Epic Games, developer of the successful
Gears of War series and creator of the Unreal Engine shared their thoughts
on the next generation of console gaming.
An innovative
spin on platforming, instead of moving right, left, up, and down, you move clockwise and counterclockwise as you roll around other
gears, collecting sparks of energy to buy power - ups and avoiding dangerous machinery!
After a trilogy (and the
spin - off, Judgment)
on Xbox 360, the latest title in the series,
Gears of War 4, moved to modern Xbox One hardware and showed off the power of the new console.
At times, all too infrequently, the
spinning is that of a fine old vintage auto, alternately accelerating and idling, changing
gears and eating up the miles, chewing
on a problem and arriving at the destination.
For three months this past winter I ignored an issue with my front door where pushing the plunger
on the door handle didn't always
spin the internal
gears quite far enough to pull the bolt fully clear of the plate
on the door frame.
I could see the «
gears» in his mind
spinning faster than the RPMs
on a Maserati.