NEVER use older, accordion - style gates with large V - shaped
openings along the top edge and diamond - shaped openings in the sides that are large enough to entrap a child's head and strangle the neck.
Not exact matches
Sew the body of the holder: fold the fabric in half so that it's 6» by 10» (or whatever your measurement was) and sew
along two of the three raw
edges, leaving the
top open.
When you hold it so that the front - facing camera is on the
top,
along the
top edge are a volume rocker, a 3.5 mm headphone jack, a USB 2.0 micro-USB port and a power button, all of which are accessible through two deep
openings in the case.
To secure the final side attach a couple of spring clips
along the
edge to stop it
opening up and slide a piece of wood through at the
top along the
edge for support and attach it to the roof with cable ties.
While the front panel door must be swung
open to access the card reader and optical drive, all of the forward - facing ports (such as USB 3.0) are located on the front
top edge of the case
along with the power and reset buttons, providing a perfect combination of refinement and functionality.
Just press the «read aloud» button at the
top - right corner after
opening one of your e-books and listen to Microsoft
Edge read you the book with focus on the line and the word being read
along.
Apply a thick line of hot glue from the
top of the container,
along the
edge of the
opening, down to the bottom of the container.