I seriously had to sit there for hours with
the orbital sander, going back and forth, to sand that out.
The paint left had some harsh lines so I softened it up a little with a sheet sander followed by an random
orbital sander.
If you only had one sander I would probably stick to the palm sander as it can get into more tight spaces than the round
orbital sander.
I use whatever I have handy... For this one I used
my orbital sander with 120 paper, but I usually use a sanding block with 80 grit paper.
I used an inexpensive
orbital sander to «rough up» the paint finish and edges a bit.
Remove existing finish and rough edges with
orbital sander using medium - grit sanding pads.
Remove existing finish from the desk and rough edges with
orbital sander using medium - grit sanding pads.
Grab
your orbital sander equipped with 120 grit sandpaper and give the top and sides a good sanding until they are nice and smooth.
Once I got it home, the first thing I did with this piece was to sand the laminate top with
my orbital sander, clean it well with TSP substitute and then added a thin coat of Fusion's Ultra Grip.
You can do this lightly with fine grit sandpaper, heavier with gritty sandpaper, or you can take and
orbital sander to it and distress the living daylights out if it... your call.
Once it's dry, take
your orbital sander and sand off any glue that seeped out.
Let it dry, then sand the entire piece with
your orbital sander and 220 grit sandpaper.
After I scraped it off, there were a few stubborn spots including the edges, so I decided to do a quick run over the top with
our orbital sander.
I used my Makita
orbital sander -LCB- love -RCB- with 80 grit paper to rough up the surface and remove some weird wax the table top had on it.
Sand entire piece smooth with 150 and 220 grit sandpaper using
an orbital sander.
I love the way the salt wash came out, but this was my first attempt with
an orbital sander and it kinda got away from me.
In general, whether I want a chippy finish or not, I do hand - sand a piece (although I would love to obtain
an orbital sander someday!)
I sanded mine with
my orbital sander on both sides.
2 Sand Rent
an orbital sander from your local hardware store and give the floors an even sand.
Let dry completely, and sand the entire surface of the table with 220 grit sandpaper using
an orbital sander.
To distress it I used
my orbital sander.
My Dewalt
orbital sander smooths out those scratches in no time.
I sanded with
an orbital sander, but that is optional, I just wanted it to look a little roughed up.
We used
our orbital sander on the flat surfaces of the timbers and the 2x8s.
This is my all - time favorite brand
orbital sander, you can find them: here
Assembled scaffolding if needed; placed corner bead, use stilts, pole sand,
orbital sander, and detailed with sanding sponge.
Caution and patience are certainly hallmarks of her method, but so too are a few drastic techniques, like her use of
an orbital sander to take a region of a panel painting down to the wood base.
I used my Makita
orbital sander -LCB- love -RCB- with 80 grit paper to rough up the surface and remove some weird wax the table top had on it.
a reciprocating saw or perhaps
the orbital sander I have been needing.
Most palm sander reviews will mention the main advantage of a random
orbital sander: they don't leave behind circular marks, but work well for fine detail work as well as smoothing down rough surfaces.
If you've been reading
orbital sander reviews looking for a palm sander with adjustable OPM, you've got a high - quality option right here from Bosch!
It tops off the last of our random
orbital sander reviews, but last doesn't mean least!
Our house is all «a buzzz ``, with drills, saws and random
orbital sanders (Ah!
Not exact matches
It takes a little bit of practice, but a large belt
sander works much better than a random
orbital!
I gave it a good sanding with my
orbital palm
sander equipped with 120 and then 180 grit sand paper.
... I had to abuse her with the
orbital palm
sander.