Step Nine: Starting at one end, allowing 1/2» for the seam allowance, sew along
the outside edge of the fabric.
The outside edge of the fabric then attaches to the upper rim of the tube, forming the body of the puppet.
Not exact matches
Next, lay your
fabric under the presser foot, and zig - zag, allowing the
outside of the stitch to fall slightly off the
edge.
We each made two bibs, the first we both put biased tape around to finish the
edges, but with the second I chose to pink the
edges of our
fabric and then trim to vinyl just
outside the pinked
edges after sewn (don't pink the vinyl or you will end up with a very uncomfortable bib).
The raw
edges of the
fabrics need to be aligned on the
outside.