Sentences with phrase «own autoclave»

Most of its fellows collaborate with universities that generate fresh data from «wet» labs — the ones with autoclaves and genetically engineered mice — and other facilities.

Products packaged on the Magnum HS Med are suitable for use with an autoclave or a sterilizer.

The BT6 316L stainless - steel balanced - pressure steam trap is specifically designed for hygienic applications including steam barriers, CIP / SIP and process vessel drainage, sterilisers and autoclaves, and culinary steam mains drainage.

The carton packs are then automatically conveyed into an autoclave.

The carton packs are then automatically conveyed into an autoclave, which can be either static or rotary.

Not only do the autoclaves, in which package and product are sterilised together, guarantee maximum product quality; through the continuous rotation of the carton packs during heating, they also make it possible to fill and process certain products in the first place — above all, highly viscous foods with extra-large pieces.

In the area of long - life food carton packs, the use of rotary autoclaves is a world first.

Do they put the ink in their own little containers (so they are not re-dipping in a communal ink pot), do they sterilize equipment in an autoclave, do they bag the ink gun and did they wash their hands before they tattooed you?

Just a thought - you would have to boil a bottle for at least ~ 2 hours in order to truly sterilize it, that's why true sterilization with moist heat uses an autoclave to increase pressure in order to decrease the time needed to sterilize.

Don't autoclave the needles you bought off the internet, just wipe them with alcohol.

Test reports done by independent lab show that Maymom flange does not change physically after the autoclave procedure (autoclave report), and it can still pass the FDA 21 CFR, 177.1520 specifications for polypropylene (FDA PP report).

It being taken out of autoclave bag.

Why the special care if this is a fabric that can withstand autoclaving?

Items in an autoclave are carefully loaded, and they don't touch the walls of the autoclave.

In the washer, the sanitize cycle works very differently from an autoclave.

I think they'll melt in the autoclave, too.

Gomez - Marquez holds one of the mirror sections of the so - called Solarclave, a sun - heated portable autoclave that can sterilize surgical implements in village clinics.

I put it in an autoclave bag [normally used for sterilizing equipment], stuffed it in my knapsack, and then I went down the stope further until I came out the bottom into another, deeper tunnel.

In the United States, of course, we are somewhat beholden to higher tech solutions, which in some ways are a little bit more problematic in terms of treating all that waste, and we need autoclaves or incinerators that can handle that sort of thing.

The team produced the tiny nanoparticles using a synthesis technique known as the solvothermal method, in which precursors are heated under pressure in a special vessel, called an autoclave.

Not only was there a dire shortage of basic supplies, like plastic containers for discarded syringes, latex gloves, and autoclaves — a kind of pressure cooker for sterilizing equipment that is the cornerstone of safe microbiological technique — but standard procedures at the hospital also made viral cross infections inevitable.

Photograph is of the autoclave after the reaction, showing the formation of BCN - graphene (black) and potassium halide (KCl and KBr, white).

Bohrman proved that by bringing a sediment core up in an autoclave.

It survived — and multiplied, scientists say — during a 10 - hour blast in a 121 °C autoclave, an oven used to sterilise medical equipment.

In 1907 he heated wood alcohol and coal tar in an autoclave and cooled the amber mixture to create fire - resistant Bakelite.

When all the autoclaves in a lab are in use, he says, researchers substitute modified pressure cookers; some say they work just as well.

In a guidance to the industry, it gave growers and sellers several options: Incinerate, autoclave, bury, compost, or dispose of the plants in a landfill.

The procedure involved weighing of the samples in Teflon ® (DuPont, DE, USA) crucibles, addition of 6 mL concentrated HNO3, and heating in a steel autoclave (Berghof, BTR 941, Eningen, Germany, six - position aluminum block).

The most foolproof device is an autoclave, which sterilizes metal tools overnight.

Dephytinization of wheat bran by fermentation with bakers» yeast, incubation with barley malt flour and autoclaving at different pH levels.

So he left Lamborghini, taking the autoclave he financed and used for the Evoluzione project with him.

For LaFerrari's chassis tub and body panels, Ferrari prefers pre-preg carbon fiber, which is pre-impregnated with resin before it's sent into the same huge autoclaves that bake up all the pieces for the F1 race cars.

«With pre-preg, we are taking a lot less resin for the ride,» quips Cimatti, «because our autoclave techniques allow us to squeeze out excess resin during the baking.»

He designed molds and made the body parts for the Countach Evoluzione and the first competition GT, all without the use of an autoclave.

The adjustable front splitter, front and rear bumper, bonnet, rear diffuser and front wings are all produced in an autoclave, with the doors and roof stamped from aluminium (although US and Canada bound Project 8s will have a Panoramic roof fitted).

Outer Diameter: 280 mm Height: 225 mm Trim: Untrimmed The Reverie Eclipse 280 Carbon Fibre steering wheel is Autoclave cured as a single piece, improving stiffness & reducing inertia.

If you take a look at the Huracan GT3 or the Huracan Super Trofeo race cars you will notice in both cases the rear wing shows a «hanging» design, in Vorsteiner Nero language this is called the «Goose Neck Aero Wing»... a single - piece rigid clear 2x2 carbon fiber autoclave wing element that can be ordered with two different types of «uprights».

Wing Chord: 225 mm Wing Width: 1245 mm Fitment: Lotus 340R Material: 2x2 Twill pre-preg Carbon Fibre Finish: Polished Carbon Designed for Reverie by renowned aerodynamics writer and designer Simon McBeath, this straight Carbon Fibre rear wing is Autoclave cured for best properties and surface finish.

The entire Mansory Torofeo shows clear carbon fiber now, which isn't too difficult for this company as they have their own, in - house autoclave to produce this lightweight material to the exact specs they want, the result is a Huracan with a completely new design... the base is still visible, but there are so many parts that have been replaced by Mansory you could argue if this is still a Lamborghini... or a Mansory.

Autoclave cured for best properties and surface finish, the wing is lightweight & extremely rigid.

Option 2: If the part is thin and flimsy, has hollow areas or many fixings meaning autoclaving a mould tool repair section from a non-damaged similar or mirror area in carbon is not possible, then we can manufacture small epoxy putty or high TG wet laminated fibreglass or Carbon Fibre mould tools off mirrored areas of the part.

Wing Chord: 225 mm Wing Width: 1650 mm Fitment: Lotus 340R Material: 2x2 Twill pre-preg Carbon Fibre Finish: Polished Carbon Designed for Reverie by renowned aerodynamics writer and designer Simon McBeath, this curved Carbon Fibre rear wing is Autoclave cured for best properties and surface finish.

All of our Noble product range is designed and manufactured in - house to the highest of standards using the latest Autoclave construction methods, ensuring the best possible finish and material property.

The two - piece ultra rigid carbon fi ber autoclave wing element is not simply mounted to the existing OEM spoiler, but actually replaces it for complete bolt - on integration.

In this procedure, carbon mats are adapted in moulds and hardened under high pressure at high temperatures in an autoclave.

Every single element of the aerodynamic design is baked to a perfect surface quality in an autoclave and fitted precisely to the vehicle.

In the traditional Mansory style the Torofeo bodykit is made from carbon fiber in their own autoclave, from the impressively low front bumper over the 30 mm wider front fenders with integrated air vents to the nice side sills and modified rear fenders (40 mm wider) with air intakes in front of the rear wheels, the massive lower rear diffuser is the final part of the standard widebody kit.

The other is Dry carbon fibre which has a higher ratio of carbon fibre and is cured or cooked in a giant autoclave.

It appears that the entire body of the Cyrus is remanufactured from extremely light «prepress autoclave carbon» including both wing extensions for the front and rear and also side skirts and bonnet which comes with «power domes» in place of the grilles.

Of course, it is also made of high - quality carbon from the autoclave.