Sentences with phrase «own blower door»

Our services include home inspection, electronic report delivery, radon testing, well flow and pressure, well water quality, thermal imaging, energy audits, termite inspections by a licensed pest control contractor and blower door testing.

Highlights for this Chesterfield, Illinois Home Inspector include: Infrared / Thermal Scans, InterNACHI Member, Blower Door Testing, and Residential Home Inspections.

Using blower door tests and infrared cameras, energy audits measure air leaks and detect air infiltration or missing insulation.

Highlights for this Denton, Texas Home Inspector include: Home Inspection Reports Within 24 Hours w / Photos, Commercial & Apartment Property Inspections, New Construction Inspections, Moisture & Water Infiltration Testing, Home Energy Audits, Structural Inspections, Synthetic Stucco, Flat Roof Surveys, Dispute Resolution, Certified Septic Inspection, TRCC Phase Inspections, Residential Home Inspections, Pool & Spa Inspections, Septic System Testing, Flower Mound Termite Inspection Services, Licensed & Insured, Blower Door Testing, Well Water Testing, Infrared / Thermal Scans, and Expert Witness Testimony.

During the 36 years of the program, the growth of the program led to advances in our understanding of building technology and led to the development of diagnostic equipment like the blower door.

The first blower door test result was 0.59 air changes per hour (ACH), prior to insulating the envelope, which everyone was keen to improve on as it only marginally passed the passive house standard and was prior to fitting services, which are known to increase the risk of air leaks.

Air leakage performance was measured via multipoint blower door testing.

A diagnostic initial blower door test, done when the external envelope was completed on one of the development's show houses, took place on December 12 and delivered a worldbeating result of 0.16 air changes per hour (ACH), well inside the passive house standard of 0.6 ACH and the best result this magazine has ever noted for a masonry building.

During initial stages of the renovation project, some iterations of guarded blower door testing were performed as well.

The blower door test result, at 0.31 air changes per hour, lies well inside the passive threshold.

As part of the testing requirement, each home was blower door tested to measure the air tightness of the enclosure.

The Blower Door is an amazing tool.

They can also do diagnostic testing with it, by running the Blower Door and walking around the house to find leaks.

With the Blower Door running and the house pressure at negative 50 Pascals, a typical existing home might leak at the rate of 15 air changes per hour, which is written 15 ACH50.

We were the first state to adopt an energy code that made blower door testing mandatory.

The President's Sustainability projects included post-consumer composting in dining halls, occupancy sensors in vending machines, a solar tracker for research on the roof of the North Campus residence halls, and a blower door for physics students to conduct home energy audits.

and check out video of a successful blower door test from our friends at Dwell Development in Seattle.

-LSB-...] 7, 2010 First Blower Door Test successfully completed.

After the air barrier is complete, but before the drywall is up, we will conduct another blower door test to make sure that the building's airtightness is below the Passive House retrofit standard of 1 ACH50.

A blower door test provided a rating of 3ACH50 and revealed weak spots in the air sealing through the custom - made doors and at the sprinkler heads.

Most professional audits will include a blower door test.

Air changes per hour (ACH) is a measure of the air leakage of a building, calculated using a blower door at a standard pressure difference of 50 pascals (a unit of pressure) between inside the home and outside.

During a blower door test, all the windows and doors are closed, and they'll use a blower door machine to depressurize the home.

There is a lot out there on blower doors — here are few selected references you might want to look at:

- If you are a home builder or contractor, having your own blower door means you can check frequently as construction progresses to see how tight things are and spot leaks while they are still easy to fix.

Residential Pressure & Leakage Testing Manual, Retrotec, Inc An extensive manual on doing blower door testing

This DIY blower door does not, of course, have the flexibility, ease of use, and accuracy of a good commercial blower door, but on the other hand its not that difficult to build or use, its reasonably accurate, and it costs 1 / 100th of what a commercial door costs.

This DIY blower door uses a multi-speed furnace blower for the fan and is fitted into a window rather than a door.

If you build one of these blower doors, I'd love to hear how it works out.

It basically does what a commercial blower door does, but less automatically and less accurately.

If you have a blower door test done by your utility (or other service), they will likely point out some places where air is leaking, and you can have a go at sealing them.

I ran into these plans after building the blower door just above — not sure which is easier or cheaper or better.

There's no requirement for blower door or duct leakage testing, which is fine because the state energy code already requires builders to meet minimum thresholds for enclosure - tightness and duct - sealing.

Blower Door Basics, Frank Spevak, The Energy Conservatory Good presentation on air sealing and using a blower door.

- Some of the more time consuming variations on the blower door test that would probably not be performed in a Utility Energy Audit Program blower door test due to time limitations can be performed at with this door as its only your time.

One of the main reasons I decided to make a blower door is that I had a blower door test done by my utility.

Building my own blower door allows me to take my time finding and sealing leaks and to get a good idea what the leakage rate is for my house.

Home Energy Analysis: Highlighting the Blower Door Test, FESC Good explanation of how blower doors work and what you can learn from them

We did 8 blower door tests over a three or four year period during this stage.

If you are in the business of doing certified blower door tests, you need a good commercial blower door, but this homemade one may be a good alternative for other folks.

But, unless you want to pay for a 2nd blower door test, you won't really know how successful you were.

The major parts of the testing include building envelope leakage (aka blower door test), duct leakage test (Duct Blaster ®), and differential pressurization of zones.

CFM 25 outside (requires both blower door and duct blaster setup; leak to the outside is more significant than total system leakage for energy calculations).

You should be able to read it off one of the pressure taps that you have set up already to perform the blower door test.

Lord of the Blower Door Rings, eh, Leigha?

Such audit may include a blower door test, an infra - red camera test, and a furnace combustion efficiency test.

New, mandatory «blower door testing» as a step to measure air leakage and ensure buildings keep heated or cooled air inside

The lesson learned is that the blower door measurements can be tricky and may need to be repeated several times.

Prior to fitting the house with insulation and wallboard, the house was tested with a blower door and it met the requirement.

The incorrect measurement was detected after the fact by pictures taken by one of the architect's assistants that show the blower door reading followed two minutes later showing that the manometer was set to the blower door configuration.