Sentences with phrase «peak loads in»

«The peak load in late winter is probably what's driving mortality,» Langwig said.

It is primarily a thermal system in the Mid - Continent Area Power Pool (MAPP) region with a summer peak load in excess of 2300 MW, growing at 3 % -4 % per year..

Not exact matches

A chemically aged battery also becomes less capable of delivering peak energy loads, especially in a low state of charge, which may result in a device unexpectedly shutting itself down in some situations.

By keeping cash in reserve, you should counterintuitively load up on stocks right at the times of peak selling.

With a contract now in place between Tesla and the Australian Energy Market Operator (AEMO), the battery «will help solve power outages, reduce intermittencies, and manage summertime peak load to support the reliability of South Australia's electrical infrastructure, providing enough power for more than 30,000 homes — approximately equal to the amount of homes that lost power during the blackout period last year,» Tesla said in a statement.

Given the makeup of Chicago's roster and its implementation of the triangle, this was probably Pippen's maximum offensive output, as he peaked in offensive load at 43 (96th percentile) while the Bulls posted a respectable +2.2 rORtg when healthy, better than any offense Michael Jordan led before Phil Jackson arrived.5

It's because he can see into the future and see who has reached his peak and who has still got loads of unearthed potential hidden in them.

We would run three turbines now, anytime we need peak load, we will bring in an additional turbine or two and when the load goes down we will keep reducing again so that we can nurse the lake back to its original level.

Last year, when load - shedding reached its peak over a three - year period, the economy recorded its lowest growth in 15 years: expanding by 3.9 percent mainly, on due to a slump in commodities prices and energy supply deficit, which affected the manufacturing, industries and services sectors... the biggest contributors to the country's GDP.

As a means to cut down on double - parking and disruptive deliveries, the city will also pilot banning curbside loading entirely during peak hours in a large swath of midtown — from 45th Street to 50th Street, between Sixth Avenue and Madison Avenue.

Plus, the power draw at that peak load is much higher and the amount of time spent in that mode is much greater than on a standard PC.»

In the report, IEA says it expects concentrated solar power to become competitive for peak and mid-peak loads by 2020 in the sunniest placeIn the report, IEA says it expects concentrated solar power to become competitive for peak and mid-peak loads by 2020 in the sunniest placein the sunniest places.

In non-survivors, viral load is 100-fold higher than that of survivors throughout infection and does not decline after peak.

In the second pull phase, peak hip, knee and ankle joint angular velocities are around 420 — 470, 280 — 400, and 210 — 370 degrees / s, respectively (Gourgoulis et al. 2002; 2009; Akkuş, 2012; Harbili, 2012; Harbili & Alptekin, 2014) and are not affected by the load used (Harbili & Alptekin, 2014) or whether the lift was successful (Gourgoulis et al. 2009).

Comparing the power clean with the jump squat using the same absolute loads, MacKenzie et al. (2014) reported that peak GRF was greater in the power clean.

Enoka (1988) explored hip, knee and ankle joint power outputs in competitive weightlifters during the first pull and transition phases and reported that joint peak power output did not alter with increasing load at the hip, knee or ankle.

Comparing squat variations, Russell and Phillips (1989) reported that peak hip extensor moments were greater during the back squat than in the front squat, even when each variation was performed to a standardized depth and with the same relative load.

Similarly, Comfort et al. (2013) compared the power clean performed with 60 — 80 % of 1RM in untrained female athletes and found no differences in peak power output within this range of loads.

In the snatch lift as performed in competition, peak vertical bar velocity can reach 2.1 m / s (Garhammer, 1985; Okada et al. 2011) and the second pull is the fastest phase of the lift (Campos et al. 2006; Harbili, 2012; Korkmaz & Harbili, 2012; Akkuş, 2012; Harbili & Alptekin, 2014; Harbili, 2015), although peak vertical bar velocity is even higher with sub-maximal loads (Hadi et al. 2012In the snatch lift as performed in competition, peak vertical bar velocity can reach 2.1 m / s (Garhammer, 1985; Okada et al. 2011) and the second pull is the fastest phase of the lift (Campos et al. 2006; Harbili, 2012; Korkmaz & Harbili, 2012; Akkuş, 2012; Harbili & Alptekin, 2014; Harbili, 2015), although peak vertical bar velocity is even higher with sub-maximal loads (Hadi et al. 2012in competition, peak vertical bar velocity can reach 2.1 m / s (Garhammer, 1985; Okada et al. 2011) and the second pull is the fastest phase of the lift (Campos et al. 2006; Harbili, 2012; Korkmaz & Harbili, 2012; Akkuş, 2012; Harbili & Alptekin, 2014; Harbili, 2015), although peak vertical bar velocity is even higher with sub-maximal loads (Hadi et al. 2012).

The load at which peak power is achieved differs by exercise variation and is greatest with the heaviest loads in the power clean, moderate - to - heavy loads in the hang power clean and push press, moderate - to - light loads in the high pull, hang high pull and mid-thigh pull, and light loads in the jump shrug.

In a further similar study, Suchomel et al. (2015a) found that the vertical displacement during the jump shrug, the peak landing force, and the potential energy of the system at peak vertical displacement were all found at the lowest load used (30 % of 1RM hang power clean).

This suggests that light loads in the mid-thigh pull are best for maximising power outputs, while heavy loads are best for maximising peak force production, as with many other weightlifting derivatives.

Wretenberg et al. (1996) found that peak knee extensor moments were lower during powerlifting squats than during Olympic weightlifting - style squats, even though the powerlifting squats involved the use of greater absolute loads; Swinton et al. (2012) reported that peak knee extensor moments were greater in the box squat variation than in either the traditional or powerlifting squat variations, but there was no difference between traditional and powerlifting squats.

In a similar study, Suchomel et al. (2013) also found that the jump shrug displayed its greatest peak power output and peak velocity with the lowest load used (30 % of 1RM hang power clean).

Also comparing the effect of load but using near - maximal and maximal loads, Harbili & Alptekin (2014) found that when comparing the maximal load to the near - maximal load, there was a reduction in both peak barbell vertical displacement (1.25 vs 1.27 m) and peak vertical barbell velocity (1.72 vs. 1.82 m / s).

However, increases in muscle fascicle length are also likely dependent on the mechanical load incurred by the prime mover, as knee flexion (hamstring only) exercise seems to lead to greater adaptations in the hamstrings than hip extension (hamstring, gluteus maximus, and adductor magnus) exercise, even when muscle length at peak contraction is shorter (Bourne et al. 2016).

During bench press throws, Baker et al. (2001) explored the effect of load between 40 — 80 kg (31 -62 % 1RM) on peak power output in highly trained rugby players.

The relative load that maximizes peak power appears to be smaller in stronger compared with weaker athletes.

While the load was low and therefore only led to small - to - moderate levels of hamstrings EMG amplitude, the researchers did find that there was a time difference in the hamstrings EMG amplitude in that in the straight - leg lift the peak EMG amplitude occurred early in the lift but in the bent - leg lift the peak occurred later on.

In contrast, they found no difference in peak bar velocity at all loads except 75 % of 1RM when comparing the bench press throw immediately preceded by a fast eccentric muscle action and the concentric - only muscle action conditioIn contrast, they found no difference in peak bar velocity at all loads except 75 % of 1RM when comparing the bench press throw immediately preceded by a fast eccentric muscle action and the concentric - only muscle action conditioin peak bar velocity at all loads except 75 % of 1RM when comparing the bench press throw immediately preceded by a fast eccentric muscle action and the concentric - only muscle action condition.

In each case, the peak hip extension moment was observed at the point the load left the ground.

And an ESPN profile published today notes that Brady thinks guzzling loads of water prevents sunburns (he also states this in his new book, The TB12 Method: How to Achieve a Lifetime of Peak Performance).

Test of transfer (long - term): no trials have compared strength training using constant load vs. accommodating resistance on changes in sprinting ability, but if the band or chain resistance was set to produce a peak contract in the half or quarter squat bottom position, it might transfer as well or better than a full squat with constant load if the loading was challenging enough at that joint angle.

In contrast, Schellenberg et al. (2013) found that peak knee net joint moment during the deadlift did not increase with increasing load (from 25 % to 50 % of bodyweight).

Comparing the effects of different training variables, Swinton et al. (2011a) found that there was no difference in peak knee joint angles when using relative loads ranging between 10 — 80 % of 1RM with the straight bar and hexagonal bar deadlifts.

Common - sense reforms to teacher pension systems, such as those discussed in Education Next by Robert Costrell and Michael Podgursky (see «Peaks, Cliffs, and Valleys,» features, Winter 2008), would have a similar effect of making the returns to teaching more front - loaded.

Ah, yes, 1.2 g — not just a momentary peak in cornering load but achieved in steadystate cornering around a skidpad.

It's strong at every point of its range, loading up early, bellowing deeply in the middle revs before peaking at a scream at 7000rpm.

In addition, the electric pump is able to support the mechanical pump when peak loads apply, enabling a more compact and efficient design for the mechanical pump.

The single petrol variant in the 1 series line - up - the BMW 116i comes loaded with a turbocharged 1.6 litre engine that has a maximum power of 136bhp and a peak torque of 220Nm.

The peak 44o lb - ft of torque kicks in at just 1,750 rpm for towing and heavy load hauling.

Not all are in the blue - collar sector: hands and backs to work on the loading dock for a day or two during peak periods.

Now, with Standard & Poor's 500 - stock index down 8.6 % since peaking in July, many investors are asking whether it's time to dump stocks and load up on cash.

Inspired by our rich marine heritage, ACANA Wild Atlantic is brimming with wild - caught fish that mirror your cat's evolutionary diet.Our rich diversity of saltwater fish is delivered fresh and whole daily so they're loaded with goodness to nourish peak health without long lists of synthetic supplements and additives.Prepared in our Kentucky DogStar ® kitchens from America's best and freshest...

«Traditionally, consumers carry heavier debt loads between the ages of 40 and 60 as they are in their peak purchasing years,» said Becker in the release.

Vegas is in many ways extremely well situated to exploit solar thermal and geothermal energy, hopefully in some combined projects which would combine the peaking and base - load advantages of each respectively.

Wind, for example, you will find discussed in terms of energy needed, costs, energy produced, whether it can serve as peak load, base load, mini-generators, Liebig's Minimum, locations... etc..

As battery cars and plug - hybrids become more common the storage capacity and load - shifting (for charging) of the transportation fleet becomes very favorable in terms of load management — ditto the potential to use the fleet of parked batteries to assist during peak loads.

I think, to spur its development, we need electricity pricing that encourages investment in load - shifting, a guaranteed return for delivering a megawatt - hour at peak demand for more than it costs at the time of peak excess supply.

In June I heard a report about a new EU - wide study done in the UK that showed clearly that by combining all forms of renewables: wind all over Europe, solar in North Africa, hydo, hydro storage, solar thermal, and demand management, you could meet a slowly growing EU load with almost no natural gas for peaking plants to help level the loaIn June I heard a report about a new EU - wide study done in the UK that showed clearly that by combining all forms of renewables: wind all over Europe, solar in North Africa, hydo, hydro storage, solar thermal, and demand management, you could meet a slowly growing EU load with almost no natural gas for peaking plants to help level the loain the UK that showed clearly that by combining all forms of renewables: wind all over Europe, solar in North Africa, hydo, hydro storage, solar thermal, and demand management, you could meet a slowly growing EU load with almost no natural gas for peaking plants to help level the loain North Africa, hydo, hydro storage, solar thermal, and demand management, you could meet a slowly growing EU load with almost no natural gas for peaking plants to help level the load.