• Take the 2 ends off and eat those • Place the 6
pieces flat side down and top with chia seeds.
Not exact matches
Some
pieces might need to be propped up against the
side of the pan or against another pepper, if they don't have a
flat bottom.
Place the
pieces of lemongrass on a cutting board and with the
flat side of a knife, gently press down on the lemongrass to release the flavors.
Flat containers like Tupperware or Gladware allow to place the
pieces side by
side, rather than stacking them, and potentially have them stick together.
just get a nice long
piece of waxed dental floss (one could use thread too, but that can stick a wee bit), hold it
flat against the work surface, with a thumb on each
side, and slide it under the log of dough.
1) Melt butter 2) Dissolve sugar in melted butter 3) Mix sugar butter mixture with self - raising flour until homogenously mixed 4) Knead cookie dough with your hands on a cool,
flat surface, using a rolling pin to flatten it to 0.7 cm thickness 5) Use a round cookie cutter to cut out round
pieces 6) Arrange the cookie dough
pieces on a greased baking tray 7) Bake at 200 deg cel for 8 — 10 minutes or until they turn slightly golden brown 8) Spread dulce de leche on one cookie, and cover it with another cookie 9) Coat the
sides of the cookie sandwich (the parts where dulce de leche is exposed) with shredded coconut
If chicken isn't flattened already, place one
piece at a time into a gallon sized freezer bag then, using the
flat side of a meat mallet, pound your chicken to 1/4 inch thickness.
I find it useful to take 2 thin,
flat pieces of wood 1/4 ″ thick and put them on both
sides of the dough as I roll it out to give me an accurate thickness.
BUT, if you put them in a ziploc bag and crush them with the
flat side of a tenderizer, then, they're perfectly contained in perfectly small
pieces to sprinkle all over a cake.
BUT, when you contain them in a nice ziploc bag and then «crush» them with the
flat side of a meat tenderizer, there's no runaway (or flyaway)
pieces.
Working quickly so ice cream doesn't melt, cut block lengthwise into 5 equal rows and then crosswise into thirds so you have 15
pieces measuring about 4x1 1/2» Working with 1 brick of ice cream at a time, use a thin metal spatula to place on a
flat -
side - up cookie and top with a right -
side up cookie.
It's a simple
piece of wood, really - a
flat 1 inch thick board, with raised
sides nailed in, though worn down from the years of use.
At this point, you have what looks sort of like a funky T. With the
side that has the
flat side of the purl rows on it facing in, fold up the squares so that the long
piece makes a box and the two extra squares fold in to make the top and bottom.
If your boats aren't sitting well, slice a long
piece off of the bottom
side to lay
flat.
The splitter plate is a
flat piece of metal with hooks or bars on each
side.
Leaving a smaller circle at the center of the
piece of paper
flat, you could bunch the
sides together in a pleated pattern; in fact, some water - cooler cups are manufactured on this exact design.
Solid 1 -
piece casting; wide
flat bottom; kg / lb markings (on the same
side); no ridges on the handle; color - coded.
If you don't want the candy «cup» look, with the ridges on the
sides, then you can remove the candies from the muffin cups just before covering with chocolate and set on a
flat piece of parchment paper to firm up.
This rimless design features mono block color tinted lenses, a
flat top, and unique
side pieces.
Finished in a
piece of purple satin from one - shoulder
side neckline to floor length hemline, this dramatic dress
flatters exquisite applique at front bodice stretching down along midriff from where a long cascading skirt drapes down with a high slit at
side leg.
Run a
flat iron throughout your hair, and tuck the front
pieces behind your ear on both
sides.
Side Shirred V - Neck Swimsuit by Shape Benefits ®: Dive into a slimming silhouette with this one -
piece swimsuit with figure -
flattering tummy - control lining.
With the front of the bed (the long
sides) laying
flat on the patio, we fit the shorter
side pieces vertically onto them so we could measure where we wanted the braces to go and marked those spots with a pencil.
On the flip
side, shapeless and oversized
pieces, or clothes that emphasise your small bottom aren't
flattering to a triangular body type.
Forever
flattering with a flirty blouson silhouette over a fitted lining, our one -
piece is secretly styled with stay - put tape, boning at the
side seams, and an adjustable strap that can be worn halter - style or not at all.
Featuring a
flattering draped style and
side slit accent, this
piece will turn heads as soon as you walk in the room.
Sexy and
flattering way, in an allover palm leaf print, this plus size one
piece swimwear features crisscross straps in the back and ladder cut out design at the
side.
The two -
piece side view mirrors are responsible for helping you back up — the lower part of which is convex to show your enormous blind spot, the upper
flat and tall to show traffic.
BMW emergency call, BMW teleservices, On board computer, Service interval indicator, Servotronic PAS, Stop / start button, Auxiliary socket for external device, BMW professional radio / CD / MP3, DAB Digital radio, Body coloured bumpers, Body coloured door mirrors, Brake force display, Chrome kidney grille with black vertical slats, Daytime running lights, Electric adjustable heated door mirrors, Electric front / rear windows with one touch / anti pinch, Follow me home headlights, Headlight wash system, Heated rear window, High gloss shadow line, M aerodynamic bodystyling, Rain sensor with auto light activation system, Remote controlled 2
piece retractable hard top, Soft close bootlid, Xenon headlights, Air filter, Ambient interior lighting, Anthracite headlining, Anthracite Velour floor mats, Dual zone automatic air conditioning, Front centre armrest, Front head restraints, Front passenger isofix child seat attachment, Gearshift paddles on steering wheel, Leather gear knob / gaiter, Leather handbrake, M Sport multifunction leather steering wheel, Reach + rake adjustable steering column, Reading lights, Sports seats, Storage compartments in instrument panel and centre console, ABS / EBD, CBC -(Cornering brake control), Crash Sensor - activates hazard / interior lighting + unlocks doors, Driver / Passenger airbags (Impact dependent), Dynamic Traction Control - DTC, Electronic parking brake, Front curtain airbags, Front passenger airbag deactivation, Front
side airbags, Fuel cut off safety device, Pyrotechnically pre-tensioned front seatbelts, Run
flat tyres + tyre pressure monitor, Warning triangle and first aid kit, Locking wheel bolts, Remote central locking, Thatcham cat 1 remote alarm / immobiliser, Dynamic Drive, Dynamic stability control
The huge
side intakes allow smaller, lighter radiators; the
flat underbody culminates in an upswept double - diffuser made from one
piece of carbon.
Introduced for the 1987 model year and based on the Porsche 911, the CTR featured an enlarged and highly tuned version of Porsche's 3.2 litre
flat - six cylinder engine, lightened body panels, an integrated roll cage (adding chassis stiffness in addition to occupant safety), upgraded suspension and braking systems, a custom - designed transmission, and several unique trim
pieces such as polyurethene bumpers, and the use of the
side mounted oil filler (a Porsche feature for the 1972 MY only) necessitated by relocating the oil tank forward to clear the intercooler on that
side.
Bluetooth hands free telephone connection, On board computer, Service interval indicator, Servotronic PAS, Stop / start button, Auxiliary socket for external device, BMW professional radio / CD / MP3, USB / audio interface, Body colour heated door mirrors, Body coloured bumpers, Brake force display, Chrome kidney grille with black vertical slats, Electric front / rear windows with one touch / anti pinch, Follow me home headlights, Headlight wash system, Heated rear window, Rain sensor with auto light activation system, Remote controlled 2
piece retractable hard top, Soft close bootlid, Xenon headlights, Air filter, Ambient interior lighting, Anthracite Velour floor mats, Dual zone automatic air conditioning, Front centre armrest, Front head restraints, Front passenger isofix child seat attachment, Leather gear knob / gaiter, Leather handbrake, Multifunction sports leather steering wheel, Reach + rake adjustable steering column, Reading lights, Storage compartments in instrument panel and centre console, Smokers pack, ABS / EBD, CBC -(Cornering brake control), Crash Sensor - activates hazard / interior lighting + unlocks doors, Driver / Passenger airbags (Impact dependent), Dynamic Traction Control - DTC, Electronic parking brake, Front curtain airbags, Front passenger airbag deactivation, Front
side airbags, Fuel cut off safety device, Hill start assist, Pyrotechnically pre-tensioned front seatbelts, Run
flat tyres + tyre pressure monitor, Warning triangle and first aid kit, Locking wheel bolts, Remote central locking, Thatcham cat 1 remote alarm / immobiliser, Dynamic Drive, Dynamic stability control
Number 001's exterior includes Mr. Norm's custom
flat - black striping and badging, Rodtana Design's 2 -
piece custom Mr. Norm's Super Challenger wheels,
side - vents and a custom splitter.
In the mid-20th Century shared unreality that was «Caroland» it was somehow viable, with intentions that were quite probably on the right
side of honest, to make a sculpture — in this case, Stainless
Piece C, 1974/5 — that sat
flat on the floor and rose up no more than a couple of inches, so you looked down upon it like a relief laid horizontally (I made a few like this myself); and to make it out of a few scattered (or were they artfully composed?)
Robert Whitman is scheduled to perform two
pieces, Prune
Flat, 1965 and Local Report:
Side Effects, 2017, at the Musée du Louvre as part of FIAC's Hors les Murs performance program, Parades for FIAC.
In truth, a
piece of painted masonite, with a hint of perspective along one
side, supports a logo - like form filled with
flat brushwork, which has been simulated to suggest weight and density.
The large works that have occupied him since 1969 are, in brief: Hubris, commissioned for the University of Hawaii at Manoa, one of Smith's most open and regular
pieces to date, which consists of a two - section, 9 - by - 9 grid in black concrete, one half thin slabs at ground level, the other half the same grid raised to 3 feet 3 inches by a four -
sided pyramidal module; Batcave, a complex environmental interior designed to «mold space and light» rather than material form, at the Osaka World's Fair, a new version of which will be shown soon at the Los Angeles County Museum; a gigantic triangular sculpture inserted into a Californian mountainside; a labyrinthine water garden for a delta; Smog, a huge new horizontal
piece made from the dismantled components of Smoke (which was made for the Corcoran's «Scale as Content» show, 1967); Haole Center, a sunken square «pavement» within a square stone sculpture, with a metal ladder leading down below the earth's surface; two related monumental sculptures on platforms (Arch and Dial); and a
flat 81 - block grid proposed for downtown Minneapolis.
Swedish
flat - pack furniture extraordinaire Ikea has a number of
pieces of furniture, mainly
side tables and lamps, that have Qi wireless charging points built in to them.
The OnePlus X potentially bests the Honor 5X with a solid
piece of glass on both
sides of the phone and a wonderfully - crafted metal frame that feels much nicer than the Honor's, though the
flat back makes it a bit tougher to hold and lets it slide around when placed on
flat surfaces.
Is this the lap
siding and does it lay
flat when you butt it up to each
piece.
Step 3 Screw up the bulb socket on either
side of the
flat lid, sandwiching the lid between the two
pieces.
Screw up the bulb socket on either
side of the
flat lid, sandwiching the lid between the two
pieces.
Step 5) To join all the
pieces, place the three -
piece front section right
side up on a
flat surface.
Step 5) Open the zip on the back
piece and place right
side up on a
flat surface.
Step 3) Place one main fabric stocking
piece right
side down on a
flat surface and place one interfacing
piece on top, matching the edges all round.
As a mater of fact, Ash dropped the rough
side of a heavy
piece of tile
flat on the countertop (by accident) and it didn't leave a mark.
I figured out that I need to put some molding on the front of them to help hide gaps on either
side of the stairs, so I found this
flat piece that fit on there perfectly to make the stair treads look better AND hide the gaps on the
sides.