Keep it stocked with toys, a synthetic sheepskin rug,
a piece of wood attached to the inside (like a baseboard), and when you put him to bed at night, a nice veggie or fruit snack.
Also, is your chair rail just a low profile
piece of wood attached right where the dreaded wallpaper runners were?
Not exact matches
At the hardware store, buy several different types
of hooks and latches and
attach them to a
piece of wood.
If necessary, use a hammer and nails (or a drill) to
attach a few long
pieces of wood to the bottom
of the crib.
You could definitely add a base to these — I would cover either a
piece of wood or thick chipboard with white felt and
attach the snowman to the base.
He then added short
pieces of a 1-1/8» hardwood dowels to
attach the casters to the scrap
wood.
The above image is an upside down view
of the dresser with scrap
wood and hardwood dowel
pieces attached.
Then use a stainless steel butt hinge to
attach the flexible back leg to the top front horizontal
pieces of wood.
The matting insert is
attached to frame - it is one
piece and is trimmed with a thin strip
of similar gold
wood.
When you said a sub floor, are you speaking
of a
piece of wood the width I need for by table and
attach it to the org top then add my
wood planks?
To secure the final side
attach a couple
of spring clips along the edge to stop it opening up and slide a
piece of wood through at the top along the edge for support and
attach it to the roof with cable ties.
Some rabbit owners make custom baseboard protectors by using
pieces of wood with hinges that stand up to block the boards, wire and plastic storage cube
pieces that snap together and lean up against the wall, short
pieces of wooden fence pickets individually
attached with removable adhesive
pieces (i.e. Command ™ strips) so they can be replaced as needed, and other creative protective options.
With a few
pieces of constructed
wood attached to the stretcher, James is able to evoke windows and cosmic spaces populated by a lone house.
Attached to the top
of the canvas are scraps
of wood and
pieces of furniture trim, adorned with bits
of tin and salvaged fabric.
One
of his earliest
pieces that was destroyed has been recreated here — rectangular blocks
of wood stacked up ten feet high but not
attached in any way but gravity.
In «Tablet 142» (1964 - 65), She
attached thin undulating
pieces of wood, most likely made by planing a board, to the front
of four vertical panels that have been abutted together and coated with layers
of white paint.
In the early 1960s, he started
attaching objects
of personal significance to the canvas, including paint brushes, screwdriver and
wood pieces.
A chain saw with a bullhorn
attached, both realistically rendered in
wood, it's a
piece of impressive craftsmanship and a surrealistic dream image
of political violence.
Cut four angled
pieces of medium - density fiberboard to fit your picture, join them together with
wood glue and corner braces, and
attach a hanger to the back.
Because we used large ones this time, we
attached pieces of scrap
wood to the wall first and then
attached the cleats.
One
of the
pieces was
attached to the plywood with
wood glue and finishing nails at the edge.
Then the second
piece of plywood was
attached to the corner
of the scrap
wood and plywood to create an L shape.
We just took small
pieces of wood strips,
attached them to the wall, and put MDF on top
of the strips.
A Kreg Jig is a tool that helps you build projects and
attach two
pieces of wood together quickly, strongly, and easily.
I
attached a metal file holder to a
piece of wood that slides in and out
of the cabinet.
We
attached a little
piece of trim with
wood glue and painters tape to the top edge
of the wallpaper border:
Step 10)
Attach your letters to a reclaimed
piece of wood or pallet sign.
After that, we used Liquid Nails to
attach pieces of wood and thin, luan plywood to the facade to create dimension...
Take a rustic
piece of wood and
attach metal wheels to create your very own trolley service!
We planned to install a countertop to span the width
of the wall (over the cabinet and the open space to the left
of the cabinet so we
attached support
pieces of wood that the counter top would rest on over the open space.
To
attach them we used a nail gun, brad nails and a little bit
of wood glue in between each
piece.
So, rather than just secure a pretty oil rubbed bronze holder to the wall, I
attached it to a
piece of stained scrap
wood to create a shelf for decorative accessories like a small plant, air freshener, vase
of flowers, extra t.p. or even just cell phone accident prevention, if you know what I mean.
The shelf is sitting on
pieces of wood that are
attached to the sides
of the cabinets, and there is a face frame on the shelf that hangs down and hides that gap between the microwave the shelf.
Run a bead
of liquid nails along the side
of one
of the
pieces of wood for the shelf legs,
attach to the second
piece, and then clamp off and let dry.
Run a bead
of liquid nails along the top part
of the leg
piece, and then using an angle square, line up the shelf legs under the markings on the shelf length and
attached with screws, be sure to screw down below the surface
of the
wood.
The purpose
of the wax paper is to keep the liquid nails from drying and
attaching the «shelf top» to the «scrap»
wood pieces.
Next, I used my plywood scraps and a brad nailer to
attach the two
pieces of wood — quick and easy!
Then add another smaller
piece of wood on top that is painted to allow the Petal & Plume Script to stand out and then
attach a rusted element on top
of it.
So, my husband added a
piece of wood to the top and to the sides and that is what the rail is
attached to.
Using a generous amount
of wood glue,
attach the 5
pieces of your 1 × 4 to the particle board and cover with something heavy (or clamp if you're fancy!)
Once my holes were drilled, I used
wood glue to
attach the top
piece of wood to the bottom
piece and then used clamps on the ends to secure the
wood while the glue dried.
Tie a
piece of burlap on a flat wooden wreath form first to hang it and then
attach the
wood slices in a single layer using an adhesive.
I also found a larger
wood piece that I thought would look really pretty in the center
of the mantel, so I
attached that also with some
wood glue and a few brad nails.