Sentences with phrase «pine boards»

In the dining room the owners pulled up original cork flooring to reveal cypress pine boards underneath.

For a little more money, consider replacing the paneling with horizontal pine boards, for a seaside cottage look.

The shelves were made with pine boards that are 12» deep.

My dad was a wood worker and I learned early on to only use strong wood — poplar instead of pine boards.

Last time I visited, I showed you how almost anyone can build a simple nightstand using pine boards and -LSB-...]

Preprimed 1x8 pine boards spaced 1⁄8 inch apart create the look of shiplap.

The ceilings were a covered in pine boards, but they were stained a dated yellow color.

Our dining table is even more special because my Dad built it out of eastern pine boards with beautiful pine farmhouse style table legs.

For this project, I used 2 quarts of BEHR paint, two 1» x4» x12» common pine boards, and 3 sheets of 1/2» x2» x4» Medium Density Fiberboard.

Her flooring choice — pine boards covered in a thin coat of watered - down paint — contributes to the ambience.

This simple DIY hutch is made from solid pine boards and can be done in a few hours with basic tools.

We used two 1» x4» x12» common pine boards for the shelf supports and 3 sheets of 1/2» x2» x4» Medium Density Fiberboard (cut down to size for our closet) for the shelves.

These are just 10 ″ x10 ′ pine boards y ’ all — to the tune of $ 9 each at Home Depot, so this entire project was under $ 30.

Wide pine boards, nailed horizontally and painted white, give character to these kitchen walls.

I used pine boards with lots of character for a good rustic look.

It is built using pine boards.

Some basic materials required for this project include flanges, pine boards and of course galvanized pipes.

Knotty pine boards bring rustic cabin appeal to new and old kitchens.

Note: You don't have to limit yourself to pine boards.

Using pine boards, plywood and basic tools and supplies, you can make DIY stacking storage cubes with ease.

So we took the legs off and then built a frame with them out of 1X4 pine boards.

This project uses three key materials and these are iron pipes, pipe clamps, and pine boards.

As for the pine boards, the guide recommends 6ftx10inch varieties.

Here, 1» x 4» pine boards, spaced about a foot apart, offer the look of custom paneling at a fraction of the price.

Do you mean the white part of the wall between the pine boards?

... I painted some 1 × 4 pine boards using the same techniques from my «Barnboard» Tutorial using mint, gray, and a splash of turquoise (GASP!).

It was just basic pine boards.

In this family space, knotty pine boards and timbers accentuate kitchen doorways and frame the breakfast bar to create the look of a large pass - through window.

I opted to use standard pine boards that are less expensive because they will often times have some sort of irregularity to them like knots or bends.

Then I created the barn door «Z» using 1 × 6 ft pine boards.

Your list of materials for this project will include pine boards, fasteners, dowels, and pocket hole screws.

The materials needed for the project include pine boards, metal braces, and pine board.

We are getting ready too start a similar project in our attic (soon - to - be bonus room), and there are already some pine boards up there that are not tongue and groove.

Cedar planks and pine boards are the only primary materials you will require to put this X sofa table together.

I love the pine boards with blue and white paint!

As for the shelves, we just used two 2 ″ x12 ″ pine boards from Home Depot.

The planks in our previous house were thick and long pine boards bought from a lumberyard.

She salvages pine boards, windows and a birch tree that with a little ingenuity comes back as a bedside lamp.

Ben built us a 12 foot long laminate counter top and I stained twelve - foot long 2 by 12 pine boards, to create open shelves.

I used your method to age a whole wall of pine boards on my shop.

Lowe's had pre-sanded and pre-cut pine boards in the perfect sizes ready to go so we used those and painted them white (Valspar Swiss Coffee) before doing the shelf installation.

2 — 1x2x8 boards — I used cedar instead of pine boards.

We placed a couple of pine boards across them to set the plants on.

The wood is just regular ol' 1 ″ x6 ″ pine boards, and I * think * the guys are planning to finish attaching them to the ceiling tomorrow and Monday, so hopefully I'll have some more fun progress pics to share with you next week!

We have had wooden countertops for a number of years (made from 12 inch wide pine boards) and I love it, and we abuse it!

although we have $ 900 worth of rough cut pine boards sitting in there..»

We purchased 6 black metal brackets from Bunnings and some pine boards that we cut to size and stained using Feast Watson Black Japan stain (which is my favourite stain!).

It's all 15 - foot, knotless pine boards — longer than anyone can find now.

We bought 2X10 pine boards that had beautiful knots and some character.

My husband picked up the tongue and groove 6 inch wide pine boards from the home improvement store.