There is a
standardized pinout configuration for automotive relays, and pins 85 and 86 are the «control pins».
The connections named are power +, power -, Hall power, Hall ground, Hall sensors 1 and 2, but no other data is available,
including pinouts.
Studying the
PCM pinouts seems to indicate that there are just two DLC pins connected directly to the PCM and they are: PCM pin 5 to DLC Terminal 10 and PCM pin 79 to DLC Terminal 7
Purchase order flow chart ex les also dvi
d pinout diagram besides.
In researching the pin - outs, it appears that the iPhone and HTC type Microphone / Headsets have
opposite pinouts on the ground and microphone.
We take you on a tour of the most commonly used slots, connectors, and
pinouts.
In this case a code read and then checking each wire against
a pinout would rule this out.
You'll need to find
a pinout of the coil or a wiring diagram for the car to work out which pin is which.
The standard has many parts, but it primarily designated a connector,
its pinout, and allowed one of five different electrical signalling...
But I have
no pinouts, and no combination of connections so far has provided any sensor output.
I would need a part to be able to look up
the pinouts for that part.
when you stated you have named connections but need
the pinouts I am assuming you have the part but not the control module so please rephrase this.
The OBD connector of the truck has JUST
the pinout for Can (can - High and can - Low), Electric (Ground and +24 V), and k - line (k - line and l - line).
Create colored wiring diagrams that accurately reflect components, connectors, wire colors,
pinouts, and call - out information