Sentences with phrase «piston hydraulic pump»

The newly choreographed hood has resulted in an opening time of only 14 seconds due to a new five - piston hydraulic pump.

The hydraulic pressure to the servos is supplied by a high pressure radial piston hydraulic pump.

Not exact matches

As its hinged joints heave and fold, they pump hydraulic pistons, which in turn spin high - pressure fluid generators.

More hydraulic fluid is pumped into the lower compartment, which raises the piston and in turn compresses the water — only a little, though, because water is highly resistant to compression.

Engine Type: Chevy Small - Block V - 8 Displacement (cu in): 350 Bore x Stroke (in): 4.000 x 3.480 Block (P / N 10105123): Cast - iron with 4 - bolt main caps Crankshaft (P / N 14088526): Nodular iron Connecting Rods (P / N 10108688): Powdered metal steel Pistons (P / N 12514101): Cast - aluminum Camshaft Type (P / N 24502476): Hydraulic flat tappet Camshaft Lift (in):.435 intake /.460 exhaust Camshaft Duration (@.050 in): 212 ° intake / 222 ° exhaust Cylinder Heads (P / N 12558060): Vortec iron; 64cc chambers Valve Size (in): 1.940 intake / 1.500 exhaust Compression Ratio: 9.1 nominal Rocker Arms (P / N 10089648): Stamped steel Rocker Arm Ratio: 1.5:1 Water Pump (P / N 88894341): Cast iron, long - style Flexplate (P / N 14088765): 12.750» Recommended Fuel: 92 octane Ignition Timing: Base 10 ° BTDC, 32 ° Total Maximum Recommended rpm: 5,500 Balanced: External

Also see Steel Braided Hoses Brake Lining Material: A composite of matrix binder, metallic or ceramic particles and friction material that also coats the disc surface Brake Pads: The pad consists of a steel backing that fits into the locking mechanism of the calipers and a layer of about 10 mm of friction brake lining Brake pistons: Is a hydraulic actuated piston that transfers the hydraulic pressure from the master brake pump to cause the brake pad to bind with the disc.

All internal engine parts including pistons, piston rings, piston pins, crankshaft and main bearings, connecting rods and bearings, camshaft and bearings, timing chain / belt, timing gears, intake and exhaust valves, valve springs, valve guides, oil pump, push rods, rocker arms, rocker arm shafts, hydraulic and solid lifters, intake manifold, distributor shaft and housing, harmonic balancer, timing gear cover, and vacuum pump.

All internally lubricated parts: Engine block, cylinder heads, intake manifold, pistons, piston rings, wrist pins, connecting rods and rod bearings, timing chain and gears, valve covers, rocker arms / shafts and bushing, valves, valve springs, seats and guides, valve push rods, hydraulic valve lifters, oil pump, oil pan and fuel pump.

Hydraulic lifts have fluid in them, and moving the lever in half pumps down increases the pressure on the fluid, forcing the piston up and lifting the tabletop.

The company's wave - power system acts as a sort of hydraulic pump that converts the vertical motion of waves into pressurized sea water, which in turn drives a piston that forces sea water through a turbine.

A perhaps simpler approach is to use wave motion to power hydraulic pistons, as with the Sea Dog pump developed by Independent Natural Resources Inc in the USA www.inri.us.

The wave system is based on a hydraulic power take - off system, using a double function piston pump to transform the energy from the wave into water pressure that is then sent through a turbine, thus generating electricity.