Sentences with phrase «piston motor»

Because the data are always noisy and variable, the command is based on probability; but we program the piston motor to generate movement only when the probability is high — usually in the 70 - 90 % range.

A four - cylinder piston motor air compressor with 1/4 horsepower behind it, the Master Airbrush is an excellent choice for hobbyists and renovators alike.

And the single piston motor is quiet and discreet.

Now, however, Outboard Marine Corporation believes it has found a rotating piston motor that really works.

Not exact matches

Think about an engine and how it works: each part scoops the next part which scoops the next and the next — the ignition key turns, the battery circuit is closed, the starting motor rotates the turning gear, the turning gear rotates the crankshaft, the pistons move up and down the cylinder, and so on.

This being the case, the piston filler is excellent for filling motor oils.

Brooklyn will have a quick turnaround and head to the Motor City to take on the Detroit Pistons on Wednesday.

Motor manufacturers have known for a long time that their problems would be vastly simplified if they could find a piston that would spin instead of bouncing.

Most compressors incorporate a crank, which converts the turning motion of the compressor's motor into the in - and - out motion of a piston.

The new compressor uses the motor to drive the piston itself, increasing efficiency.

An interference motor is one where the pistons and valve train occupy the same space inside the engine, but at different times.

The first mechanical part to fail will not be a piston ring or crank or anything in the bottom of the motor.

Credit the new parts: The Volkswagen Golf R gets a different cylinder head, valve train, pistons and turbocharger, plus a higher - pressure fuel injection system than the GTI's motor.

Only we don't remember that the brake pedal not only engages brakes that have gigantic, 16 - inch front rotors pinched by six - piston calipers but also sends the electric motors spinning backwards to send regenerated electric power into the Porsche's battery pack.

Peugeot claims that the decelerative force provided by the electric motors lessens the needs for drivers to use the four - piston 380 mm front vented discs and 290 mm rear, as the car stores this energy within the battery while slowing down.

The second system is the regenerative braking, which inverts the motors when you stand on the brake pedal to recharge the batteries, and the third is the conventional brake system, which uses carbon ceramic discs and six - piston calipers.

In addition to all the usual upgrades — forged rods and pistons, custom - ground camshafts, ported cylinder head, etc. — the motor was modded with a second turbo and elaborate, immaculately fabricated intake and exhaust manifolds.

A Fairbanks - Morse and some of the big marine engines are the best of both worlds, because it gets rid of the valvetrain and adds a second crankshaft, being opposed piston (not opposed - cylinder like a boxer motor).

In other words, for TDC on the exhaust stroke, is the piston still X inches from the plug on both strokes, or is it located at the bottom of the motor at TDC on exhaust?

Strip away the turbos, drop in some high - compression pistons and prickly cams, have a play with the firing order and speak to Mr Akrapovic and my project has a suitably special motor.

Your are hearing your piston - Air cooled motors have extra piston clearance between the cylinder and the piston due to increased expansion due to more heat.

As stated above these tools are helpful in identifying problems with the core of the motor - how effectively will the pistons, rings, valves, etc function or is there excessive wear or damage.

in a normal engine the piston will have one if not more «oil rings» these are to keep oil from reaching the combustion chamber - when your motor starts smoking bad its because the oil is managing to slip by those rings and burn with the gas in your combustion chamber..

Standard Equipment: 3.0 - liter supercharged V - 6 Electric motor, NiMH battery Paralell full hybrid drive system 8 - speed Tiptronic S transmission w / auto stop - start Porsche traction management Permanent 4 - wheel drive Porsche stability management 14.2 ″ vented front rotors w / 6 - piston calipers 13 ″ vented rear rotors w / 4 - piston calipers Multifunction, leather - wrapped 3 - spoke steering wheel 4 - way adjustable steering column 8 - way power front seats w / memory 10 - speaker AM / FM / CD sound system Bluetooth Power moonroof Power liftgate One - touch power windows Heated, retractable, power side mirrors Trip computer Homelink

The outcome would be the same as leaving some fine sand on the top off the piston while assembling the motor.

The starter is an electric motor powered by the battery that turns the crankshaft for the the pistons to operate.

The engine seems to say Countach, too - turn the key, and the starter motor's monotonous whir suggests that there are twelve pistons being heaved up and down.

The motor was improved with CT20A turbochargers, intercooler, and the other pistons fitted to compression ratio of 8.5.

For the uninitiated, that means melding a 129 horsepower, high - speed electric motor that drives the front wheels to a 228 - hp, 1.5 - litre turbocharged triple (yes, but three pistons in something that costs just slightly less than 150 large) that powers the rears and feeding both through a combination of 7.1 kilowatt - hours of lithium - ion ensconced in the «transmission tunnel» and a microcar - sized 42 litre gas tank just ahead of the engine.

It has a SBC Strocker Motor with Aluminum heads, Forged piston, Scat crank and rods.

I took the stroker motor out and put in a fresh rebuilt 350 SBC, bored 40 over with Hypereutectic pistons.

A «through the road» hybrid vehicle uses a conventional piston engine to power two wheels, with electric motor / generators on the other two wheels, giving a form of part - time 4WD.

These 6 piston Brembo 14.5 inch ventilated rotors are a masterpiece and enable breaking directly from the motor.

All of these systems provide inputs to the engine's computer, which runs a fast - spinning electric motor that operates the actuator arm that changes the piston travel.

FM pistons with negative bias of piston ring are also installed in this motor.

This is due to the fact that both motors are equipped by different crankshafts, connecting rods and pistons.

The high - performance brakes of the new BMW M2 are also a product of motor sport and can be quickly identified by their brake callipers (front axle: four - piston fixed callipers, rear axle: two - piston fixed callipers), which are painted in a blue metallic finish and display the M logo at the front axle.

Instead of the separate pump and fluid accumulator that most ABS systems use, ABS VI uses electric motors to move pistons that block and unblock brake fluid lines to increase and decrease pressure - and squeeze and unsqueeze brakes.

It's clear this can't really be considered an EA888 engine when you consider the quattro sport concept motor has a lightweight crank, revised pistons, a new cylinder head and a specially created cast alloy block.

While most hybrids are all about efficiency, Lexus is trying to justify V12 pricing for their flagship model and are backing up their claims with a 5.0 Liter gas burning V8 and a powerful electric motor to produce a maximum output of 439 HP with four less pistons than the competition.

Cylinder heads and cam covers Crankshaft: crank pin diameter, connecting rod big - end bearing size and crank counter-weight size are all reduced, to reduce reciprocating weight Crank main bearings and caps High - strength forged connecting rods Pistons and piston rings Titanium inlet and exhaust valves Intake manifold and throttle body Redesigned Variable Valve Timing - intelligent Electric motor (VVT - iE) Revised Lexus D - 4S dual injection system Four - into - one exhaust headers and heat insulators Oil pan and baffle plate Alternator clutch system Engine and transmission oil coolers Spark plugs

Tjin Edition RoadShow Camaro Builder Neil Tjin and his assembled teams put together this Vortech blown beast, complete with a fully rebuilt LS3 motor, an Air Lift air suspension, SSBC eight - piston calipers, and 22 - inch three - piece iForged wheels in front, 24s in back, covered with Falken FK - 452 tires.

For this motor, Preuninger and his team also developed a new intake system, a new oil pump, motorsports - inspired piston rings — made out of what Preuninger calls «Star Trek material» — and coated cylinder sleeves.

It is equipped with power steering, front and rear stabilizer bars, speed activated rear spoiler, digital motor electronics with E-Gas on - board diagnosis system, 4 - piston monoblock brake system front and rear, and anti-lock ABS - 5 brakes, It also features a roll hoop, fog lights, power operated top and windows, AM / FM stereo with CD player, front and rear luggage compartments, automatic climate control with air conditioning, windshield antenna, and front seats with power backrest.

Exhibitor: Works Engineering Phone: [phone] Email: [email protected] Website: www.works-engineering.com Booth Number: 34238 Customizer / Builder: Rob Parsons Powertrain / Drivetrain: 5.7 L V8; Comp Cams valvetrain; Wiseco pistons; Callies Compstar rods; Canton Racing oil pan; Accusump accumulator; Vortech supercharger with A&A Corvette bracket; 60 - pound injectors; FAST fuel rails; Aeromotive fuel pump and FPR; Carter lift pump; Works Engineering surge tank and power steering reservoir; BBK throttle body; Mishimoto radiator, oil cooler and intercooler; Tremec Magnum six - speed transmission; Science Friction twin disc; Hooker headers; custom exhaust; Turnkey Innovations engine harness; custom electrohydraulic clutch system Chassis: KW Suspension coil - overs; Ma Motorsports modified knuckles and control arms; Tein tie - rods; Sikky motor mounts; Kaaz LSD; Works Engineering big brakes; custom removable front and rear half tube frame; Painless chassis harness; Varsttoen 18x9.5 front and 18x10.5 rear wheels Exterior: Imvee Aero body kit; origin front and rear over fenders; Lexan rear windows; D - Max hood Interior: Driven steering wheel; Bride seats; Takata harnesses; ASD hand brake; Sparco weld - on quick release; custom hand controls; custom adapted Mastershift electronic shifting system; custom rollcage

A long list of engine designs have been pushed as replacements for the 19th - century pistons - and - sparks systems still under the hood of almost every motor vehicle on roadways today.

Engines were likewise rated by «piston speed» and with electric motors we had a measure «Torque» relating foot pounds with RPM however each country had their own horse to start with.

The motor must be less than 1.5 - brake horsepower and if internal combustion, must be less than 50 cc piston displacement.

I remember a time long ago (1971) after my auto mechanic had just started my tuned up ’68 Plymouth, when I told him that I thought my motor sounded like a smooth symphony of pistons.