A thermostat - controlled refrigerated compartment takes
place in between rear facing seats, featuring 25 litre capacity for your refreshment needs.
Not exact matches
The parking brake is located
between rear wheels and will lock both of the wheels
in place, I feel this is not much friendly to use but on the safety side this is very useful.
The parking brake is located
between rear wheels and will lock both of the wheels
in place.
Where needed the batteries reside
in the transmission tunnel, under the
rear seat, and
in place of the fuel tank, and buyers can choose
between batteries optimized for range or sport.
In place of the traditional neck - wrenching monitor mounted on the roof
between the front seats, two eight - inch monitors are
placed on the
rear of the front seatbacks.
In its place is a painted cover with vents which, although plainer, lends a tougher, more coherent look to the rear aspect, especially in conjunction with twin buttresses which rise to flattened points just above the seats» head restraints and provide roll - over protection as well as helping to manage the airflow over the cabin with the roof down — further tailored by a little glass window between them that can be raised and lowered to suit and has an «optimum» default positio
In its
place is a painted cover with vents which, although plainer, lends a tougher, more coherent look to the
rear aspect, especially
in conjunction with twin buttresses which rise to flattened points just above the seats» head restraints and provide roll - over protection as well as helping to manage the airflow over the cabin with the roof down — further tailored by a little glass window between them that can be raised and lowered to suit and has an «optimum» default positio
in conjunction with twin buttresses which rise to flattened points just above the seats» head restraints and provide roll - over protection as well as helping to manage the airflow over the cabin with the roof down — further tailored by a little glass window
between them that can be raised and lowered to suit and has an «optimum» default position.
Although the term «mid-engine» can mean the engine is
placed anywhere
in the car such that the centre of gravity of the engine lies
between the front and
rear axles, it is usually used for sports cars and racing cars where the engine is behind the passenger compartment.
In dedicated sports cars, a weight distribution of about 50 % front and
rear is frequently pursued, to optimise the vehicle's driving dynamics — a target that is typically only achievable by
placing the engine somewhere
between the front and
rear axles.
• The steel front - of - dash panel is sandwiched
between two damping mats • Nylon baffles are used
in various hollow portions of the body structure and filled with sound - absorbing foam that expands when the body enters the paint oven • The headliner comprises five layers of thermal fiber acoustic material, including a premium woven fabric on the visible outer layer • Patches of sound - damping material are applied strategically throughout the body structure and melt into
place when the body passes through the paint oven, allowing the patches to follow the contours of the sheet metal below • Sound insulation material
between rear - body structural components that is made from recycled denim • Triple - sealed doors that feature fiberglass «blankets» serve as water, airflow and noise barriers.
Black was used
in places such as the area around the
rear window — a fact that every boy
between the ages of 7 and 70 knew
in the late 1970s.
The best
place for the carrier is on the floor
in between the front passenger seat and
rear seats.
So it does not come as a surprise that renders of the highly anticipated iPhone installment show two
rear lenses arranged
in a way that one is on top of the other with the LED flash
placed in -
between them.
Because Apple is expected to fit the iPhone 8 with a dual
rear - camera, it therefore has to be
placed vertically, with a flash
in between both sensors.