It's a similar design choice to the Samsung Galaxy Alpha and Note 4, with the rear retaining a removable
plastic back plate.
Unlike many new handsets, the insides of the Harrier are accessible once you remove
the plastic back plate.
The lip is where you'll find the small fingernail slot that lets you prise away the removable
plastic back plate.
But flip the watch over to the back, and you'll notice something a lot more like the Q Founder Android Wear watch —
a plastic back plate.
Asus has kept down the cost of the ZenWatch 2 by smartly cutting some corners compared to its predecessor, such as foregoing an all - metal design in favour of
a plastic back plate and omitting sensors like GPS and a heart - rate monitor.
It has
a plastic back plate, crown / power button on the right, and microphone on left for «OK Google» voice commands.
On the other hand is the Nexus 5X with its soft touch
plastic back plate that has been retained from the Nexus 5.
Not exact matches
It's just a juke joint with a kitchen in the
back, serving chicken on Styrofoam
plates and sweet tea in
plastic cups.
Put the dough
back on the floured
plate and completely cover with
plastic wrap (no edges exposed to air).
This outstanding highchair is made from a beech wood frame, chrome -
plated steel parts along with an ergonomic, durable
plastic seat shell which supports a luxurious cushion that is lavishly embroidered and attached on the
back with an iconic flower screw.
Made from high - grade ABS
plastic, and then
plated with chrome, this showerhead is
backed by an amazing 15 - year warranty, which speaks volumes about the quality of the product.
We'll let you decide how the «acid green» (Porsche's term; it's sort of a sickly lime) brake calipers look, but they do at least match the acid - green
backing on emblems inside, outside, and even under the hood of the car, a lone highlight on a big black
plate of
plastic.
The V60 Cross Country is exactly what it sounds like; an all - wheel drive version of the V60 with some extra off - road bits in the form of skid
plates front and
back,
plastic cladding for the wheelarches, and a ride height that's been raised by 2.6 inches.
LICENSE
PLATE BRACKET, PLASTIC, SOLD INDIVIDUALLY — A high quality, direct fit OE replacement license plate bracket; Backed by 1 - year, unlimited - mileage warr
PLATE BRACKET,
PLASTIC, SOLD INDIVIDUALLY — A high quality, direct fit OE replacement license
plate bracket; Backed by 1 - year, unlimited - mileage warr
plate bracket;
Backed by 1 - year, unlimited - mileage warranty.
It's a bit tougher than the regular estate, with some off - roading addenda such as black
plastic cladding and skid
plates at the front and
back, but the understated style of the regular Passat Estate remains.
Instead it is just written on the
back plastic plate by the camera and flash.
The
back plate BENDS with the slightest of touches... Yeah, i'm sure s ** te
plastic is better than the aluminium body of the ipad.
The device is sturdily built, with a metallic
back plate and a
plastic band around its perimeter.
The screen surround and two
plates on the Archos 101's
back are made of brushed metal, while the rest is
plastic.
The
back is the removable
plastic plate that has become a Samsung hallmark.
The
back might only be a
plastic clip - on
plate, but we don't mind that.
The Arnova's body is constructed of two main
plastic plates — one for the front and another for the
back.
Both of the new Transformer tablets have a
plastic strip on the otherwise all - aluminum
back plate for improved Wi - Fi and GPS reception.
The handful of
plastic cutaways in the body, for the left and right edges, the microSD slot and the dock port eat away at the tablet's sense of style, as does the seam that joins the
back and front body
plates.
The
back plate itself is shiny white
plastic; a dark gray model is also available.
That
back plate is the removable and extremely flexible
plastic type, revealing a metal - covered and non-removable 3900mAh battery, as well as slots for your SIM and Micro SDcard.
The entire
back plate is a slightly - soft panel of
plastic, which feels solid — thanks to the fact that it isn't removable — and provides just the right amount of grip without also collecting tons of fingerprints.
Both the iOS only app and a set of physical instructions walk you through installing either alarm type, and a separate mounting
plate makes the whole process easier, as you can simply focus on hanging that
plastic frame, and snap the main body of the smoke alarm into place once the
back plate is properly hung where you want it.
The aluminum front and
back plates (the device comes in black and silver, though I much prefer the silver model I tested) are joined by a matte white
plastic siding that I worry might get dirty over time, but as I've used it so far I haven't had any issues.
There's some metal to the chassis, namely the aluminum
back plate, but the rest is good old
plastic.
The XZs also comes with a metal
plate on the
back,
plastic along the sides, and glass up front.
A combination of materials has gone into the build of this device, with glass up front, an all metal
back plate, and
plastic along its sides.
The previous Moto G5 Plus model only had a
back plate that was metal, while the frame itself was
plastic.
This is a very standard all -
plastic affair, with glossy
plastic edges surrounding the screen and a slightly - textured removable
back plate that's made out of stiff and very thin
plastic.
But with the curved
back (and the
plastic mid-plate the comes down from the camera lens to the Motorola dimple) you also get access to Moto Maker, which means, along with swappable
back plates, users can now bring customization to the next level.
The removable
back plate is made of the textured
plastic that Samsung introduced on the Note 3, which gives it great grip and a nice feel in hand.
The
back plate can be customized to use
plastic, leather, or wood, and the leather and wood options add a bit of class to an already handsome phone.
The
plastic plate modules, which Motorola calls Moto Mods, attach to the
back of the phone magnetically.
The phone has a sturdy
plastic body, now featuring a thin, ribbed texture on the curved
back plate.
The front and
back plastic plates are fused together with a small, alloy frame that wraps around the circumference of the device.
Beyond the
plastic on the
back of the device is a solid metal
plate that covers the battery, a SIM card slot and a microSD card slot.
I know different people have different ways of applying the wax, but for me the best way I know how to do it is to scoop a little wax onto the
back of a
plastic spoon then smear it across the top of a
plastic or paper
plate.