Just like the high - end edition, this smartphone features glass at both its front and rear although
a plastic body frame is in place.
Not exact matches
A major contributor to this slender weight is the Ultima's hollow space -
frame chassis and glassfibre - reinforced
plastic body.
The car's main aluminium space
frame structure is covered in carbonfibre - reinforced
plastic body panels, to couple rigidity with low weight.
The
body is structured around the Audi Space
Frame technology used for the R8 and employs carbon - fiber - reinforced
plastic for all add - on parts, such as the roof, doors and sidewalls.
Design features include Smart's signature Tridion cell — the exposed metal
frame to which its composite
plastic body panels are attached.
Construction: steel
body frame integral (unibody) with front and rear crumple zones; galvanized steel front fenders, hood, roof, door panels, one - piece bodyside outer panel, thermal
plastic olefin (TPO) bumper fascias
For improved crashworthiness and to reduce vehicle weight MITSUBISHI Concept - RA features a new
body structure using an aluminum space
frame made from extruded aluminum sections and die - cast aluminum members, as well as engine hood, fenders and other outer panels made from high impact - resistance and easily recyclable
plastic resin.
The car is also built on an aluminum space
frame and most of its
body panels are made from recyclable
plastic resin which is impact resistant and helps keep the vehicle's weight in check.
@ccap41 @Drew Dowdell Per the web site: Sion will be made of polycarbonate
plastic body panels over an aluminum space
frame.
The atheltic coupe features a new
body structure that utilizes an aluminum space
frame made from extruded aluminum sections and die - cast aluminum components, as well as the hood, fenders and other outer panels molded from impact - resistant and easily recyclable
plastic resin.
A specifically designed
body made of carbon fibre reinforced
plastic (CFRP) and Kevlar is stretched over the
frame.
Chrysler also is experimenting with
plastics such as polyethylene terephthalate, or PET, the
plastic used in soft - drink bottles, for structural inner
body pieces such as the hood, trunk and door
frames.
The Bad; Some Rust on the
body (
frame is solid though) Rip in drivers side
plastic window.
A specially - designed aluminum space
frame is covered by light, rigid carbon - fiber reinforced
plastic (CFRP)
body panels, which save considerable weight versus a traditionally - constructed steel - based car.
Features included two permanent magnet synchronous motors at the rear axle rated 381 PS (280 kW; 376 hp) and 820 N ⋅ m (604.80 lb ⋅ ft)(total), torque vectoring, electric single - wheel anti-slip regulation, Multimaterial Space
Frame chassis with increased use of carbon - fiber - reinforced polymer over R8 GT, springs made from Fibre - reinforced
plastic, wheel hubs made of forged titanium, anti-roll bar boasts made in hybrid aluminum and carbon fiber, 19 - inch wheels with friction - optimized 225 - 35 series tires, 48.6 kWh lithium - ion battery beneath the passenger cabin as structural element, Crescendo Red Metallic
body colour, fine chrome horizontal struts on the grille, e-tron-specific LED headlamp design, diffuser at the rear, 7 - inch Multi Media Interface display, 6.7 - inch AMOLED (Active Matrix Organic Light Emitting Diode) optic rear - view mirror system, leather and Alcantara upholstery, e-sound artificial engine noise emitting from a speaker system mounted in the underbody that is audible outside the car at speeds under 60 km / h (37 mph).
The XL1 makes extensive use of carbon - fiber - reinforced
plastic for the
body panels and aluminum for the
frame structures.
The Passport and Classic have a related combination of metal
frames with
plastic backs, while the more affordable Leap is a little more ordinary when it comes to the
plastic body work.
The
plastic frame feels cheaper than that of the Galaxy Tab 7, and downright chintzy next to the Springboard's aluminum
body.
Will cars need metal
frames and
bodies or will we be able to cruise around in lightweight
plastic vehicles safe in the knowledge that we won't need all that armor to survive an accident?
Both the iOS only app and a set of physical instructions walk you through installing either alarm type, and a separate mounting plate makes the whole process easier, as you can simply focus on hanging that
plastic frame, and snap the main
body of the smoke alarm into place once the back plate is properly hung where you want it.
The Moto G5 Plus on the other hand, has a rounder
frame with thicker side bezels, a
plastic body, and a removable metal cover — all of which make the device look dated.
Although the
body is made of
plastic, the metallic
frame provides a premium feel to it.
Its metal
frame gives it a rigid feeling you simply can't achieve with
plastic, while the curved
body lets it rest comfortably in the hand.
The pictures do not contradict this and, in fact, show a device that seems to have a textured
plastic body with an aluminum
frame on the sides to make it look like it has a bezel - free display, possibly to make room for all 5.8 inches of the very large display.
Both devices have it in the looks department — the MX4 Pro has a metal
body with an LG G3 like metallic looking
plastic back and the Mi Note Pro uses glass on the top and bottom and a metal
frame to hold it all together.
The Pebble Time has a
plastic body, but a steel bezel
framing a Gorilla Glass - covered color display.
It features a polycarbonate IP52 dust - and water - resistant
plastic body with a metal
frame and Gorilla Glass 3, which protects the phone's 5 - inch HD LTPS display from bumps and scratches.
Talking about the Nokia 2, the device comes with a 6000 - series Aluminium
frame but features a
plastic body.
Body has got a metal
frame and rear side has got a leather type finishing, but made of
plastic.
The
body is a mixture of metal and
plastic works, whereas the
frame is built using metal, you see
plastic works on the removable back panel.
The device sports a metal
body built but is not entirely a metal phone; the
frame and edges are metal while the back panel is a removable
plastic.
Respct my superiors / kive the best to the company and customers: Ido collision jobs for20 years /
body work / weld / fiberglass / paint /
plastic repair / light mechanic / a.c training / icar training / cut panels / door sking replace / icartraining cut and replece rails or
frame.