Not exact matches
Eco Fabrics Ever committed to reducing the environmental impact of their manufacturing processes, each Bumbleride stroller is made with post consumer
plastic bottles blended into the
exterior of the seat fabric (rPET) along with bamboo charcoal blended into the interior, offering temperature regulation, moisture wicking and an ultra soft touch
for baby.
The device is similar to rapid prototype machines, which have been used
for about 15 years to print out three - dimensional
plastic models, but the trowels «allowed a new degree of control on the
exterior surfaces,» says Khoshnevis.
Go
for a retro look with these round circular frame that features a flash mirror lens, a metal inner frame and nose bridge with a
plastic exterior.
Weight reduction is a big part of the 2016 BMW M4 GTS coupe's performance boost, as the car extensively uses carbon fiber reinforced
plastic (CFRP) materials
for both
exterior body panels and mechanical bits like the driveshaft.
Since the body panels of most modern cars are sheet steel, a car's skin is often generically called sheet metal, although some cars use
plastic or carbon fiber
for certain
exterior panels, either to save weight or better resist parking lot dings.
The interior and
exterior are very nice, minus the cheap
plastic that Hyundai is known
for, I have yet to have any issues after 6 months of owning the vehicle.
As
for the Rav 4 is looks like they cribbedsome styling from Jeep and as with the new Cadillac XT4 I'm not crazy about the black
exterior plastic on the door bottoms, along the wheel wells and on the front and rear bumpers.
The range - topping Autobiography model features vast 20 - inch wheels that fill the arches, but if you go
for the entry - level SE model, it has 18 - inch wheels that look a little lost next to all the black
plastic trim adorning the
exterior.
The
exterior is bold, though its
plastic cladding may hint at a bit more off - roading ability than it was designed
for.
The
exterior has front and rear skid plates finished in a satin - chrome shade, foglight enclosures with satin - chrome surrounds, black
plastic cladding over the sides, a dark finish
for the roof rails and wing mirror covers and 16 - inch alloy wheels of a different pattern.
Of course interior and
exterior options will be aplenty, but thanks to standard Merino leather and M seats inside as well as a redesigned
exterior with broader front panels and bumper trim to allow
for larger intakes, a diffuser at the rear, an adjustable rear quad exhaust, aluminum hood, and carbon fiber reinforced
plastic roof, not many options will be needed.
This goes
for both the
exterior and interior, with the latter now featuring better
plastics and more of them (there is far less exposed metal in the new C1 compared to its predecessor).
The interior of the Optima isn't quite as well - conceived as the
exterior, but
for the price, the amount of
plastic and thin fabric over the optional panoramic sunroof is certainly acceptable.
Grand Cherokee also features some
exterior changes
for 1996: different, somewhat larger
plastic body cladding along the rockers and side panels; fog lamps integrated into the front fascia rather than the bumpers; a larger grille
for more air intake; and on the Limited models, the availability of 16 - inch tires.
The Prius is not without its shortcomings — some of the interior
plastic looks and feels cheap, back - seat space is a bit cramped
for large adults, and the outlandish interior and
exterior styling is too much
for some shoppers.
I like the
exterior styling except
for the excessive amounts of «chrome» or bright shiny metal /
plastic.
The rest of the
exterior is matte black carbon - fibre, save
for the «double - bubble» roof made from PolyMethyl MethAcrylate, a shatterproof
plastic.
Magnesium alloy will also be employed to create the 22» rims, with each wheel fitted with independent suspension while carbon fiber reinforced
plastic is used
for the
exterior of the vehicle.
While the
exterior of the T408 is comprised of
plastic, the internal frame is made of aluminum
for additional stability.
Its black, high - impact -
plastic exterior is virtually identical to that of the less expensive Ectaco jetBook Lite, except instead of a hump
for replaceable AA batteries, there's a small, tapered rectangular mound on the back
for housing the device's built - in rechargeable lithium battery.
Don't get me wrong, the Kobo Aura HD is a nice ebook reader that offers a lot of features and is a good buy
for many people
for several reasons, but I personally can't help but be disappointed with all of the inconsistencies in ebook formatting and what feels like a step down from earlier generations with the bulky design and slick
plastic exterior.
The design of these TVs remains fairly simple and Samsung has used
plastic for much of the
exterior.
For the Olympics, Varejão has reconfigured the work to fit the stadium; the tiles were photographed, enlarged, and printed on
plastic canvas, which will be draped across the
exterior walls.
These risks are addressed in current building code with the requirement
for air - impermeable insulation (i.e., rigid
plastic foams) on the
exterior side of the roof assembly; air - permeable (fibrous) insulation makes up the balance of the insulating value.
The snug design and hard
plastic exterior of the Orzly Carry Case make it an excellent option
for protecting your Switch, one that will easily fit in your purse or backpack.
It's packing premium materials
for a start, in contrast with the S5's
plastic exterior.
Flagship smartphones like the Samsung Galaxy S5, the Galaxy S4 and Galaxy S3 were all rumored, pre-release, to feature aluminum
exteriors, but ended up having the same polycarbonate
plastic material
for which Samsung is known.
As
for aesthetic, Acer has decided to try and disguise the
plastic material by enhancing the
exterior, giving it a brushed metal look.
The Galaxy Alpha is a premium Android handset that detours from Samsung's usual use of cheap
plastics and instead utilizes metals
for its
exterior.
The touchpad is made of glass, the sole part of the laptop's
exterior (save also
for the hinge) that isn't
plastic.
Assisted skilled workers with construction projects in all phases of rough and finish carpentry.Applied paint to unfinished edges of
plastic panels using a hand roller.Cut materials to specified sizes
for installation using power saws and tile cutters.Painted walls,
exteriors and interiors of buildings and furniture using brushes, rollers and spray guns.
Tier 1 Automotive supplier of
plastic and SMC
exterior body panels
for Freightliner, GM, and Ford.