This booster seat is only designed to keep your kid in the proper
position in the seat belt.
Small touchscreens are
positioned in the seat belts to control climate and infotainment functions.
Not exact matches
All children whose weight or height exceeds the forward - facing limit for their car
seat should use a
belt -
positioning booster
seat until the vehicle
seat belt fits properly, typically when they have reached 4 feet 9 inches
in height and are 8 through 12 years of age.
It just didn't feel right, my body would have never naturally chosen to be
in that
position seated with a
belt diagonally over my tummy.
In order to provide maximum protection and safety for your toddler, this travel system is furnished with open - loop guides for correct vehicle belt positioning while you're using it in the backless belt positioning booster seat mod
In order to provide maximum protection and safety for your toddler, this travel system is furnished with open - loop guides for correct vehicle
belt positioning while you're using it
in the backless belt positioning booster seat mod
in the backless
belt positioning booster
seat mode.
This 3 -
in - 1 car
seat is specially designed to convert the
position using a front - facing, high back, or backless
belt booster.
The Graco Nautilus 65 3 -
in - 1 is a car
seat that converts a front - facing harnessed booster to a high back and backless
belt positioning booster.
Those safety
belts help keep baby safely
positioned in the
seat.
Rather than boost the child up to where the
seat belt rests
in the right spots on their body, the mifold pulls the
seat belt down to the correct
position.
When the
seat is installed
in the forward facing
position and secured to the car using the lap
belt without also using the top tether, the
seat may not adequately protect the child from injury
in the event of a crash.
While some children might be the right size, age and maturity for a
belt -
positioning booster
seat, the National Highway Traffic Safety Administration (NHTSA) recommends riding
in a 5 - point harness as long as possible and, therefore, a Combination / Harness -2-Booster
seat might be a better option.
Additional safety features include
belt guides that correctly
position the shoulder and lap
belts across my child and a rigid LATCH that makes it easy and foolproof to correctly install the
seat in my car.
The Evenflo AMP Highback 2 -
in - 1
Belt -
Positioning Booster Car
Seat is designed with an elevated seat, six height settings, and upper belt guides to make sure your car's seat belt is positioned correctly across your child's chest and l
Seat is designed with an elevated
seat, six height settings, and upper belt guides to make sure your car's seat belt is positioned correctly across your child's chest and l
seat, six height settings, and upper
belt guides to make sure your car's
seat belt is positioned correctly across your child's chest and l
seat belt is
positioned correctly across your child's chest and legs.
The Carrier One has ergonomic leg
position for with a wide
seat area for the baby, and extra padding
in the shoulder straps as well as good stability
in the waist
belt, making it easy to tote the baby around on you for hours, without feeling any strain or pain!
Since the convertible
seat is used
in both rear - facing and front - facing
positions and since some parents choose not to purchase an infant
seat, only two or three
seats should be required to accommodate a child from birth until he or she is old enough to wear regular
seat belts.
The Evenflo Advanced Transtions 3 -
in - 1 Combination
Seat is a
belt -
positioning booster that coverts to a no - back booster.
This Graco junior maxi booster carseat comes with a integrated
seat belt guide
in headrest to always ensure correct
position of the
seat belt.
Keep your child who has outgrown his forward - facing car
seat in a
belt -
positioning booster
seat until they are big enough to fit
in regular
seat belts.
It is recommended by the AAP (American Academic of Pediatrics) that your child should ride
in a
belt -
positioning booster
seat if it is less than 4 ft. 9 - inch tall.
Its
seat has a restraint system consisting of a harness, safety
belt, and a crotch strap, helping
in securing the
position of sitting infant and is detachable to use frame only.
Nautilus could be a 3 -
in - 1
seat that converts from a controlled booster to a high back
belt -
positioning booster and eventually to a low - cut
belt positioning booster.
alternative options embrace a removable kid insert for smaller babies, 5 - point harness with 2 -
position chest clip, 6 -
position headrest with integrated harness adjustment, built -
in belt lock - offs for installation with vehicle
belt, machine - washable
seat pad, and insulated cup holder for use on either side of the
seat.
Children ages four to six who weigh at least 40 pounds up to at least 60 pounds must ride
in a
belt -
positioning booster car
seat.
It also advises that most children will need to ride
in a
belt -
positioning booster
seat until they have reached 4 feet 9 inches tall and are between 8 and 12 years of age.
These wings can make the
seat more comfortable for sleeping children by providing head support and keeping them
positioned upright
in the
seat belt.
Our last choice for the best high back booster
seat is a two
in one harnessed and
belt positioning high back booster
seat.
Possible flaws: For vehicles with a third row
seat, installation
in forward - facing mode could be problematic due to different
seat belt positions.
Your big kid will be protected with the
belt positioning booster as well as feel safe with the addition of a back harness that will help them stay comfortable
in their
seats.
It is safest to put the car safety
seat in a
position where you can install it tightly with either the lower anchor system or
seat belt;
in some cases, this may be on either side of the back
seat rather than the middle.
In order to be
positioned properly, the bottom portion of the
seat belt has to be
positioned between the legs.
A child who has outgrown her car safety
seat with a harness (she has reached the top weight or height allowed for her
seat, her shoulders are above the top harness slots, or her ears have reached the top of the
seat) should ride
in a
belt -
positioning booster
seat until the vehicle's
seat belt fits properly (usually when the child reaches about 4» 9»
in height and is between 8 to 12 years of age).
The open loop
belt guides place the
seat belt in the correct
position, across the shoulder and chest, and not the neck or face, and across the lap, and not the stomach.
It has a built
in guides which
positions the vehicle's
seat belts for a correct fit.
This accessory is for use with the Britax booster
seats when used
in the
belt positioning booster
seat mode.
«Based this new analysis of a decade's worth of data on children involved
in crashes, policymakers, pediatricians and health educators should continue to recommend as best practice the use of
belt -
positioning booster
seats once a child outgrows a harnessed based child restraint until he / she is at least 8 years of age,» says Dennis Durbin, MD, MSCE, co-scientific director of The Center for Injury Research and Prevention and study co-author.
8 through 15; 7 years and younger and 4» 9» or taller; children who weigh more than 40 pounds
in a
seating position where there is only a lap
belt available
They can also be converted to a
belt -
positioning booster
seat for kids between 30 - 100 pounds and 38 - 57 inches
in height.
October 23, 2009 — A study released today
in Pediatrics by The Children's Hospital of Philadelphia offers updated evidence that children ages 4 to 8 who are restrained
in the rear
seat of a car
in a
belt -
positioning booster
seat are 45 percent less likely to be injured
in a crash compared with children using a
seat belt alone.
Replace the softgoods on your KidFit Zip Air 2 -
in - 1
belt positioning booster car
seat.
While
seated in the booster
seat, and with the lap - shoulder
belt on, the shoulder portion of the
seat belt should be
positioned over the middle of the collarbone so that it does not touch your child's neck.
This 3 -
in - 1 convertible car
seat features a four -
position recline and conveniently converts from a rear - facing infant
seat to a forward - facing car
seat to a
belt -
positioning booster
seat.
As the baby rests happily
in a broad
seating position, dads will love using the waist
belt, back support and shoulder straps, which ensure a stable posture that isn't always easy to come by when carrying a baby.
It does not apply to any forward facing children
in a
belt positioning booster or harnessed
seats.
Also consider how long the child can remain
in the preferred five - point - harness before having to move to a
seat belt positioning booster
seat.
The
seat has plush padding throughout and
belt positioning clips which hold the
seat belt in place.
This 2 -
in - 1 Cosco
seat transitions from a forward facing five - point - harness to a
belt -
positioning booster.
First, the
seat belt be held
in the correct
position across your child's body.
The booster is merely helping
position the
belt and your child so that
in the event of a crash, the
seat belt actually does its job and won't strangle him or hurt her belly.
It will start your child
in a rear facing mode, change to a forward facing car
seat and then transition to a
belt positioning booster car
seat.
Baby - Safe is an i - Size
seat which can be used up to 15 months (and so only
in the rear - facing
position), either using its Isofix base or the
seat belt to secure it.