Sentences with phrase «pry bar»

Insert a plastic pry bar tool into the notch at the front edge of the light housing (closer to the front of the SUV).

Insert the blade of a small flathead screwdriver or the tip of a plastic pry bar tool into the notch on the inner edge of the access cover.

Bosch Automotive Service Solutions has introduced the OTC 7177 Extendable Indexing Pry Bar for heavy - duty applications in the automotive, construction, agriculture, rigging industries and more.

Be careful about going too cheap with things like pry bars, I have some I bent that I got from Northern Tool, if you are not familiar with them, they are similar to Harbor Freight on the quality scale, maybe a little bit higher.

At Our Lady of the Lake College, where I teach, piles of clothes, bleach, working gloves, and pry bars lined the halls of the liberal arts building.

That will work fine to move the flywheel / flexplate to get it started, but it's easier to turn it at the flywheel / flexplate with screwdriver / pry bar when you are removing the bolts.

A 36in pry bar, Oh YEAH!

@Nick C, it occurs to me that it's probably worth getting a worthy pry bar (or several) rather than just rely on a could - fail - at - any - time screwdriver.

Various Pry bars: AKA big screwdrivers for those who don't know the difference.

I used my mini pry bar to carefully start prying it off.

The only tool needed to access and replace light bulb is a small plastic pry bar tool or a flathead screwdriver.

The tools needed to remove the door panel include a small plastic pry bar tool, a flathead screwdriver, a 10 mm socket and a 1/4» drive ratchet.

In stop - and - frisks, officers approach, question and sometimes pat down people police say were behaving suspiciously — acting like a lookout or carrying a pry bar, for example — but weren't necessarily sought in any particular crime.

This belt also comes with sleeves for a pry bar, carpenter's square, and combination square.

This hitch is easy to install on your vehicle and trailer, Anderson says you won't even need any pry bars.

If you want to create a safe space for students to take risks, you won't get there with a pry bar.

I use a screw driver / pry bar to turn the flywheel / flexplate by the teeth.

Next, use a pry bar to push the head of the bolt back into the body of the alternator (leaving it without a gap).

It would be worth taking it to a garage that can put it on a hoist and give everything a prod with a pry bar.

Jack up the rear end of the car and grab a pry bar to see how much slop you are experiencing in the control arms.

HA, how the hell does one lose a pry bar?

It's usually a matter of loosening a couple of Bolts and using a pry bar to provide leverage at some point and then tightening the bolts that would have been loosened previously to free up the Belt.

Another good call on the pry bars.

The only tool needed to remove and change the wiper blades is a small flathead screwdriver or a plastic pry bar tool.

The tools needed to remove the tail light assembly and access the bulb sockets include a plastic pry bar tool, a 10 mm socket and a 1/4» drive ratchet.

The first one I would try is to stick something in the hole to prevent the bolt from just spinning such as a pry bar.

Using a pry bar, spread the rear spring pad from the leaf springs to make room for shim installation.

If you use a pry bar and brute strength, your inspection could be influenced by the bushings in the control arms.

The only tool needed to access and change the battery is a small flathead screwdriver or a plastic pry bar tool.

Use a plastic pry bar tool to gently pry off the sail panel located at the top inner corner of the door panel.

Insert the plastic pry bar tool in between the bottom edge of the door panel and the metal door frame.

The only tool needed to access and replace the bulbs is a small flathead screwdriver or a plastic pry bar tool.

Gently pry out the pop rivet friction fastener at the front top corner of the plastic door panel with a pry bar tool or a flathead screwdriver.

Pry out the center of the fastener with the plastic pry bar tool and then remove the base of the fastener.

The only tool you might need is to access the front turn signal light bulb on the passenger side is a small flathead screwdriver or a plastic pry bar tool to remove the wiper fluid filler tube.

You really just need some plastic pry bars and small screw drivers

Aligned and fitted parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.

Alternatively to all of the above, gather some fit friends, provide hammers, mallets and pry bars and let them do the demo for pizza and beer.

There was a 5» x5 ′ area of tile inside the front door that hubby knocked out by hand with a hammer and a «sonofab!tch» (what we call a pry bar).

I had asked him for a pry bar and next think I know he had two boards off.

To remove the boards from the pallet I used a pry bar.

I gently made my way around the edges of the trim working my pry bar under it and gently lifting to see it if would come loose.

Insert your pry bar into the gap between the door jamb and the wall.

I do wonder though if after you removed the laminate if you could take something a little jagged — like a pry bar and «rough up» the edges.

Removing the laminate with the pry bar is also great therapy!