A new high - pressure injection system and continuously - controlled variable oil pump
reduce friction losses in the engine, with the lower powered 110 ps version available across both the standard cee'd and new GT Line range.
An innovative low - friction oil and optimized piston rings also
reduce friction losses.
Measures to
reduce friction losses and thus improve engine efficiency include the adoption of narrow, lightweight roller rocker arms and low - friction timing chains, while D - 4S direct fuel injection helps create optimum combustion conditions, contributing to enhanced fuel economy.
Several measures have been adopted to
reduce friction losses within various parts of the engine, enhancing fuel economy.
AWD Disconnect systems respond to driver inputs and road conditions to seamlessly switch between AWD and two - wheel drive modes, actively disconnecting components such as the propshaft and rear axle to
reduce friction losses and improve fuel consumption.
Measures to
reduce friction losses and thus help enhance engine efficiency include the adoption of narrow, lightweight roller rocker arms and low - friction timing chains, while D - 4S direct fuel injection helps create optimum combustion conditions, contributing to enhanced fuel efficiency.
Unlike conventional systems, this physically, rather than electronically, decouples the rear - axle to
reduce friction losses but can reengage drive almost instantaneously.
In all modes, the Golf
reduces friction losses by decoupling the motor from the one - speed transmission and «sailing» whenever you lift off the pedal.
To
reduce friction loss in the engine, pistons in the 1.8 litre engine have a molybdenum treatment applied in a polka - dot pattern.
Only two clutches are open at a time in each gear, thus
reducing friction losses to a minimum under all conditions and in every situation.
I should correct one thing: the increased low - end torque from the turbo / DI combination also allows more driving to be done without downshifting, which downspeeds the engine and
reduces friction losses.
It also detects when all - wheel - drive is not required, such as on a dry, clear motorway, and reverts to front - wheel - drive to
reduce friction loss and save fuel.
Not exact matches
«Discount brokers and no - commission ETF trades have really
reduced the
friction for harvesting
losses, which generally is a good thing, but it also means people are trying to harvest smaller
losses and risking higher short - term capital gains,» Kitces said.
He says he is then able to go back and ask students to investigate how they can
reduce friction and heat
loss, modifying the experiment to yield greater efficiencies.
Specifically, a 9000 - rpm redline giving 562 horsepower from 4.5 - liters of flat - crank V - 8,
reduced internal
friction and windage
losses, more elaborate induction tuning.
Although this smaller - displacement turbo four - cylinder has lower internal
friction and
reduced pumping
loss than a Skyactiv V - 6 would, fuel efficiency drops when the engine is under high load, as the engine runs richer to help keep the cylinders cooler.
Internal
friction losses have been
reduced to a minimum and innovative technologies have been employed (such as the multi-spark ignition function which implements three successive sparks of different intensity and duration) to
reduce fuel consumption by 30 per cent compared to the 599 GTB Fiorano depsite the increase in power and torque.
In the manual transmission - equipped 86, this engine
reduces friction and pumping
loss, helping to provide an optimized power curve.
The low -
friction design of the brake calipers
reduces energy
losses when the brakes are not in use, directly improving fuel efficiency.
All of the advantages of a
reduced number of cylinders — primarily
reduced weight and
friction power
loss - are being exploited as well.
Friction material grooves, which break up the fluid flow between the friction and separator plates and help pump fluid through the plates, have been optimized to reduce overall clutch drag
Friction material grooves, which break up the fluid flow between the
friction and separator plates and help pump fluid through the plates, have been optimized to reduce overall clutch drag
friction and separator plates and help pump fluid through the plates, have been optimized to
reduce overall clutch drag
losses.
Toyota engineers eliminated the accessory drive belts, thereby
reducing losses from
friction.
The advantages of downsizing include improved efficiency through
reduced internal
friction, lower pumping
losses, and lighter weight — which also makes the engine warm up more quickly.
«
Reducing losses caused by
friction, aerodynamic drag, and rolling resistance improves overall efficiency,» explained Wesoloski.
Lowering cruising RPM with
reduced pumping
losses and
friction while increasing power per stroke is the easiest way to improve highway MPG.
Other innovations have
reduced intake / exhaust system
losses and valvetrain
friction, contributing to improved engine performance.
Friction -
reducing design features, including all - new ultra-low viscosity transmission fluid, internal thermal bypass, minimal number of non-applied clutches and other lower mechanical spin
losses, contribute to the 10 - speed's effect on improved vehicle efficiency.
High efficiency is achieved with new engine technologies such as multi-hole injectors, cavity pistons, dual sequential - valve timing (S - VT) and
reduced friction and pumping
losses.
[75] A lighter, more free - flowing oil (0W - 20) is also used,
reducing friction energy
loss and oil pump power requirements.
Examples: Ford claims 40 percent of the Coyote's internal
friction comes from its piston rings, so considerable time was spent developing a low - tension ring package to
reduce frictional
losses.
At the same time, a decoupling device within the rear differential opens to
reduce friction and associated drag
losses.
According to the Honda Accord's Chief Engineer, Koji Ninomiya, the key advantage of Honda's two - motor approach over the power - split design is its simpler gearing which can
reduce internal transmission
friction losses by as much as 50 percent.
The low -
friction design of the brake calipers
reduces energy
losses when the
A combination of these with other technologies, including materials substitution,
reduced aerodynamic drag,
reduced rolling resistance,
reduced engine
friction and pumping
losses, has the potential to approximately double the fuel economy of «new» light - duty vehicles by 2030, thereby roughly halving carbon emissions per vehicle mile travelled (note that this is only for a new car and not the fleet average)(medium agreement, medium evidence)[5.3.1].
Centrifugal force stabilizes the flow, thereby
reducing turbulence and
friction losses.
Thinning or
loss of ice shelves
reduces friction, allows faster flow of the non-floating ice feeding the shelves, and thus contributes to sea - level rise.
Make sure that your car tyres have the right air pressure because overinflating tyres
reduces the area of contact with the road, resulting in
loss of rolling
friction on wet surfaces.