Sentences with phrase «remove back panel»

we couldn't remove the back panel so instead we removed the glass shelves to clear space for installing the contact paper from the front

The first step was to remove the back panel and staples to get the mirror off carefully.

The only inconvenience is that you have to remove the back panel with small screws to access the battery pack.

Now, remove the back panel and insert the SIM into their respective slots as per the given directions on the panel.

Remove the back panel and you can see the dual SIM slots along with the microSD card slot and the SIM's has to be inserted as per the directions.

On the bottom left corner, there is a speaker grill give, underneath that you can find the loud speaker when you remove the back panel.

Remove the back panel and you get access to the removable 2,600 mAh battery, two SIM slots, and a microSD slot.

First you need to turn off the device, then, remove the back panel carefully.

To insert a SIM card on your device, remove the back panel and place the SIM card on to their respective ports as per the marked directions and power on your device.

First you need to turn off your device, then, remove the back panel.

To insert an SIM on your device, Switch off the device, remove the back panel.

To insert a SIM Card on your device, power off your device and remove the back panel.

To insert a SIM in Infocus M550, You need to switch off the device, remove the back panel and remove the battery.

To insert an SIM in your device, Switch off the device and remove the back panel.

To insert an SIM card on your Zoom, power off your device and remove the back panel.

All you need to do is switch off the device, remove the back panel.

This is a dual SIM handset, remove the back panel to access the dual SIM tray, you will need to slide it out — there are two nano SIM slots and both these slots support 4G LTE.

To insert a SIM card on your device, power off the device and remove the back panel.

To insert SIM on your Yunique, switch off you device, remove the back panel.

If you have purchased the new Samsung Galaxy On5 device then to insert a SIM card, power off your device and remove the back panel.

To insert the SIM card on your Infocus Bingo 10, power off your device and remove the back panel.

To insert SIM on your J2, switch - off your device, remove the back panel and remove the battery from your device.

These work great when you have a sealed phone, but if you want the user to be able to remove the back panel quickly and easily, they just don't work: glass shatters and aluminium bends.

The only major drawback I've found so far with New 3DS is a screwdriver is required to remove its back panel in order to access the console's Micro-SD card slot, which is ridiculous, and the fact that it doesn't come with a AC adapter — one of the strangest decisions Nintendo has made in recent memory.

If you have tried all the things that can help you in resetting the device and nothing seems to be working, then you can try to remove the back panel.

If you prefer, unzip and remove the back panel and it is transformed into an airy «floating» sun canopy.

Then I, um, saw the diagram on the back sticker with an illustration on how to hold the BlackBerry Torch when removing the back panel.

The removed back panel is somewhat embedded in metal as well in its plastic nature, covering specifics; two SIM slots, microSD card slot, and battery.

Removing the back panel gives you access to the dual - SIM card slot, microSD card slot, and non-removable 4000mAh battery.

I have to say, it is a bit tricky removing these back panels.

Not exact matches

Continue to remove screws and panels around the printer in order to free the casing, don't forget the screws on the back of the printer!

Rather than change its recipes, KIND removed the term «healthy» from the back panel of its packages and from portions of its website.

According to Simple Wishes size chart, I needed a smaller size even with my large cup size but I just couldn't get it to fit properly so I ended up getting a larger size and then adjusting down by removing the extra zipper panel in the middle and velcroing the back in its smallest setting.

Most booster seats with back panels can be removed as the child grows.

Remove the screws around the perimeter of the panel (front, back and bottom).

Since 2008 doing approx 1000 miles per year, I put it through an mot on the 10th January, it passed without advisories;; The underneath is very solid indeed and doesn't need any work, the current paint was done approx 7 years ago to a good standard but is not perfect, when it had a change from Albert Blue (traces of it around the battery boxes) to the current black;; It still has the US import sticker on the left side door post, the original chassis plate and the chassis stamp on the bulkhead are all there;; It drives very well, I've driven it for circa 40 miles with no problems;; It has 15» Fuchs alloys and the spare is a chrome steel wheel;; The rear end has been «modernised» at some point, I personally would remove the rear Porsche reflector and fit an original panel and bumper stops to get it back to the original pre impact bumper look, I could do this for you if required, cost circa GBP 800;; The seats have been changed to 80's leather recaros and the door cards to a later style, again I'd put some period seats in and back date the door cards if required at cost price;; The 80's recaros are worth good money so shouldn't be too much further expense if they were sold separately;; Further information to come but please contact me if you have any queries;; In summary, a really good looking classic 911Targa, that is great value and can be enjoyed as is, or improved for not a lot of money;;

«Whether removing one of the Freedom Top panels or flipping back the Sunrider soft top, the all - new 2007 Jeep Wrangler Unlimited provides owners the flexibility to conveniently experience open - air driving in less than 30 seconds,» said Donoughe.

It's simply a wagon, as if that removes the stigma of those giant station wagons of yore with wood paneling and rear - facing seats in the back.

Finally fed up with the excuses, Hill finally just asked to have her car back, but even to do that, Lambert asked for more money and she eventually paid him another $ 500 just to get it back in worse condition than when he started — with the door handles, door panels, tail lights, and seats removed.

24k miles on built 6.0 LS1 w / LS3 heads Headers Dual Electric Fans 445HP at the crank 345HP RWHP (at the wheels) Cold AC MagnaFlow 3» Cat Back Exhaust Transmission Hughs Transmission Built 4L60 Trans Cooler U-Joints replaced when installed Baer Brakes 6S 6 - Piston Monoblock Calipoers, 15» Front Extreme + Brake System Drilled & Slotted Rotors 2 Piston AlumaSport Brake System, 15» drilled & Slotted Rotors Wheels / Tires 22» BonSpeed Royal 305/45 R22 Toyo Proxes About 1 yr old and 8900 Miles on them Suspension Edelbrock Shocks Rebuilt Steering Box / Transfercase Front suspension rebuilt from top to bottom Interior Dash is perfect no cracks or fade Clean leather no rips or tears (see pics) Carpet clean no holes (see pics) Custom Door Panels (see pics) All interior lights have been updated to LED (Factory Locations) Audio Custom dash bezel integrating the JVC double din w / Navigation / CD & DVD Diamond Audio 6.5» HEX Components (4 pair total / 2 pair per door) Powered by 2 Diamond Audio 600.2 amplifiers Diamond Audio 12» Subwoofers (Qty 2) Custom integrated enclosures match the interior Powered by 2 Diamond Audio 1800.1 amplifiers Rockford 360 Signal Processor Rockford Accessories Wiring Headrest Monitors Paint Clean black paint no fading, dings or dents... Freshly painted front bumper to remove stone chips from freeway driving 4 to 5 stone chips on the hood they have been touched up.

The panel is clear and good quality the back has an extra panel which you can remove and replace with a new color or texture.

Take care when removing the rear panel as there is still a ribbon cable connected from the front to the back at this point.

Once the back panel is safely removed, you have to unplug the battery's connector from the socket.

Fuhu says this back panel can be removed to allow for easy component replacement, so that Mom and Dad can get new parts in the mail instead of having to send their child's Nabi away for repair.

Instead of having a little tab that you lift to yank off the back panel (or having to push down and slide it, which can often prove to be a bit frustrating), there is a very subtle divot on the left side of the BlackBerry Curve 9370's frame that you can stick your fingernail under and just pull up gently to remove it.

We had her back x-rayed, we did a geriatric blood panel to determine her general state of health (good except she has a slight heart murmur that is not slowing her down at all, but may require medication in the future) and we had her plaque - covered teeth cleaned and two rotten teeth removed at a cost of $ 563.00.

Bill McKibben, author, activist and founder of 350.org, has been on a tour of the East Coast to promote his latest project, PutSolarOnIt, an effort to get the White House to put Jimmy Carter's solar panels back on the roof after Ronald Reagan had them removed.

After removing the two Pentalobe screws on the bottom of the phone, you slide up and lift off the back panel.

After removing the front panel, you can see that the back of the panel is affixed to a white plastic mold that fits like a glove into the hard drive container.

Even the side panels themselves are a bit difficult to put back on after you've removed them.