Then you have to
replace fuel injectors with more efficient ones, buy Vitara pistons or forged pistons, H - beam rods and ARP head studs.
Did
you replace the fuel injectors with new units or reconditioned ones?
The next thing I want to try is
replacing the fuel injectors.
Not exact matches
If it seems low, try
replacing the
fuel filter and inspect the
fuel injectors to make sure they aren't leaking or clogged.
If diesel does get to the engine you'll need to drain the
fuel system and clean, possibly
replace the
injectors.
Every part that
fuel touches gets
replaced, from
fuel take to
fuel injector!
If there are metal shavings isn't it a given that you have to
replace more (like
fuel injectors)?
- The
Fuel injector on this cylinder was bad and
replaced.
This is a great video that will teach you everything you need to know about
replacing a bad intake manifold, or
fuel injector.
The exhaust was
replaced with a stainless steel version (as opposed to mild steel), and a full engine flush was preformed - cleaning the
injectors, pistons,
fuel line, etc..
I ran
injector cleaner through system and
replaced fuel filter.
strut rusted apart - destroyed tire (
replaced tire and strut), rear brake lines were gone, strut links, ball joint, IAC valve, catalytic converter leaks, subframe bushings, starter, MAP sensor, lights are worst design EVER - broken because of dainty connectors, cassette player doesn't work, window wiper arm screwy, gas gauge doesn't work,
fuel injector rings, spark plug tube rings, rack and pinion bushings (worst design)
Clean the
injectors and / or throttle bodies, and clean or
replace the
fuel filter.
• A580 transmission with Auto Stick and four - bolt flange • Hag 215 axle (3.06 ratio) with four - bolt flange • Modified air cleaner / induction system •
Injector covers
replace engine cover (pia) • Prop shaft with four - bolt flanges • «Hemi Orange» block treatment • Revised clean air duct • Modified air cleaner box CHASSIS • New wheel / tire assembly (three - season, non-directional); 20 - inch front wheels and 245 / 45/20 tires (forged); 20 - inch rear wheels and 255 / 45/20 tires (forged) • Lower ride height (with spring length) • Brakes (new rotors, red calipers, and hoses) • Exhaust system with 3.5 - inch tips and revised tuning • TIRE FIT system (sealant and compressor) • ESP — unique calibration and three - position switching • Cooling module (42 mm core) and radiator hoses • Revised damper tuning and spring rates • Increased output
fuel pump • Modified front and rear suspension knuckles • MK 25E ABS system (July 2005 implementation) ELECTRICAL SYSTEMS • Unique engine controller (NGC LEO) calibration • Unique transmission calibration • Custom cluster graphics (180 mph and 300 kph)
You will have to
replace the valves with lightweight ones, purchase Monkey Wrench Racing valve springs, enlarge the oil pan, Walbro 255 lph
fuel pump, and 700 cc
fuel injectors.
They tell me that its a «known problem with the Bosch
injectors and Ram will allow one
injector to be
replaced under warranty... maybe you got bad
fuel» Well if it was a one time problem maybe but its not.
Action Need To Fix It: Chrysler will notify owners and dealers will
replace the engine
fuel rail
injector crossover hose, free of charge.
I lost the transmission at 80k miles, had all the
fuel injectors replaced when two failed.
In February 1994, the 1994 model year was given a new larger chrome - plated grille and door handles, a lowport engine (
replacing the original highport SR20DE, in which the intake plenum is below the
fuel injectors and
fuel rail), a change in the vehicle's self - diagnostic system to OBD - II, and larger 195 / 65R14 tires.
New parts on the truck include: - new transmission -
injectors replaced a little over 2,000 miles ago - glow plugs - gaskets - new icp sensor - New O rings - new high perfermorance
fuel sendi
The related TSB lists
replacing all four
fuel injectors and reprogramming the PCM as a solution.
If everything is alright, clean
injectors and
replace the
fuel filter.
Brawny multibarrel carburetors have been
replaced by electronically controlled
fuel injectors.
Repaired,
replaced, and adjusted defective
fuel injectors, carburetor parts, and gasoline filters