I think I got it - so do you see
the right side of your fabric from outside, too?
Now you'll need to flip it out so
the right side of the fabric is facing out.
I did do the stitch about 3:2, with the larger stitch on
the right side of the fabric.
Starting on
the right side of the fabric, I inserted the needle through the previously marked spots, pulling the tail through to the back side.
Thread unlooped ends through needle; at grid mark on
right side of fabric, push needle through to wrong side.
Stop around a cm (3/8 inch) before the point, this ensures a smoother finish on
the right side of the fabric after sewing.
The advantage of slip basting first, is that we can baste the seams together from
the right side of the fabric, thus ensuring everything was perfectly lined up.
Darts are stitched on
the right side of fabric.
I think I got it - so do you see
the right side of your fabric from outside, too?
Once you have your silk separated, wrap this silk around your egg with
the right side of the fabric against the egg pulling tight so that it can be as smooth as possible on the egg for the transfer.
Place the right side of your zipper against
the right side of your fabric at one end of the fabric.
Knitting garter stitch flat means you can knit every stitch of every row, but things are different when working in the round because you're working
the right side of the fabric every round.
This makes a horizontal bar on
the right side of the fabric, which adds an interesting texture to an otherwise basic rib.
You face the fabric inside, so
the right side of the fabric faces each other.
Yes, sew the two long sides together with
the right sides of the fabric together.
Both
right sides of the fabric should now meet.
Once you've cut out the bag, you need to put
the RIGHT sides of the fabric together and stitch the sides and the bottom together — making sure to start your stitching 1 ″ down from the top (this becomes important later).
Then fold the waistband in half (with
right sides of the fabric together) and sew the short raw edges together to also form a loop.
Then you'll fold your fabric in half with
the right sides of the fabric touching, and the wrong side on top.
Not exact matches
Fold
fabric right sides together (the short way), and stitch a seam 1/2» from the edge
of each
side.
Stack and pin all body pieces together, making sure you have the
right side of your outer fashion
fabric facing the
right side of your inner
fabric.
Next, pin your drawn on pocket piece onto the
right side of your lining
fabric.
Making your own bias tape, knowing
right side from wrong
side of ribbing
fabric and so much more... and you end up with a great towel bib that doesn't need to go over the baby's head.
Working with the
fabric folded and the
right sides together, mark both
sides of the
fabric with a dot 10 1/2» and 11 1/2» from the folded edge on each edge.
Fold strip
of fabric lengthwise,
right sides together, and sew with a 1/4» seam allowance, as shown in the photo.
Lay one piece
of the
fabric on the floor with the hemmed
side facing down,
right side up.
Lay the second piece
of fabric directly on top
of the first piece, also with the hemmed
side facing down,
right side facing up.
The number
of layers used is identified as such: 4X8X4 (the first and last number tells you how many layers
of fabric there are on the
right and left
sides of the diaper and the middle number tells you how many layers
of fabric are in the middle).
Crucially, this double layer doesn't sit
right in the middle
of the
fabric, but closer to one
side than the other.
Flip the pattern over and pin it, wrong
side up, to a single thickness
of the
right side of your backing
fabric.
Lay your pattern down face - up on the
right side of a single thickness
of your front
fabric.
So far I keep making the error
of pinning my pattern on the «
right»
side of the
fabric, and I can't really cut or sew in a straight line!
Place the backing
fabric, such as batiste, on the wrong
side of the wool
fabric, and the paper pattern on the
right side.
Another option is to double up the layers
of fabric by cutting out two identical pieces for the front and back, sewing down the open edges whilst the pieces are pinned
right sides together, then flipping the bodice
right way out, then adding the straps.
Leaving the zipper closed, place it on the end
of the
fabric you want on the bottom
of the pillow,
right sides together (meaning the zipper pull should go towards the printed
side of the
fabric.)
There were areas near the bottom
right side of the sweater where the pink
fabric dye was darker than the rest
of the sweater.
Once you have the three even
sides ironed and hemmed, flip the cover
right side out so the OUTSIDE
of the
fabric is now on, well, the outside.
I ordered it brand new because it was just the
right size and style that I was looking for but the
fabric on the seat was rather boring so I had it reupholstered
right away to add a little pazzaz to this
side of the room.
Step Six (Option for pieced pattern): If you have pieced the pattern, put the
right side -LCB- the bright
side of the print -RCB-
of the
fabric together and pin.
Pale floaty
fabric is anchored on the
right side of casual with solid leather accessories, while all - black will see you
right everywhere.
The other downside
of striped jersey is that the recommended zigzag stitch shows up on the
right side in places where the thread doesn't match the
fabric.
Start by making sure to face the front
sides of the
fabric (what you will see when it sits on your couch) together so that you can turn it inside out and have the
right colors facing out.
Lay each piece
of fabric on top
of the flag pillow top,
right sides together.
Do this by having the
right side edge
of the
fabric and ruffle facing each other and sew the seam along the edge.
Then I turned the place mat over so the
right sides were together and pinned it, paying extra attention to the ends where the two pieces
of shirt
fabric were buttoned together.
And by
right side, do you mean on the printed or back
side of the
fabric?
Fuel Tank; Electric Power - Assist Steering; Gas - Pressurized Shock Absorbers; Front - Wheel Drive; Engine: 2.0 L MIVEC DOHC I - 4; Front Disc / Rear Drum Brakes w / 4 - Wheel ABS Front Vented Discs and Brake Assist; Front Anti-Roll Bar; Battery w / Run Down Protection; Multi-Link Rear Suspension w / Coil Springs; 3969 # Gvwr; Single Stainless Steel Exhaust; Electronic CVT Transmission w / OD; 5.41 Axle Ratio; Low Tire Pressure Warning; Rear Child Safety Locks; Dual Stage Driver And Passenger Seat - Mounted
Side Airbags; Curtain 1st And 2nd Row Airbags; Electronic Stability Control (ESC); Driver Knee Airbag; Airbag Occupancy Sensor; Dual Stage Driver And Passenger Front Airbags; ABS And Driveline Traction Control;
Side Impact Beams; Outboard Front Lap And Shoulder Safety Belts - inc: Rear Center 3 Point Height Adjusters and Pretensioners; Digital Signal Processor; Radio w / Clock and Speed Compensated Volume Control; Automatic Equalizer; Radio: AM / FM / CD / MP3 Audio System - inc: 140 watt 4 - speakers auxiliary input w / left and
right component plugs and steering wheel mounted audio cruise control and Bluetooth hands - free system (requires dealer installation
of V / R microphone and Bluetooth HFP system) controls; Integrated Roof Antenna; Light Tinted Glass; Rocker Panel Extensions; Black
Side Windows Trim and Black Front Windshield Trim; Steel Spare Wheel; Fixed Rear Window w / Defroster; Compact Spare Tire Mounted Inside Under Cargo; Fully Galvanized Steel Panels; Tires: P205 / 60R16 Yokohama All - Season; Body - Colored Power
Side Mirrors w / Manual Folding; Trunk Rear Cargo Access; Black Grille w / Chrome Surround; Auto Off Aero - Composite Halogen Headlamps; Body - Colored Front Bumper; Clearcoat Paint; Speed Sensitive Variable Intermittent Wipers; Body - Colored Rear Bumper; Wheels: 16 Steel w / Full Wheel Covers; Body - Colored Door Handles; HVAC - inc: Underseat Ducts; Ashtray; Engine Immobilizer; Carpet Floor Trim and Carpet Trunk Lid / Rear Cargo Door Trim; Cloth
Fabric Seating Surfaces; Front Bucket Seats - inc: 6 - way adjustable driver's seat and 4 - way adjustable front passenger seat
The stylus is too thick to fit inside the tablet itself, but Lenovo puts a
fabric loop for it on the
right side of the detachable keyboard.
Lay the decorative
fabric on top
right side down on top
of the shower curtain panel with edges aligned.
We're about 3 stories off the ground up here in our bedroom, and we've got paper covering the lower half
of our windows
right now (til the shutters arrive), so we opted not to get the (
fabric) privacy liners on the back
side of each shade... but that it an option if you need it.