Sentences with phrase «roller marks»

Chalk paint left terrible brush and roller marks when I test painted with it.

A: It is slightly textured so you will not get roller marks no matter how much of a beginner you are.

Airbrushed atmospheres, gradients, hypnotic curlicues, industrial roller marks, thin skeins of paint, paint squeezed directly out of a tube — Benson knows that each of these techniques creates a discrete physical sensation of create ocular depth and tactility that belies the flatness of the canvas.

You will want to fill up with paint again when your paint is getting low and you don't want to press heavily with the foam roller on the table because it will leave roller marks.

It will just highlight every single brush stroke, every single roll mark you do,» he adds.

On the left panel of the painting the edges of the triangles are subsumed in heavy acrylic under the «roller marks,» and the transition from the highly reflective «shimmer» to a light - absorbing matte finish is achieved in part by the addition of chalk to the paint, dulling the surface down to a finish that resembles encaustic.

Each one has been painted with white latex paint, without any trace of brush or roller marks.

In 1951 Robert Rauschenberg painted a series of stretched canvases a plain, solid white, leaving minimal brush or roller marks.

He advises homeowners use a 4 - inch - wide roller to apply the paint, and then go back over it with a brush to remove any roller marks.

I want to repaint them white but I don't want brushstrokes or roll marks.

He also says it's important to accept that a DIY painting project will have brush and roller marks, so if you know you just can't live with that, investigate the cost of hiring somebody to spray the paint on for you.

This formula goes on smooth without brush or roller marks», and man - that is the truth!

Little to no sanding required between coats for a smooth, professional looking finish with no brush or roller marks.

The first coat was applied with a brush and then the second coat, I used a roller and then used a brush to smooth out any roller marks.

As it drys the roller marks diminish.