The trick is to lightly sand the floor first with
some rough sandpaper, otherwise it will be to slick and the paper will peel right off.
It's a strange sensation,
their rough sandpaper type skin brushing against you... there were Sharks everywhere!
The barbed tongue of the feline that gives
it the rough sandpaper feel pulls the licked fur towards the back of the throat where it's swallowed.
From smooth glass to
rough sandpaper, tomorrow's haptic screens could create sensations as varied as real life.
Not exact matches
And some people complain about toilet paper being as
rough as
sandpaper.
Mornings were
rougher than coarse - grit
sandpaper.
The skin's texture — relatively smooth if stroked from head to tail but painfully
rough in the other direction — has made it suitable for applications including
sandpaper and sword grips.
They feel
rough like
sandpaper and are very small, about the size of a salt grain.
Before I painted, I sanded the entire dresser with 150 grit
sandpaper, not to completely remove all the current finish, but to
rough it up, so the paint would have some «tooth» to adhere to.
I don't remember what grit
sandpaper I used but it was just enough to
rough up the surface a bit.
Usually when I distress something, I use
sandpaper, but I wanted more of a
rough, chippy look on this centerpiece, so I tried using a scraper / putty knife this time and LOVED the results.
Hi Nancy — I would go over the surface using 100 grit
sandpaper to
rough up the surface and knock down the shiny surface first.
I would make sure to
rough up the floor well with
sandpaper first, clean off all the grit and then use light coats of paint.
Hi Alison — It never hurts to sand the surface a bit with
sandpaper on a hand sanding block just to
rough up the surface a bit.
Hi Chris — To paint over laminate with chalk paint, I would first go over the surface with 100 grit
sandpaper to
rough up the surface.
So to put it lightly, Battleship has more
rough edges than a
sandpaper Rubik's Cube, and maybe we're giving it more credit than it's due, but it's also at times so wilfully — surreally!
Ryan Reynolds brings the flippant attitude and Nicholas Cage is as
rough as
sandpaper but still has the heart of a hero.
This great actor's voice is a wonderful contradiction:
rough and smooth at once, like
sandpaper worn beyond use.
It wouldn't hurt to
rough the shoes up with some
sandpaper to breakup any glazing that may have occurred.
Start with a very
rough grit
sandpaper (perhaps 100 grit) and sand the area, working your way down to progressively finer grits.
Sandpaper is graded by a «grit number» — the lower the number, the
rougher the texture (600 - grit is very fine, 40 - grit is quite coarse).
Improper perch size, perches all of the same size (causing insufficient foot exercise),
sandpaper perches, perches that are otherwise too
rough or dirty, or simple inactivity can cause a serious foot condition in birds called pododermatitis (otherwise known as bumblefoot).
After getting rid of all the
rough spots and rust with your wire brush and
sandpaper you should clean the cage.
The coat of the Chinese Shar - Pei is rather
rough, the translation of its name literally meaning «sand - skin», and petting one feels a bit like stroking your hand across
sandpaper.
Providing perches with
rough surfaces can help reduce the frequency of nail trimming, but do not use
sandpaper perches.
Your hand rises with desire to brush against the
rough leathery skin curious to touch the grain that caresses like
sandpaper but the bladed teeth still protruding and hungry with bite even in their death keep you at spectator's distance.
It looks
rougher than
sandpaper after a night out, but lots of fun.
This
rough case is then sanded smooth, all the way up to 1000 grit
sandpaper.
The phone comes with a removable plastic back that features a
rough matte finish that feels somewhat like
sandpaper.
Hi Chris — To paint over laminate with chalk paint, I would first go over the surface with 100 grit
sandpaper to
rough up the surface.
Did you go over the surface with a piece of
sandpaper to
rough up the surface a bit?
Sand the hat with 100 grit
sandpaper to
rough up the surface a bit.
1) First, I would lightly sand out any
rough spots with a fine
sandpaper (220 grit or similar).
Usually when I distress something, I use
sandpaper, but I wanted more of a
rough, chippy look on this centerpiece, so I tried using a scraper / putty knife this time and LOVED the results.
When dry, sand with 100 grit
sandpaper to
rough up the smooth surface.
I used
sandpaper to smooth out some of the
rough areas.
I would
rough up the surface of the rubber with 220 grit
sandpaper to provide some tooth for the paint to adhere.
I
roughed up legs and table base with
sandpaper, and then painted with chalk paint.
We really scratched and gauged the top A TON using our high tech skilled DIY'er tools: a piece of
sandpaper to
rough things up, a baggie of screws and nails (just hit the baggie on the counter surface), and a screw driver and hammer to dent it.
I took those woven seats off (they were just screwed on) and then at first I just used a sheet of
sandpaper to
rough up the surface, but that didn't work so well.
STEP SIX: Use a Dremel Multi-Max equipped with the MM70W
sandpaper wood sanding sheet to smooth out any
rough edges.
Sand any
rough areas with heavier grit (lower - numbered)
sandpaper, working to fine grit.
I had my cute little design assistant daughters help me distress the chairs with
rough grit
sandpaper, and then I sealed them with Minwax Polycrillic!
If the tile is slick and shiny, I would
rough it up with 60 grit
sandpaper and then clean it well.
You don't need to take the finish to the bare wood, but use a hand block sander to
rough up the surface with 100 grit
sandpaper.
The surface may need to be
roughed up more with
sandpaper if the original finish was glossy.
I would sand the surface with 100 grit
sandpaper on a sanding block just to
rough up the surface a bit.
I always go over every piece I paint with a sanding block with 100 grit
sandpaper on it for about 5 minutes to
rough up the surface a bit.
I use 100 - grit
sandpaper over the surface to
rough it up first with a hand - sanding block before painting.
If your dried painted finish has any grit in it or looks
rough, simply go over the area with med - fine
sandpaper to smooth, not to distress.