Sentences with phrase «rubber mallet»
A rubber mallet is a type of hammer that has a rubber head instead of a metal one. Full definition
The researchers then twisted both models, and hit them with rubber mallets.
aaas.org
The device transfers that command to a corresponding rubber mallet, which taps on the stalactite of the same note.
Use a heavy hammer (a large rubber mallet worked okay but the heavy duty hammer was the one they fought over)
If you use alloy wheels, you should also remember to carry a big rubber mallet with you, as the salt may cause the alloy wheel to stick to the hub, even if all nuts are removed.
Doctors hit us with rubber mallets to test reactions, they jab us with fingers to see if our livers hurt.
A rubber mallet can help, if you have one, to gently push the knife through difficult thick spots.
Plus, who doesn't love smashing things with a rubber mallet?
Arsenal may not be the hammer at the moment but far from just being a fancy jewellery, more like a rubber mallet, with at least 2 - 3 fine tuning could become the hammer of justice, but leave it to master Wenger in finishing his master piece, each year he seems to add a couple pieces, not to unsettle the ones he has already, this coming season would be a good time to complete the master piece
A 21 - year - old fashion writer was attacked with a rubber mallet while boarding a southbound «6» train on on the Upper East Side, police said.
He selected 37 stalactites for their pitch, sanded all but two down to perfect their tone and then attached a rubber mallet device, measuring more than a foot long, next to each stalactite.
He had a little trouble getting the large sides / back / front square and had to use a rubber mallet.
Stake the lumber into the ground using a rubber mallet or hammer, then secure each of the wreaths to the lumber using a drill and exterior screws.
Links to caning supplies (not linked are common supplies such as scissors, rags, small paintbrush, rubber mallet, drill, sandpaper, etc.):
Next he pounded it down with a rubber mallet.
The tools he used for this part were clothes pins (a substitute for caning wedges) and a rubber mallet.
Check that muffler internals have not corroded and collapsed there by blocking exhaust; just tap with a rubber mallet and listen for rattling inside.
I've removed the axle bolt and tried banging the axle with a rubber mallet for about two weeks now.
«A rubber mallet will do it, but it will make it easier for the PVC sleeve to slip off in the future.»
Don't try hitting the sleeve with a rubber mallet like we did.
Not sure what their theory is with the rubber mallet.
With that being said it really can't hurt to try the rubber mallet.
On my previous car, the winter alu wheels once were so tight due to expanding rust or aluminium oxide that removing them required a rubber mallet.
Just get some tools like pacer sets, rubber mallets, cutting tools like basic knives and a stitching and lacing pony.
They just replaced the rubber mallets with these plastic things so my game is a little off.
Instead of paint, natural seasonal and artificially dyed flowers from corner bodegas and markets in New York City were employed to mark the canvas, applied with quotidian objects — rubber mallets, dildos, bowling pins, and billiard balls — rather than paintbrushes.
This is clearly evident in several sculptures in this exhibition, including Steel Cloud (for Po Chu Yi), a reference to the Tang Dynasty poet also known as Bai Juyi, or in Titanium Landscape, which features an architectural element resembling a Chinese moon gate, or in a recent Untitled (2013) sculpture in which a small gong is suspended that can be struck with a rubber mallet, delighting the viewer with its gentle and sonorous tone.
As in, the manager is picturing you carrying a rubber mallet and wearing a balloon hat.
Seriously easy, if they don't go in easily, just pound a bit with a rubber mallet.
Once you have your measurements set and they are cut to size, put a little wood glue in the precut holes and use your rubber mallet to insert the dowels into their holes in the plywood.
The fit was tight, so we used a rubber mallet to get everything in place.
We used a rubber mallet to tap them tightly into the holes so they were flush with the back of the board.
Luckily, they came off rather easily using a rubber mallet.
Tip: If the board doesn't quite fit, use a rubber mallet to gently force it into place.
Noticing that one plate had a fairly severe stress fracture, I placed it in a cloth tote, and gently tapped on the back with a rubber mallet until it cracked.