If it still comes off, then
sand over the surface where the paint is peeling off with 220 grit sandpaper.
Not exact matches
The Crown corporation's original government funding of $ 100 - million increased
over time to $ 1 - billion, with the objective of developing technologies and processes that would get the private sector back working on the 90 per cent of the oil
sands that were too deep to be
surface mined.
A hairless ape» — Schoenberg;» A mere insect, an ant...» — Church;» An accidental twig» — Gould;» A rope stretched
over an abyss» — Nietzsche;» A fungus on the
surface of one of the minor planets» — Du Maurier;» A jest, a dream, a show, bubble, air...» — Thornbury; and» I see no reason for attributing to man a significant difference in kind from that which belongs to a grain of
sand» — Oliver Wendell Holmes.
TheKelangais a type of marshy forest formed when silt or
sand from the mountains settles in the valley
over a non-porous bed of clay; plant life roots in the peat that builds up on the
surface.
Front wheels are swivel wheels, but can be locked straight for more stability when going
over rough
surface like snow,
sand, grass etc, this is good for daily use or you can say for city walk too.
These strollers may feature bigger wheels which are easier to roll
over soft
surfaces like dirt or
sand, and shocks to soften the impact of a bumpy road.
Sometimes we have to take our strollers
over sand, snow or other soft
surfaces and it can become very difficult to push.
If you regularly roll
over bricks,
sand, gravel, or other non-paved
surfaces, start your search with something with large tires and good suspension.
* Editor's Note (4/6/17): A paragraph was added after posting to reflect the ongoing debate
over the potential risks of electrostatic
sand for
surface explorations on Titan.
The crepe sole was flatter, allowing the
surface area to be better spread
over the ever - changing
sand.
I ran
sand paper
over the entire piece just to rough up the
surface, wiped it down with water and bit of mineral spirits, then let it dry before starting.
I would go
over the area again with sandpaper on a hand
sanding block to make sure the
surface is smooth.
If the dried
surface feels gritty, the PoP was not mixed enough There is a simple fix for this, simply
sand over it with 100 grit sandpaper to smooth.
One way to get rid of the white flecks after
sanding is to wet a rag with hot water and rub
over the
surface.
Both the SUVs get all - wheel drive with intelligent driving as well as off - road modes that offer excellent grip and traction
over any
surface be it
sand, snow or mud or even bad roads for that matter.
«Mud & Trail» configures the car's systems for muddy, uneven
surfaces and «
Sand» gives greater confidence
over dunes.
As visual marking (claw marks on wooden
surfaces) also encourages a cat to replicate this behavior in the same place, the only way to prevent more scratching is to
sand and paint
over the
surface.
After a reasonable
surface interval, you
sand your buddy can use your DPVs in a search pattern
over the bottom behind the dive boat.
Here it comes in the form of a pale, 1960s Wallace Berman image of the moon's remote
surface overlaid with cryptic writing; a black - and - white Vija Celmins screen - print of the vast, horizonless ocean that appears to carry a faint «X,» as if the printing plate had been canceled; a ragged piece of fiberglass painted with a Tiepelo - like sky by Joe Goode, who seems to have ripped it from either the actual heavens above or a movie - studio set; and a photographic close - up of shifting desert
sand,
over which actual
sand and colored pigment has been applied by David Benjamin Sherry, as if reality were a veil obscuring camera - created truth in our mediated universe.
Millions of grains of colored
sand will be sprinkled carefully on a flat
surface over the course of two weeks, following precise and ancient instructions passed down
over thousands of years.
In the museum the eye acts as a surrogate for the fingers, passing
over each ripple, raw edge, or smoothly
sanded surface.
By incorporating layers of paint, collage, and then
sanding down the
surface and then starting all
over again, the artist exposes the evolution of the painting and allows the viewer access to the process.
The painting's
surface, which features dense layers of enamel, alkyd, oil paint, twine,
sand, and pebbles, had been dulled by dirt and grime that had accumulated
over the years.
All of the works, large and small, have meticulously hand - finished
surfaces, slowly built up
over time with as many as twenty layers of paint, which are then
sanded to a satin polish.
Whereas I tend to be very straight with my paintings except for the whole series of black paintings where I really repainted them
over and
over and then
sanded them down in order to make an extremely impenetrable
surface that looks kind of like Formica sometimes.
While it was still wet, he applied ash
over the
surface, then
sand and coal dust.
The sky equals about 10 meter liquid [or frozen solid]
over entire
surface - so rocks, lawns, dirt,
sand, and have little heat capacity as compare to 30 feet worth of liquid air.
Examples include a dispute between joint venturers
over the operation of a gold mine, a dispute charging an oil and gas lessee with failure to prevent drainage from an oil and gas lease, litigation
over water rights, a dispute
over title to
sand and gravel and a claim for trespass by the
surface owner against the operator of a
sand and gravel mine.
Construction Worker, Mission Renovation2015 — Present • Read blueprints and assign responsibilities to work crew accordingly • Prepare construction sites before crew comes out to make sure all hazards are removed • Measures distances to ensure remodeling and installations will fit perfectly • Erect scaffolding and other safety structures to reduce the number of workplace injuries by 80 percentConstruction Worker, Rose Falls Remodeling2013 — 2015 • Operated jackhammers to break up concrete to install pipes under the earth • Assisted masons, plasterers, and carpenters with specialty work • Cleaned
surfaces before and after material was to be applied, which included hosing water,
sand, or steam based on the material being worked on • Installed
over 60 new roofs on residential houses throughout the city
When prepping for chalk paint all that is needed is a light going
over the
surface with 100 grit sandpaper on a
sanding block.
One way to get rid of the white flecks after
sanding is to wet a rag with hot water and rub
over the
surface.
If the dried
surface feels gritty, the PoP was not mixed enough There is a simple fix for this, simply
sand over it with 100 grit sandpaper to smooth.
I would go
over the area again with sandpaper on a hand
sanding block to make sure the
surface is smooth.
Before adding the next coat, I came in with a 220 grit
sanding block and lightly went
over the
surface to eliminate any imperfections / dirt / fuzzies left behind from the roller.
No
sanding, no stripping, no primer... it paints right
over any
surface or finish.
I cleaned the
surface, did nt
sand it as it was smooth, and spray painted the pieces individually and gave it a once
over when assembled.
Sanding over the oil, with just a few quick passes, instantly transforms the paint to a silky - smooth
surface.
Once that was dry, I
sanded the top all
over to make sure it was an even
surface.
I just took a 120 grit
sanding block and lightly rubbed it
over the
surface to get the glossy sealer off.
The only caveat to be aware of when
sanding your painted
surface — is that sometimes people will
over sand - and begin polishing and burnishing their paint.
I ran
sand paper
over the entire piece just to rough up the
surface, wiped it down with water and bit of mineral spirits, then let it dry before starting.
Chalk Paint ™ can be applied
over almost all previously finished furniture
surfaces without
sanding, stripping, or priming.
If the piece has damage or chipped paint, you'll want to
sand down those areas to get a smooth
surface to paint
over.
I would still go
over the
surface with a light
sanding and clean it well, before painting
over with another color of chalk paint.
If I remember correctly, I lightly
sanded over the desk, just to rough up the
surface, but I didn't bother
sanding the old finish off.
I always go
over every piece I paint with a
sanding block with 100 grit sandpaper on it for about 5 minutes to rough up the
surface a bit.
I use 100 - grit sandpaper
over the
surface to rough it up first with a hand -
sanding block before painting.
It says you can paint
over glossy wood trim
surfaces etc. without
sanding.
Since the cabinet is made of Mdf — I would lightly
sand over the entire
surface to rough up the smooth
surface a bit.
I also
sand over the entire
surface with «fine» 220 sandpaper if needed to smooth a paint ridge or drip.