Sentences with phrase «sandpaper between»

A quick tip for your paint smoothness — a roller brush might work but to get that really smooth finish I know most furniture refinishers use a very fine grit sandpaper between coats.

To seal the top of the table I applied three coats of polycrylic (also by Minwax) and lightly sanded with 400 grit sandpaper between each coat.

Sand lightly with fine grit sandpaper between coats.

Not exact matches

The strength of the schematic representation of the communication between the areas depends on the tasks to be performed: Left, sandpaper differentiation; right, localization problem.

You can wet sand with 220 or higher wet sandpaper (its black) in between the coats of the poly to get a super smooth finish.

We'd still choose the iPhone over it most days, but the gap between Apple's phones and cheaper Android alternatives such as this is being sandpapered down to wafer thinness.

The 12 works on exhibit, created between 2003 and 2015, all adopt the same format: large, shallow, steel - framed glass boxes holding different arrangements of found objects and two - dimensional works — mostly lithographs but also paint on paper and pochoir on sandpaper.

I like to bounce back and forth between 220 and 320 grit sandpaper.

You can wet sand with 220 or higher wet sandpaper (its black) in between the coats of the poly to get a super smooth finish.

If a smoother texture is desired, finish sand between coats with a fine - grade (220 - 320) foam sanding pad or 400 - grit sandpaper to improve smoothness and adhesion.

In between coats of paint, make sure to sand the drawers and body with a fine grit sandpaper to achieve a smooth painted finish.

Just make sure you sand the top with 400 grit sandpaper (by hand) between each coat of the finish.

I let the piece dry overnight before applying several coats of General Finishes Water Based High Performance Top Coat, sanding between coats with a 320 - grit sandpaper, removing sanding dust before applying another coat and allowing 2 hours between each coat.

Also sand between coats (using fine sandpaper) and / or after the last coat for a smoother look.

I would use light coats and use fine sandpaper in between each coat to smooth out the paint.

I also sanded in between coats of topcoat with 400 grit sandpaper for a super smooth finish.

I sanded in between coats with 220 grit sandpaper.

lately I have started using a VERY high grit sandpaper to buff the stain between coats (as opposed to using steel wool) and this has given me very nice results.