Sentences with phrase «saw to cut»

I used my jig saw to cut the pieces.

You're also going to want a saw to cut the boards to the correct length.

Run all four sides of the drawer front board through the table saw to cut the board at an angle but leave the center front flat.

We also used our jig saw to cut out a few funky areas, like around the toilet pipe and around outlets.

Next, use the table saw to cut the table in half.

Next, use table saw to cut table in half.

What we do when we have to use any type of saw to cut; we use painters tape and mark it and cut through the tape.

You could use a jig saw to cut out the shape of the drawers (leaving you no seams), but that seemed impossibly picky.

I just used some scrap / salvaged wood I had in my garage, drew out the shape I wanted and use my Ryobi Jig Saw to cut them out!

For a big style statement without dropping big bucks, we used a saber saw to cut a curvaceous headboard from a piece of 5x8 - foot medium - density fiberboard (MDF), painted the edge white, then wallpapered it with a large - scale, eye - popping pattern.

Use a Porta - band saw to cut the plate to the right lengths.

2) Use a miter saw to cut sixteen 10.25 ″ dowels, sixteen 7-5/8 ″ dowels, and sixteen 5-1/8 ″ dowels.

Once that additional piece was securely attached, we used our circular saw to cut our «newly - sized rectangle» down to be the right size width-wise.

He used our miter saw to cut the trim pieces to fit around the wood sign.

We used a simple miter saw to cut them.

Then used my circular saw to cut along the line.

I'd planned on bringing a few 8 - foot lengths of 2 × 10» and 2 × 12» home and using my own saw to cut the shelves to length.

If you wanted to do this step with a more traditional crown molding, you definitely could, but you would need a miter saw to cut the angles.

Fifty - two - year - old Palm Beach Gardens resident Sam Skielnik uses a chain saw to cut down a tree that fell across the street from his house on Elm Avenue on Monday, September 11, 2017, the day after Hurricane Irma...

Fifty - two - year - old Palm Beach Gardens resident Sam Skielnik uses a chain saw to cut down a tree that fell across the street from his house on Elm Avenue on Monday, September 11, 2017, the day after Hurricane Irma... Andres Leiva / The Palm Beach Post

We (and by «we» I mean the contractor we paid to do it) built a large, rounded concrete block planter that required trenching, rebar, and a large saw to cut the blocks to fit in the corners.

He was using a power saw to cut pipe and the saw kicked back at him.

He then used a circular saw to cut her body into pieces before wrapping the pieces in cling film and plastic bags.

Efforts are also under way to reduce material costs by creating less waste, for example with kerfless wafers, which require no saw to cut a silicon wafer off a large ingot, and to extend the lifetime of the equipment.

In his more recent body of work, titled Flat Screen Nature (2012 — current), Goode uses an industrial hand saw to cut through sheets of painted fiberglass, creating allegorical landscapes of jagged edges and menacing peripheries; the artist's visual vocabulary comes full circle to represent our environment's vulnerable sky, land, and sea.

Doable, but that's like buying a kiddy chair and using a saw to cut some parts so the father can use it.

Use a chalk line and circular saw to cut the top of the posts off at the desired height, nail decorative caps over each for protection, and you're done.

I used a miter saw to cut the board into 9 ″ long pieces, then used a sander to smooth out the cut edges.

I did use a miter saw to cut the 2 × 4's myself, but beyond that, the only power tool I needed was a drill.

- Use your saw to cut out between these lines — going down through almost half of the wood ball.

I used a DeWalt Miter Saw to cut all of my wood in this project, but if that is not an option for you a good ole hack saw would work perfectly!

Most farms will lend you a hand saw to cut your pumpkin off the vines.

They basically had to use a circular saw to cut out a huge block chunk that included the skull,» said Quam to Live Science.

While the wasp is emerging, it may rub these spines against the host and use them like a saw to cut open the body.

1898 Surgeon Leonardo Gigli invented a specialized saw to cut through the skull.

This feature will allow you to get more stability as you use your powerful saw to cut through various materials.

If you use a band saw to cut metal regularly, good blades are a must to get consistent results.

It's best to use a power saw to cut a hole like this but if you don't have one, you can drill a series of holes and use a pair of wire cutters to clean out the Swiss cheesed metal.

The cooks swayed back and forth, pulling on a two - man saw to cut the big shin in half.

HAYDEN, Idaho — A man who believed he bore the «mark of the beast» used a circular saw to cut off one hand, then he cooked it in the microwave and called 911, authorities said.

... (See To cut or not to cut?)

In some missions you also have the opportunity to use hydraulic claws to prize open vehicle doors and circular saws to cut through wooden doors adding realism to the experience.

Blades are seen to cut sharper, bristles are dead drop gorgeous and the alleys and arenas seem to have drifted in the right direction.

It is also seen to cut cost for banks as high as $ 20 billion per year by 2020.

But for those of us who have one or two stereo systems hanging around the house, this setup presents one of the simplest, and most affordable ways we've seen to cut the cord on your favorite tunes.

Not exact matches

Bloomberg reported that those working with clients in the healthcare industry could see as much as 20 % extra on their paychecks, according to an Options Group report that projected the largest pay raises and cuts.

One of the last sights they see before sprinting on to the grass is a small chapel cut into the tunnel wall.

As an example, if every customer paid with credit, a small family business would see its profit reduced from $ 50,000 to $ 35,000 — and if their margins before card fees were closer to 5 %, then you are looking at cutting their profit from $ 50,000 to $ 20,000!

Ryan also began to couch his language, saying that «average households at every income level see a tax cut.»

Federal guidelines for destroying guns require the crushing, cutting, or breaking of the gun parts — typically by torch rather than saw or other tool — to prevent its future use as a firearm.