Cut out your fabric, remembering to leave seam allowances and cut (
the seam allowances along the eyelet edges need to be longer than the eyelet).
Not exact matches
After the zipper was sewn in, she sewed the facing to the top edge of the dress, folded the
seam allowance under
along the facing's zipper edge and hand stitched it in place.
The pattern has a 1/2 ″
seam allowance, but I only sew the full 1/2 ″
allowance along the inside curve of the neck so that the neck opening is roomy around the baby's neck.
Then I sewed the lining to the kimono with right sides together
along the bottom hemline and
along the center front
seams with a 1/2 ″
seam allowance.
Next, line up the bandannas right sides together and sew
along the edge using a 1/4 inch
seam allowance.
Step Nine: Starting at one end, allowing 1/2» for the
seam allowance, sew
along the outside edge of the fabric.
Step 4: Use scissors to make small slices about every inch
along the bag's
seam allowance to allow for easy turning.
Step 4: Sew
along all four outer edges, leaving a one - inch
seam allowance.
Fold piece C lengthwise in half and sew
along the long open side using a 1/2 ″
seam allowance.
Once we were happy with the placement, we then folded under the
seam allowance of the text printed panel and pinned the two edges in place, so that the dancers and «horizon line»
along the base of the border print matched.
Cut
along the pattern piece, adding about 1/2 ″ for
seam allowance.
Add a 1/4»
seam allowance to the remaining half - circle,
along the cut line.
It's so easy, you just stitch the outer pieces to the underlining with right sides together
along the vertical
seams, using a 1/4 ″
seam allowance.
Sew
along straight edge with 1/2»
seam allowances.
With right sides together, pin and machine - stitch (1 cm
seam allowance)
along a 20 cm edge.
Use 1 / 2 - inch
seam allowance for backings and press the
seams open to distribute the extra fabric fullness
along the
seam.
Tack the pleats flat inside the
seam allowances (around 1 cm from the raw edges)
along the top and bottom.
Using a 1/4 ″
seam allowance, sew the pieces together
along the side
seam starting at the top.
Using 1⁄4»
seam allowance, sew
along two edges as shown (Diagram 2).