Sentences with phrase «second coat of paint»

I did second coat of paint on the main wood floor on my way out.

We spent the better part of last night sanding 70 linear feet of trim and slapping on a second coat of paint and — just like that — it was done.

I added a second coat of paint.

Apply a second coat of paint.

After caulking the seams of the baseboard trim and applying a second coat of paint, we knew we needed to address the countertop.

When I applied a second coat of paint the next day, the first coat began peeling off as I was applying the second coat.

My trick also is to paint the first coat with a brush then the second coat of paint with a sponge roller.

For the second coat of paint, I focused on the top third of the dresser, applying an even coat of paint to cover the entire surface section.

When using the bonding agent you should allow it to dry for at least a minimum of 2 hours before applying a second coat of paint.

Once dry to the touch, give them a second coat of paint.

Do you dilute the second coat of paint as well, and do you spray again before you paint another coat?

Once the second coat of paint dried, I wanted to add a fun design to the tray.

Then add a second coat of paint with the dabber.

I did not use bonding agent in either coat of paint on my piece because I was starting with previously unfinished raw wood, but the wax puck really helped to create some resist with the second coat of paint.

Then when it's dry, continue with your second coat of paint.

As you start to apply your second coat of paint you -LSB-...]

When I was applying the second coat of paint on top of the now - dry first coat, I broke out the magic solution.

In between the first and second coat of paint I sanded with 320 grit sand paper.

Just make sure your first paint color is completely dry before adding the Vaseline and second coat of paint.

When I started putting on a second coat of paint some of the first coat pealed off.

In addition to making the work glossier, the second coat of paint slightly compressed some of the raised curls of paper on the work's left side.

If you can still see the wood, you'll want to give it a second coat of paint.

After the second coat of paint was dried I applied a white wash technique.

Do you dilute the second coat of paint as well, and do you spray again before you paint another coat?

I did the first coat that afternoon and then at night, after all the kids were in bed, I did the second coat of paint.

It almost didn't need a second coat of paint!

Before the second coat of paint was dry, I very carefully peeled off the sticker with a pin.

When I started putting on a second coat of paint some of the first coat pealed off.

As you start to apply your second coat of paint you -LSB-...]

Once dry to the touch, give them a second coat of paint.

I still haven't gotten my second coat of paint up — I want a sunny day so I can see what I'm doing and mother nature is not cooperating.

Saturday morning I applied my second coat of paint and then waited for everything to dry thoroughly and began applying the wax.

Let them dry for majority of the day and then give a second coat of paint!

The next day I applied a second coat of paint and let it dry for 4 hours.

I inspected the doors after the second coat of paint was dry and found a few small areas that needed touching up.

Then I applied a second coat of paint.

Once the second coat of paint dried, I wanted to add a fun design to the tray.

My friends at Saltwash use latex paint with a semi gloss coating for the second coat of paint and forgo the top coat but others use dark wax, tung oil, hemp oil or other top coats.

I always lightly sand in between coats when painting to help smooth the texture of the first coat and to give the second coat of paint something to hold on to.

Next I added a second coat of paint because there were a few areas that needed more coverage.

Add a second coat of paint if desired; let dry.

Above you can see my husband putting on the second coat of paint.

After letting it dry for 30 minutes I applied a second coat of paint.

While the second coat of paint is still wet, carefully remove FrogTape by pulling away from paint.