I nailed the outside trim sides (1 × 4's) to
the sheet of plywood using 18 gauge, 1-1/4 inch finish nails and my Bostitch nail gun.
Not exact matches
I
used the same studs,
plywood, and
sheet metal roofing that the other carpenter
used, but he put his together according to set
of blueprints that showed all the pieces fit together as a unified whole.
«Formed
using thousands
of sheets of plywood that slot together to create a skeletal mesh, the artist filled in, fleshed out and re-sculpted this one -
of - a-kind artwork from hundreds
of recycled broken pallets.
Preparing his signature surface involves bolting a standard four - foot - square
sheet of plywood to wooden stretchers, onto which he glues 12 - inch - square vinyl floor tiles and applies butyl rubber (commonly
used in roofing) to the surface.
In the three - part sculpture series Africa Restored (2003), for example, Marshall layered
sheets of black
plywood into a Cubist representation
of the African continent - a reflection
of the predicament
of black artists whose
use of this African - based style has been labelled as derivative
of white Cubists.
Judd, Donald (1928 - 94) American avant - garde abstract sculptor, highly influential exponent
of minimalism, who
used industrial materials like plexiglass,
sheet metal,
plywood.
The matching end and coffee tables are a study in clean yet striking modern design, and they do an amazing job with resource efficiency; the end table
uses one
sheet of 3/4»
plywood, and the coffee table
uses two
sheets.
Otherwise I wonder how much more efficient it really is than
using conventional wood framing; there is a lot
of complicated cutting out
of the
sheet of plywood and a fair amount
of waste material here.
Materials
used include eight hundred pallets and 750 square metres
of plywood, board offcuts, dismantled poles and battens, rickety tables, freight palettes, old theatre sets, empty plastic water - cooler bottles... and other
sheet material.
We built the tall cabinet to the left
of the doors you see in the photo above - about 3.5 years ago,
using a
sheet of plywood.
After that, I attached the 1 ″ x 2 ″ s to a 2 ′ x 4 ′
sheet of 1/4 ″ thick
plywood using a pneumatic nailer.
counter space to your laundry room by
using sheets of plywood to create a waterfall countertop.
1 —
Sheet of 3/4 ″ Plywood or MDF (Can use 1/2 sheet, tabletop will be 6 ″ narrower) 3 - 8 ′ 1 × 12 (Tops and Small Shelves / Two Large Shelves and One Bottom) 1 — 12 ′ 1 × 12 (Ends, Dividers) 1 — 12 ′ 1 × 10 (Small Bookshelf Sides) 7 — 8 ′ 1 × 2 2 — 8 ′ 2 × 2 2 ″ Finish Nails 2 ″ Screws or 1 1/4 ″ Pocket Hole Screws Wood Glue Finishing Sup
Sheet of 3/4 ″
Plywood or MDF (Can
use 1/2
sheet, tabletop will be 6 ″ narrower) 3 - 8 ′ 1 × 12 (Tops and Small Shelves / Two Large Shelves and One Bottom) 1 — 12 ′ 1 × 12 (Ends, Dividers) 1 — 12 ′ 1 × 10 (Small Bookshelf Sides) 7 — 8 ′ 1 × 2 2 — 8 ′ 2 × 2 2 ″ Finish Nails 2 ″ Screws or 1 1/4 ″ Pocket Hole Screws Wood Glue Finishing Sup
sheet, tabletop will be 6 ″ narrower) 3 - 8 ′ 1 × 12 (Tops and Small Shelves / Two Large Shelves and One Bottom) 1 — 12 ′ 1 × 12 (Ends, Dividers) 1 — 12 ′ 1 × 10 (Small Bookshelf Sides) 7 — 8 ′ 1 × 2 2 — 8 ′ 2 × 2 2 ″ Finish Nails 2 ″ Screws or 1 1/4 ″ Pocket Hole Screws Wood Glue Finishing Supplies
Plywood Plywood is a premium
sheet material made from layers
of hardwood that's most frequently
used by bespoke makers.
She builds it
using only one
sheet of plywood.
Using a portion
of a
sheet of 1/4 inch
plywood this project costs less than $ 15.
This project is so simple and can be built in just a couple hours
using 1
sheet of 1/2 ″
plywood and a couple
of 1x2s.
We didn't do one, but we just bought
sheets of plywood and had them cut into five inch strips to
use as paneling for our walls.