Sentences with phrase «side strips together»

7) Bring the long hemmed edges of two adjacent side strips together so they sit flush along their length and the top raw edges of the strips match the raw edge of the main fabric underneath.

Not exact matches

When you say line a springform with parchment, do you just mean to cover the bottom, then assemble the springform and leave edges sticking out all around the bottom, or do you put a big piece over the top once the springform is put together and then push it down into the bottom, with edges sticking out around the top, or cutting two pieces of parchment to line the bottom (with a circle) and sides (with a strip) perfectly?

Tape the strips together, lining up the straight (uncut) edges parallel; you are now working on the back of the mummy wrap — the flip side will show the uneven angles.

Fold strip of fabric lengthwise, right sides together, and sew with a 1/4» seam allowance, as shown in the photo.

Sew a 1 ″ x 8 ″ strip of leather to the top, right sides together, with a 1/4 ″ seam allowance.

I got the children to present their information on strips of coloured paper (similar to the colour of their planet), these strips of information were then stuck onto cut out planets (2 sides) the two sides were then stuck together with wire suporting them inside and we hung them on our classroom ceiling (in the correct order M, V, E, M, J, S, U, N - we also created a sun to hung before Mercury and decorated the planets with strips of metallic paper, glitter, tissue etc).

Note: For the double layer, cut out a strip of fabric doubled in width and fold wrong sides together.

Take the first strip from the right - side - pile and pin it (right sides together) matching right edges.

You are going to start off by taking 2 strips of different colors and place right sides together and stitch along the top (you can finish each edge with a Serged or Zig Zag stitch as you go or when you have attached all the strips of fabric together).

After I sewed the cording to the stripped material (using my zipper foot), I then pinned that piece to the drop cloth material, right sides together.