Measure 5 1/2» from
either side of the drawer face and exactly half - way from the top and bottom (about 3 1/2»).
Measure, mark and position the drawer face so that there is approximately 1/2» space on all 4
sides of the drawer face from the edge of the drawer sides.
Not exact matches
On the other
side of the villa is the guest bedroom with two twin beds
facing a chest
of drawers with a LCD television.
On the other
side of the villa is the second master bedroom with a king size bed with bedside tables
facing a chest
of drawers with a LCD television.
On one
side of the villa is the master suite with a king size bed and bedside tables
facing a chest
of drawers with a wall mounted LCD television.
The guest bedroom on this
side of the house has a queen size bed
facing a LCD television on a chest
of drawers.
The
sides of the
drawers are coated steel, the cabinet
facings are solid oak with oak plywood insets.
Glue and attach with 1 1/4» nails driven into where the edges
of the
drawer sides meet the
drawer face.
(because we are attaching a shaker style frame on the front
of the
drawers to match the armoire, see below) Once the
face frame was up we filled in the gaps on the
side to create a shaker style panel, especially on the two
sides.
We installed the
sides and
face frame being careful to keep the
face frame out about 1/4
of an inch from the front
of the
drawers.