Sentences with phrase «slats so»

In older homes the upstairs balconies used to be covered with these slats so as to keep the harsh sun out while letting in the breeze.

Wood blinds and shutters Monthly: Close slats so they lie flat.

Because our house is a new craftsman style house and our ceilings are really high, I knew I wanted wide slats so they would make a real statement in the room.

The door on this dog crate measures 13.75» x 16.75» and there is only 1.75» between the wire slats so your dog will not be able to get their nose or paw caught.

The slats for such gaits should be no greater than 3 1/2 inches between two slats so baby doesn't get his head stuck in the slats.

Not exact matches

Even so - called «SIDS safe» products, like mesh bumper pads and individual slat covers, present unknown risks and are best left out of the crib.

The safety standards for cribs now require that the slats be close enough together (2 3/8 inches or less) so that a baby's head could not get wedged between them.

Apply the glue to the sign and not the pumpkin so you can make sure to hit the slats.

Although cribs are getting safer and safer — or so they tell us — there's always the possibility of a growing child getting stuck between the slats or learning to crawl over and escape.

Older models with a drop - side rail, slats that are too far apart, or lead paint can pose hazards, so also check the CPSC for product recalls.

The thing is, this woman was still cosleeping — the crib was right beside her bed so she could put her hand through the slats and touch her baby.

Slat of crib should be 2 3/8 inches so -LSB-...]

To claim that there is NO chance of an adult overlaying a baby would be ridiculous, but so would it be irresponsible to claim that an infant could never be killed while traveling in an automobile, or while sleeping alone in a crib which has an overly soft mattress, or crib slats which do not prevent the infant's head from passing between them.

Also, these mattresses are heavier so they require a supportive foundation with slats no more than 2 inches apart.

The slats shouldn't be more than 2-3/8 inches apart (about the width of a soda can) so your baby can't get her head stuck in them.

If your baby's bed has slats, they should be no more than 2 3/8 inches apart, so your baby's head can't fit between them.

You MUST make sure that the slats are not so wide apart that your baby's head or leg could become entrapped.

The slats should be close together so that a small leg, head or arm can not get stuck!

They don't have slats, so you don't have to worry about loose slats or the distance between slats; however, make sure no holes are in the mesh and that the mesh is less than 1/4 inch in size.

The slats should be narrow enough apart so that the baby can not get his or her foot stuck in the gate or can stand on the horizontal rail which can make the gate unsteady.

It's still important to have some kind of guard in place so pudgy arms and legs don't get stuck in the crib slats.

«So many people in prison fell through the educational slats.

The trap contains a series of slats that slow down the water flow so that any gold, mercury or amalgam settles out.

As a runner, I love the feel of the slat belt, and the unique speed and incline knobs make it so that when I change it up, my workout still flows.»

KEY PRODUCT POINTS Bed has slat roll so can use with or without a box spring.

Bed has slat rolls so can use with or without a box spring.

I just carefully hand stitched the drawstring bag in between the wicker slats of the elephant (which is also easy to remove at some stage if so desired).

The signature front grille with the massive «iron logo» in the centre, is smaller with horizontal slats and so are the headlamps with the Thor's hammer LED DRLs.

Tallness, as it turns out, is a trait that Audi wants to draw attention to, going so far as to set the Allroad apart as the only Audi model to lead with vertical slats on its hexagonal grille, a feature that emphasizes height.

Also is changed and the look of the front bumper, while the horizontal slats on the air vents below the headlights were replaced by vertical routers so the car got visually on the dynamics.

That Black Mesh grill looks so much better than the regular slat grill, if they were smart they would put it on all their models.

Frank Howarth needed to design some bookshelves for his parents» new house, so he came up with a modular design that doesn't require doubling up on vertical slats of plywood.

Also, if you decide to build with metal, the slats should be fairly close together so your rabbit can not get his / her head through.

I was able to bring back actual specimens from Sanibel, so the first floor component (tilted square of four slats like his with four mirrors), which is closest to Smithson's non-site, has parts inspired by him.

So I did a show of those, adapting and reconfiguring slat paneling into Stellas.

But Auerbach proceeded to remove slats from either side with either hand and exchange them, in a pattern of her own mathematical devising, so that the opposite ends are «chiral» - slightly asymmetrical mirror images of each other.

I recently decided to make a shelf using so called 1 ″ X 2 ″ pine slats.

Wooden patios and decks can be warped by cold weather, so you'll want to replace loose or missing slats as needed.

With the bed I chose, the side rail height is only around 4» from the slats where the box spring sits, so I had to find a low profile foundation that wouldn't be exposed.

Another slatted ceiling, This one is done with real wood so it has more character than the MDF style slats.

Mini-blinds have evolved in types and sizes of slats and are now anti-static so they don't collect a lot of dust.

They seem so thin and shallow that it wouldn't take much to kick out one of the slats.

I think the horizontal slats made the windows and ceiling look not quite so tall and pleasing to the eye allowing in much light.

How did you even know these little slats would even come out??? I swear, I need to start being so timid withmy crafts!

So I did what all the super-DIY bloggers do, I took a little trip to the hardware store and found some wood slat shelves that seemed like the perfect way to recreate the look.

The slats are all held together with a nylon ladder cord that travels through the slats to tilt and raise the blind, so the holes punched into the slats to take the cord will allow light to bleed into the room.

TIP: I've used this technique a lot, so I was able to work with all the little slats, but I wouldn't attempt a project with slats for your first time using stain as a glaze.

The bigger the slat size then the darker the blind will be in the closed position due to smaller quantity of slats, so there are fewer overlaps.

The remaining 3 slats (from Step 7) are placed so that the tops of the slats are flush with the top of the bottom rails and spaced 13/16 ″ apart.

Just use a tiny amount of glue so you don't glue the slat to the cord by mistake!