That sounds practically impossible,
so drilling holes into OLED panels or using so - called «BM (Black Matrix) area within displays» are also in consideration, at least for the time being.
The TV stand we purchased is actually a sideboard,
so we drilled holes in the back for our cords and moved the shelves to allow the far left compartment to fit a bin of Benji's toys.
BE SURE to drill the holes on the INSIDE of the star
so the drilled holes will be in the cut out portion of the star's interior, not the «points.»
I love older homes with their fun built ins:) There was a plug on the inside of the pantry
so I drilled a hole through the wall so I could hang a CD player.
Not exact matches
«In the days before cell phones were commonplace, we
drilled holes into the concrete and ran hard lines to telephones on each table,
so people could talk to their office and do work.»
Why boil tar and
drill five miles in deep water if we just poked a
hole in the ground for
so many decades?
Cypress Development (CYP.V) seems to have a relatively easy job
so far, as all completed
drill holes returned thick mineralized intercepts, both on the Dean and Glory projects.
Home Depot coats the inside of its cans with protective resin,
so I cleaned that out with some solvent, washed that out thoroughly, then marked some
holes for
drilling.
One thing I read to help with the bucket washer is to
drill holes in the plunger
so the water moves through it.
We used a No
Holes kit on the banister so we did not have to screw or drill any holes into the banister
Holes kit on the banister
so we did not have to screw or
drill any
holes into the banister
holes into the banister post.
Holes are
drilled through the tree
so a lights garland can be hung into them to add a warm glow to the decoration.»
It comes with wall protecting design and separate extensions (4 and 6 inches),
so you can adapt the gate to expand up to 44 inches wide without having to
drill any
holes in your wall, thanks to the pressure mounted attachment.
So, make sure you're comfortable with the height settings or you will have to
drill some
holes yourself and that would solve the problem.
My husband is always teasing me for doing similar stuff... like saving the swiffer bottle, and making him
drill a
hole through it
so that I can mop the floors with vinegar / water and essential oils.
Eliminate mosquito breeding sites by emptying standing water from flower pots, buckets, barrels;
Drill holes in tire swings
so water drains and keep children's wading pools empty and upside down when not being used.
The guard has mounting
hole drilled in either side
so you can attach it a stick and use it as a spear if needed.
Lastly, this scroll saw comes with
holes drilled in the base,
so you can easily and securely mount it to your workbench.
«The pore spaces, or tiny
holes, in the rock remain filled with these ancient oceans,
so when we
drill wells today that water is produced to the surface,» Tinker says.
She baited the box with raw meat, and she
drilled holes in the box's sides
so that the prize could be seen and smelled.
Herr
drilled holes throughout legs fashioned from aluminum tubes, making them
so light that they just barely supported his weight, while increasing the number of pull - ups he could do and the distance and speed with which he could climb.
Some were convinced it was caused by wind that got trapped inside the ear and swirled around endlessly,
so they tried to liberate the wind by
drilling a
hole into the bones around the ear or using a silver tube to suck air out of the ear canal.
The
drill appeared to break into the lake at 12:10 a.m. Jan. 26; the hose was pulled up
so a camera could be lowered down the
hole to confirm the break - in.
The Russians have engineered their system
so that when they break through into the lake, water pressure from below is supposed to push the
drilling fluids up the
hole, rather than letting them pour into the lake and contaminate it.
I'm actually excited by the thought of leaving rental life behind, of
drilling permanent
holes in the wall and not feeling
so transient (and, if I'm being honest, what REALLY excites me is the thought of designing and building my dream closet!).
So I had to fill the
holes, sand, paint, wax and
drill new
holes!
I have already messed up too many
holes in the walls of our home...
so I have banned myself from using the
drill... for now.
To bleach a tooth in this manner, the dentist will
drill a
hole and put the Tooth White bleaching product into it (if it's's a front tooth, the
hole will be on the back
so you can't see it).
One is a street magician played by Jim Carrey, whose character's idea of magic is to engage in various masochistic activities, from hammering a nail into a table with his forehead to scalding his arm over birthday candles
so that the blisters spell out «Happy birthday» to
drilling a
hole in his skull with a power tool.
If there is sufficient metal surrounding the bolt
so fitting a larger bolt will not impact structural integrity centre punch it (
so your
drill bit won't slip)-
drill it out and tap a new thread in 3 stages to accept a larger bolt.Use a pilot
hole then ever larger
drill bits.Not applicable in all cases; but one option that has stood the test of time
I have plenty of access but it is a grade 8 bolt
so just
drilling a tap
hole is a chore.
Up front the «over-fenders» are a two part item that add 30 cm to the Aventador, one section is bolted onto the front bumper while the second section goes above the wheel and in front of the door, some really exact fitting is needed
so you don't mess up those trademark upward opening doors, once fitted at exactly the right spot you'll have to
drill holes into the fender, apply a rubber strip between the add - ons and the original fender and bolt everything down.
To that end, Owens Products makes a wide array of custom fit bracket kits that (where applicable) are designed to use your vehicle's existing factory
holes,
so no
drilling is required.
But that said, if I get into writing and the characters don't want to be forced into the
hole I've
drilled for them, I let them have their way — as long as the book ends up where I want it to,
so that the story arc of the series stays on track.
Lenovo even
drilled a
hole in the kickstand,
so you can hang your tablet on the wall and view movies.
The S3452
Drill comes with 25 different hole sizes and 8 speeds so you can drill super clean and precise h
Drill comes with 25 different
hole sizes and 8 speeds
so you can
drill super clean and precise h
drill super clean and precise
holes.
You can also
drill holes in any large, sturdy plastic container
so that grain comes out as your horse pushes the toy around the stall or pasture.
Use food - grade PVC pipe, buy 2 end caps (make one side a screw top
so you can easily clean),
drill 1 or 2 small
holes just a bit bigger than your dog kibble, and fill with kibble.
In these playful, environmental works, such as spinach and banana (2013), Estna arranges her paintings in various positions, tilting them against walls, hanging them, and placing them on their sides; she often extends patterns to fabrics heaped on the floor and small spheres placed on pedestals, or
drills holes into canvases
so that light shines through them.
The
holes were
drilled into the floorboards of the house of worship
so that slaves escaping the South on the Underground Railroad could breathe while hiding underneath.
Given the history of coal mining in the area, each location needs to be treated with care
so as not to convolve gas fluxes that come directly from past or present mining activities with those that are following new
drill holes as the release pathway.
The
so - called dry rock geothermal involves
drilling very deep, pumping water down the
hole, where it heats up, and then pumping the hot water back up to the surface using another source of energy.
As we add institutional investors, we will be talking to energy companies and sovereign wealth funds, and be establishing the specifics of the fundby the end of the year And you know, there are some areas, like geothermal or carbon capture and sequestration, that relate to the kind of skills — seismic understanding,
drilling holes in a safe way — there are some things that you'd expect the existing energy industry to really explore and try to make those as economic as possible,
so that they will be important participants.
The two
holes were
drilled just far enough apart (30 kilometers)
so that anything that showed up in both cores must represent a real climate effect, not an accident due to bedrock conditions.
In freshman physics lab I built an up - side - down thermometer (block of parafin with
drilled hole for mercury, hollow glass tube
so the mercury level fell when the temperature rose).
You can even get a split Styrofoam «Y» adapter
so you only have 1
hole to
drill, similar to the Zehnder.
If you stick two
drill holes into a tree, what are the odds that you're going to hit dead center in both of them to within a mm or
so with a manual dendro corer?
I did not want to
drill a 2 + inch
hole through the floor,
so I used a reducing bushing to cut the size down to 3/4 inch PVC (which fits through a
hole slightly over 1 inch in diameter).
He and his colleagues set up camp at a new spot every few days and
drilled holes 300 feet or
so into the ice.
That is why we love Product Service Systems
so much; to quote Alex Steffen again, «why own a
drill when what you really want is a
hole?»
You have a lot more knowledge,
so you are able to move on a quicker basis to
drill a relief well than if you are
drilling the initial
hole.