Sentences with word «sorbent»

Using these structures as oil absorbers might potentially solve two problems at the same time — the removal of unwanted plants and the production of natural and selective oil sorbent material at low - cost.

Preliminary results were published in a study in the Journal of Materials Chemistry A, titled «Advanced oil sorbents using sequential infiltration synthesis.»

With 50 years of experience in developing sorbent solution technologies, Multisorb has attained a leadership position in the United States and Europe.

Originally invented to clean up the BP Oil Spill pulling long oil sorbent using wind power by Cesar Harada, Protei is now a platform technology to transport scientific payload and clean - up equipment at sea, developed by an global community of scientists, engineers, makers and sailors.

Because of the amount of sorbent needed, DSI will likely be implemented most often at plants that are 300 megawatts or less and burn low - sulfur coal.

To comply with MATS, it is assumed that all coal - fired plants have flue gas desulfurization equipment (scrubbers) or dry sorbent injection systems installed by 2016.

Under today's settlement AEP agreed to install pollution - curbing dry sorbent injection (DSI) technology on its massive Rockport coal - fired power plant in Southern Indiana.

Eisenberger and Chichilnisky say GT overcomes the issue that has bedeviled efforts to capture CO2 from the flue gas of coal plants with sorbents — the «parasitic load» problem, or the fact that the extra energy it takes to capture carbon would reduce the efficiency of the coal plant.

Asaleo Care, the owner of brands including Sorbent toilet paper and tissues and Libra feminine hygiene products, has made a quiet entry into the nappy market in Australia but its chief executive says he will be careful about firing up any full - scale onslaught against the market leader.

For those curious about this novel carbon capture technique, the original study was published a few years ago in the journal Nature, under the title Encapsulated liquid sorbents for carbon dioxide capture.

These have resulted in a high market demand for eco-friendly sorbents which have greater absorbency and water repellent properties, as well as effective heat insulation materials that are less costly to install.

Novel metal organic frameworks have shown significant potential as CO2 sorbents.»

The researchers used a variety of precursors to synthesize porous carbon - based sorbent materials chemically activated at temperatures between 500 and 800 degrees Celsius (932 to 1472 degrees Fahrenheit) and carefully measured their carbon dioxide - capturing capacities at pressures between 0 and 30 bar.

This carbon dioxide - free sorbent can be reused for many adsorption and desorption cycles.

The team, led by scientists from Harvard University and Lawrence Livermore National Laboratory, employed a microfluidic assembly technique to produce microcapsules that contain liquid sorbents, or absorbing materials, encased in highly permeable polymer shells.

The new technique for carbon - capturing employs an abundant and environmentally benign sorbent: sodium carbonate, which is kitchen - grade baking soda.

Environmental Applications of Magnetic Sorbents: natural geosorbents and surfactant - based mesoporous materials for the recovery of persistent organic pollutants and oxyanions

Y.Soong, M.L. Gray, R.V. Siriwardine, K. L. Champagne - Novel Amine Enriched Solid Sorbents for Carbon Dioxide Capture First National Conference on Carbon Sequestration, National Energy Technology Laboratory

Multisorb to show how sorbent technology helps food products retain freshness and extend shelf life

In addition to low thermal conductivity, these novel aerogels have several unique features, one of which is super high oil absorption capacity — it is up to four times higher than commercial sorbents available in the market.

And Lewis, was awarded a grant from the Department of Energy to develop new sorbent materials, or «nano - sponges» that utilize light to open and close nano - sized pores.

They say their company, Global Thermostat (GT), uses proprietary sorbents that can capture carbon at substantially less cost and with less energy use than scientists have previously assumed.

These laboratories usually carry out an Enzyme - Linked Immuno - Sorbent Assay (ELISA) on the samples.

«We take a consultative approach, working with our customer from concept to sorbent dispensing and beyond.

As the World Leader in Active Packaging Technology ™, the company provides customized sorbent solutions that work to actively regulate the packaging environment.

«We provide the technical support to select the correct sorbent, provide manufacturing dispenser support and aftermarket support — essentially it is a total systems approach for our customers.»

Until now, no studies have examined sago waste's potential as an oil adsorbent, despite its resemblance to previously studied natural oil sorbents such as cotton, wool and bark.

The simulations revealed a selection of promising materialsdubbed specific anion nanoengineered sorbents (SANS).

The air extraction device, in which sorbents capture carbon dioxide molecules from free - flowing air and release those molecules as a pure stream of carbon dioxide for sequestration, has met a wide range of performance standards in the GRT research facility.

These typically use a chemical sorbent, usually lime or limestone, to remove SO2 from the flue gas.

[i] FGD sorbent is a system used to remove sulfur dioxide from exhaust flue gases of coal units.

b. Climeworks: Based in Zurich, Switzerland, Climeworks is employing a novel sorbent coupled with a temperature swing to release the captured CO2.

c. Global Thermostat: Based in CA, USA, Global Thermostat is pursuing a DAC technology based on proprietary amine sorbents with a temperature swing for regeneration.

A breakthrough study conducted by PNNL and researchers from the University of Washington and Oregon Health & Science University shows how using a relatively simple method for engineering nanoparticle heavy - metal sorbents may lead to an advanced method for eliminating toxic heavy metals from aquatic systems and drinking water.

Two other Columbia University professors who have been working separately from Lackner's group, Peter Eisenberger and Graciela Chichilnisky, also are focused on sieve - like sorbents as a means for extracting CO2 from air.

Professional Summary Dedicated natural resources professional excels in attention to detail and focus... Sorbent Tube Air Monitoring Work History University Resources Specialist, 02/2016 to 08/2016 Stephen F

Their duties include transporting supplies and assisting with wildlife rescue, but the majority of ships deploy containment and sorbent boom to collect the oil.

Asaleo Care's portfolio of market - leading brands includes Sorbent, Handee, Purex, Libra, TENA, Tork, Treasures, Deeko, Viti and Orchid.

Another option is a built - in sorbent solution.

- Congwang Ye, LLNL engineer and principal investigator for the MECS (Micro-Encapsulated CO2 Sorbents) team

DSI systems generally do not require significant capital expenses, but may rely on significant quantities of sorbent to operate effectively, which increases the operating costs.

Dry sorbent injection (DSI) is a pollution control technology that may play a role in the United States» electric power sector's compliance with the Mercury and Air Toxics Standards (MATS).

The costs of the equipment needed to control acid and toxic metal emissions, such as flue gas desulfurization (FGD) and dry sorbent injection (DSI), play a significant role in retrofitting and retirement decisions faced by coal plant operators.

NiDOBDC, MOF - 5, and other members of this new class of framework - based sorbents are extremely porous.

The new technique employs an abundant and environmentally benign sorbent: sodium carbonate, which is kitchen - grade baking soda.

At the conclusion of his talk, he mentioned his interest in pursuing other magnetic sorbents, such as magnetic ionic liquids.

One particularly attractive possibility that has been proposed involves using an «exchange resin» sorbent which binds CO2 when dry and releases it when wet.