Sentences with phrase «standard wall socket»

The iHome iSP5 SmartPlug fits in and above your standard wall socket and is able to switch on and off with Siri.

The iSP5 SmartPlug fits into any standard wall socket, so you can plug in lamps, fans, or other appliances just as you normally would.

You can charge the Model S from a standard wall socket, but it will take a long time for you to give the car any sort of useable range — we got 85 miles after 14 hours charging from zero range.

It will take 20 hours to fully charge from a standard wall socket, or just three if you opt for the fast - charge wall box.

Includes a 6 foot cord and plugs into any standard wall socket.

Not exact matches

It takes two hours to fully recharge the battery on a 240 - volt Level 2 outlet, and 14 hours plugged into a standard 110 - volt wall socket (the charger is stored in a panel on the left side near the trunk opening).

The center console's charging plug has been re-engineered so that electronic devices charge as quickly as if plugged into a home wall socket, the cupholders have been redesigned, and a 60 / 40 - split rear seat is now standard on all models.

The smart fortwo electric drive will be able to be charged from any normal household 110 - volt wall socket with a provided standard cable.

Charging the battery to 80 percent only takes 24 minutes using a 100 - kW fast charger, and an integrated in - cable control box (ICCB) allows the vehicle to charge using a standard 120 - volt wall socket.

Mercedes says that the battery can recharge in eight hours on a standard European wall socket or in less than an hour with the onboard 22 - kilowatt high - capacity charger.

This is down from 3.5 hours using the standard 4.6 kW charger, or under six hours with a domestic wall socket.

Cold, claustrophobic room overseeing the graves of the Montmartre cemetery, just one accesible wall socket, the heating did nt work, i left there with a cold; very poor breakfast even for budget hotel standards

To set up the bulbs, simply screw them into a standard light socket and then turn them on (they need to stay on during the configuration process so if they are attached to a wall - switched fixture it would be wise to tell anyone in the vicinity not to use the switch until you're done).