Sentences with phrase «stroker kit»

JUN is showing their new 4.0 liter stroker kit for the VR38DETT at the 2009 SEMA Show in Las Vegas.

Also you can buy stroker kit 2.8 L, increase the boost to 30 psi (2 bar), and, using race fuel, you will obtain 800 + WHP.

[46] Performance parts manufacturer JUN also offered engine upgrades for the MR2's 3SGTE engine which came in the form of stroker kits, which were co-developed with Cosworth.

GReddy engineers have drawn from our FR - S race experience to assemble a complete stroker kit for the FA20 / 4U - GSE boxer engine, using only superior components.

Also stroker kit may be used, then displacement will reach 2.8 - 2.9 L.

You can also buy 2AR - FE stroker kit, which is able to increase the capacity up to 2.7 liter.

Making your S2000 even more powerful is not an easy task; you will have to buy a 2.4 L stroker kit or make a sleeved block for 90 mm pistons and install a 106 mm crank, but these are very rare and individual projects.

If you want to increase the level of HP, you will need M54B30 stroker kit which includes crankshaft, connecting rods, pistons, intake manifold, injectros, ECU, throttle body and intake camshaft.

Inside the block, a Brian Crower (BC) 4.0 Stroker Kit with JE Pistons and BC 4340 crankshaft, connecting rods, and ARK oil cooler ensure maximum output with superior durability.

You can get even more power if you use custom cams and a 2.7 - liter stroker kit.

After that there are two ways: to buy stroker kit or aggressive cams.

The price of stroker kit is higher than the cost of all vehicle.

It retains four - wheel drive, has a lighter body (carbon bonnet, aluminium boot, thinner glass), and uses Cosworth's 2.2 stroker kit, billet crank and conrods.

To achieve the highest result (1000 + horsepower), 87 mm forged pistons or stroker kit 2.8 L will be enough.

The «T020» [32] as it was called, was powered by a naturally aspirated 2.2 L stroked 3S - GE that produced 175 kW (235 bhp) @ 6,800 rpm, this was due to more aggressive «F3» cams, a stroker kit, better intake flow with the aid of the «TOM»S Hyper Induction Carbon» intake kit, and an upgraded exhaust system labeled the «TOM»S Barrel», a lightened flywheel was also equipped to help the engine rev easier.

All you need is to install Stroker kit.

Sometimes RB30E cylinder block and RB26DETT head are combined, as an alternative to stroker kit 3.0 L.

Tuning of the F22C Engine is the same as for F20C, but you already have the stroker kit installed.

The engine also benefits from a Brian Crower 4.2 stroker kit and ceramic coated headers.

To approach 300 HP at the wheels, you have to perform the most of head porting and install the 2.2 - liter stroker kit (90.7 mm F22C crank + aftermarket F22C rods or a Spoon 2.2 stroker kit).

Short front and rear overhangs, a big engine bay, stroker kits to take the engine to five litres, the availability of diff locks, easily increased ground clearance, a sturdy chassis and lightweight, aluminium body all contribute to make the Rangie a feared off - road competitor.

It is powered by a 409ci fuel - injected engine with aluminum heads and stroker kit, and an ’05 Corvette transaxle 6 - speed manual transmission at the rear of the car.