That power gets routed through
a suspension designed with stiffer springs and anti-roll bars while ride comfort is supposedly unaffected.
The patented Alfa Link rear
suspension designed with vertical rods enhances performance, driving pleasure and passenger comfort.
In addition to its interior aesthetics, the GT shares its multilink front
suspension design with the 7 - series (as well as the X5).
In the rear, GM replaces the pickup's semi-elliptical
suspension design with a new asymmetrical leaf - spring setup.
In the rear, an independent rear double - wishbone
suspension design with the coils located on the toe control link (offset spring and shock) with stabilizer bar improves ride quality and optimizes handling, especially on rough road terrain.
The front axle is a three - link
suspension design with aluminium torque struts and McPherson spring struts offering outstanding precise wheel location and a high level of ride comfort.
A proven MacPherson strut front
suspension design with specially tuned bushings and geometry intended to balance handling with comfort
However, Ford will surely use an independent front
suspension design with a Dana - supplied front differential and axle half - shafts that route through the double A-arm and MacPherson strut suspension.
Ultimately,
the suspension design with wider tire sizes, standard ABS and standard Vehicle Stability Assist is intended to enhance driver confidence and handling performance.
While the Rebel shares a basic
suspension design with its more pedestrian counterpart, the Rebel has a lot of tricks intended to tweak the 1 / 2 - ton Ram for off - road enthusiasts.
Not exact matches
Beneficial effect of lower effective tax rate in light of pricing and benefit
design assumptions associated
with the 2017 temporary
suspension of the non-deductible health insurance industry fee; excludes Individual Commercial segment impact
We use specially
designed refrigerated trucks to transport our goods, and the trucks are equipped
with air - ride
suspensions so the products have a gentle ride and aren't bounced around a lot.
This means that they can
design their own rear
suspension geometry, rather than adopt what Mercedes have done this year
with their raised top wishbone which lowers the rear roll centre for better traction.
Make sure the jumper is not
designed with a single
suspension strap.
Along
with the specially
designed frame is the rear wheel
suspension which works as an incredible duo to keep your child from getting disturbed.
The strollers were specially
designed to glide
with ease so you can run alongside
with your child while the
suspension system keeps them safe from bumps and lumps.
This stroller
design benefits avid runners
with great
suspension for the little ones and durable wheels.
Three - wheel
design with suspension ensures easy maneuverability and a smooth ride.
The stroller is
designed with an adjustable
suspension system consisting 2 position shock absorbers.
Our options are fastidiously
designed — from breathable mesh seats in bright new colors to larger wheels
with plush
suspension — to organize you for any journey that will return your means.
The stroller offers excellent maneuverability
with its six - wheel
design, full
suspension system, and locking front swivel wheels.
• folds extremely quickly and compactly, even
with the seat fitted • lightweight: only 19.18 lbs • converts fast and easily from stroller to pram • height adjustable push bar • ultra-sleek
design • adjusts to multiple positions, including a flat, ergonomically correct sleeping position • reversible seat (sleeping position can also be adjusted to face both directions) • additional option: set air tires (rear wheel only) • front wheels swivel 360 ° for more flexibility • ultra-light pram body (7.5 lbs) • integrated mosquito net
with the pram body for fitting over the pram body • extra-layered mosquito net fitting under the canopy to ensure good air circulation on warm days •
suspension in chassis and front wheels to guarantee child comfort on rough surfaces • soft PAH - free mattress
with breathable mesh layer
From the stylish stroller
design with functional, high performance wheels and
suspension system to the safety certification by the American Society for Testing and Materials (ASTM), Baby Jogger double strollers offer an array of models to suit the needs of lots of families.
The bus - like
design of the Triplette is made more manageable through the addition of the steering wheel on the handlebar and big wheels
with suspension.
As one would expect from a company that
designs most of their products
with the adventurous parents in mind, BOB strollers are sturdy and stylish buggies that offer some of the best tires and
suspension systems in the business.
This affordable trampoline has a bungee cord
suspension system
with a padded cover that's
designed for hours of kid - safe bouncing.
«The
suspension model most closely complies
with HMRC's penalty principles, which include that penalty regimes should be
designed from the taxpayers» perspective, primarily to encourage compliance and prevent non-compliance, and that penalties are not to be applied or seen to apply
with the aim of raising money.»
A three - wheel
design with a
suspension system makes the stroller easy to control and gives your passenger a smooth ride!
It's made of stainless steel
with an aluminum handle and is
designed to look like the
suspension bridges in Portland, Oregon.
The
design elements make this look like a true Supercross bike, complete
with dual
suspension and adjustable handlebars.
Front wheels equipped
with swivel and
suspension make this
design easy to maneuver through the grass and on the pavement.
That's why Wolf
designed Onnit's new
suspension system, which features rings
with foot cradles attached to offer a full spectrum of
suspension exercises.
Primal 7, which has created powerful messaging
with its «Conquer Your Can't» campaign,
designed its
suspension straps for those who need help the most — those who are less experienced or fit — while still finding successful application for the high performers out there.
In cooperation
with a number of companies, General Motors engineers worked on the 1971 Lunar Rover and was responsible for
designing the electric propulsion system,
suspension, mesh wire wheels, and drive controller made to accommodate lunar gloves.
The
suspension — double - wishbone front and an integral - link rear — and optional 21 - inch R -
Design Wheels
with summer tires made this 4,045 - pound crossover into a multi-sport athlete.
Like the Camaro V - 6 and SS 1LE, the Turbo 1LE is
designed for «extreme track focus» by adding the Camaro ZL1's
suspension, brakes and tires, and comes
with a track warranty, Oppenheiser says.
With its active suspension and Cosworth - designed V - 8 engine with a near -13,000-rpm redline, the MP3 / 8A represented a technologically advanced era of Formula 1 with all the sights, sounds and sparks that many say is missing from modern Formul
With its active
suspension and Cosworth -
designed V - 8 engine
with a near -13,000-rpm redline, the MP3 / 8A represented a technologically advanced era of Formula 1 with all the sights, sounds and sparks that many say is missing from modern Formul
with a near -13,000-rpm redline, the MP3 / 8A represented a technologically advanced era of Formula 1
with all the sights, sounds and sparks that many say is missing from modern Formul
with all the sights, sounds and sparks that many say is missing from modern Formula 1.
It's the first ever four - wheel - drive VXR, has an electronic LSD for the rear axle and perhaps most importantly is equipped
with a totally new front
suspension design: HiPerStrut.
The truck comes
with beadlock - capable wheels, and a new Fox Racing Shox
design with a custom internal bypass that damps and stiffens the
suspension over rough terrain and reduces the chances of bottoming out.
The ragtop Defender 90 rides on a stock chassis and maintains the lines of the Solihull - produced body
with street - tuned
suspension, a set of 18 - inch Kahn
Design wheels shipped from the U.K., and a set of light - duty off - road tires.
Here, the tiny subcompact is packed
with 20 - inch wheels, a TS
Designs widebody kit, lowered
suspension, StopTech rotors, TRD Big Brake kit, Sparco racing seats, rollbar, and a DUB Edition audio system
with three amps, two 10 - inch subwoofers, and an Apple iPad.
The wheels are BBS centre - lock racing wheels shod
with Michelin «racing tyres», and the
suspension is lowered, but of OE
design.
The
design is fresh, and the 2.0 liter, four - cylinder engine combined
with the sport tuning of the
suspension makes this newcomer a fun runabout.
The XC40 R -
Design features a sport - tuned
suspension and the driving dynamics can best be described
with the sort of boilerplate clichés that hacks like me use when we can't come up
with anything else: It turns in sharply, grips eagerly, and the body stays relatively flat in the turns.
The ATS's front
suspension features a MacPherson - type setup
with a direct - acting stabilizer bar, while the rear receives a 5 - link independent
design.
On a set of mildly challenging twisting roads between San Francisco and Monterey, the Civic hatch held its own,
with the car's MacPherson strut front, multi-link rear
suspension design and optimized, fluid - filled bushings doing the heavy lifting.
Headquartered in Toronto but
with a substantial racing - oriented operation in the United Kingdom, Multimatic is a vendor that
designs, develops, and builds everything from the dampers found in the Formula 1 championship - winning Red Bull Grand Prix cars to the front
suspension of the Ford F - 150 truck.
It has specially formulated driving modes and steering rates, stiffer
suspension, and Pirelli P Zero tires — our car wore available 245/30 ZR20 front and 305/30 ZR 20 rear rubber —
with a distinct compound, structure, and tread
design to yield sharper turn - in response.
Other upgrades for the Korean Hyundai Elantra Sport include 18 - inch wheels, HID headlights, leather sports seats, a new body kit
with a front splitter and rear diffuser, a flat - bottom steering wheel, upgraded brakes, and a multilink rear
suspension instead of the standard car's torsion beam
design.
Underneath is a Stage 3
suspension kit from Addictive Desert
Designs with parts from Fox Shox and Deaver Springs.