Sentences with phrase «then epoxied»

A quarter - inch grid is then epoxied onto the baked enamel.

Instead of joining the bamboo frame pieces together with a bulky and rather unsightly mass of material, Pedal Forward uses steel «lugs» for the crucial joints (bottom bracket, seat post, head tube and front fork, and rear drop - outs), and then epoxies in «iron bamboo» tubes to build the frame.

I've also seen small logs cut into wafers and all laid out (sort of like a penny floor), then epoxy - d!

Not exact matches

Hmm, so you're telling me that a «heat shield» that was made of «special plastic» (as NASA called it back in the day), which was nothing but epoxy smeared over a ss honey comb «protected» the astros barreling into the upper atmosphere at hypersonic 5 miles / sec, or well over 30 times the velocity of a jumbo - jet and thru temperatures *** as quoted by NASA *** that are «10 times hotter than the surface of the sun», and then they «braked» with only a parachute to a safe splashdown?

Martin encases the chip in a faceted block of hard epoxy (middle), then polishes it to reveal a smooth cross section (bottom).

Lewis and Brett G. Compton, a former postdoctoral fellow in her group, developed inks of epoxy resins, spiked with viscosity - enhancing nanoclay platelets and a compound called dimethyl methylphosphonate, and then added two types of fillers: tiny silicon carbide «whiskers» and discrete carbon fibers.

It's build from a carved foam base, covered in a clay - like epoxy, then airbrushed with metallic colors to give it an iridescent shine.

Option 2: If the part is thin and flimsy, has hollow areas or many fixings meaning autoclaving a mould tool repair section from a non-damaged similar or mirror area in carbon is not possible, then we can manufacture small epoxy putty or high TG wet laminated fibreglass or Carbon Fibre mould tools off mirrored areas of the part.

It was coated with an epoxy primer and block sanded, then finished in stock PPG Roman Red paint with Blue Metallic and has matching red Torque Thrust wheels.

We then did any body work and blocked the jeep to perfection, A second epoxy sealer coat was used before spraying the base coat clear orange.

To lay this epoxy onto the foam, we would spray some water onto the foam then apply on a batch of epoxy.

It is imperative that Ofili's paintings be examined up close, only then is the precision with which he has layered the canvases using paint, epoxy and collage to introduce depth and texture revealed.

After kneading and squishing blobs of colored clay epoxy onto his supports, he then presses and flattens out one side of the mound.

Since then, she has made sculptures in plaster, concrete and epoxy resin.

Gueorguieva then created etching and litho plates for each structure, generating appropriate collage materials that were then draped over the metal and the thin layers of epoxy clay.

She then dots the figure with colorful epoxy resin, and finishes by layering on acrylic paint.

Tour the show — don't miss Camilla Huey's corset piece, made of silk, mica on tulle, paper and wood, for instance, or Simone Leigh's «Blue Torso,» created from porcelain, cobalt, epoxy, terracotta and graphite — and then come fall in love with Jasmin Zorlu's fish leather helmets in The Shop.

I build using wire mesh and hydrocal then cover with epoxy and ammo.

The length, height and width of each shell was measured, then we sectioned one valve of each individual lengthwise along its axis of maximum growth by first reinforcing with epoxy (JB QuikWeld, Sulphur Springs, TX), then sawing with a Isomet ™ Low Speed Saw and diamond edge cutting blades (Buehler Co.).

Wooden kayaks sparked his interest and then he determined «that wood is up to 10 times stiffer than fibreglass and nearly 6 times stiffer than a kevlar / epoxy composite.»

For instance, if your bathroom walls have blue tiles, then you can have a blue epoxy floor.

When it dried I sanded it good, then later added an epoxy -

Then the added prayers while I ready the epoxy... if you're not precise in your measuring and mixing the epoxy won't cure evenly — resulting in a do - over... I've had that happen before, don't want it to happen again...

The next morning, all looks good — except a surprise visit, from a fly that died landing in the then wet now dry epoxy... (we gouged out what we could and called the rest a fossil)