Truly, Splatoon's distinctive elements don't feel like
a thin coat of paint atop an existing formula.
I applied
a thin coat of paint to one of the taped off sections.
How to use it: Ceramic is not porous at all, so sand the surface with 120 - to 150 - grit paper and clean before applying primer, then add two
thin coats of paint.
Not exact matches
Which is lucky for the realtors, since their case was
thinner than a pre-sale
coat of paint.
Optional step: If you want your ornaments to last for years and years, seal them with three to four
thin coats of non-toxic acrylic varnish after the decorative
paint has fully dried.
So they took a
coat of white
paint to the place, with a layer just
thin enough so that the texture
of the brick peeks through.
If you want the rain jacket to have a «slick» look, try
painting it with a few
thin coats of shiny, dimensional fabric
paint or I even used stained glass
paint.
The product
of a senior design team in the Department
of Biomedical Engineering and Mechanics within the College
of Engineering, the Melt Mat is a thermally absorptive blanket made from a
thin sheet
of aluminum that has been spray -
coated with an ultra-flat black
paint.
With
thin film technology the bedrock
of microchip and microstructure manufacturing, the pioneering research offers a significant advance — potential applications range from
thin film
coatings for
paint and wound care to 3D printing, micro-casting and micro-fluidics.
To achieve Annie's signature look, apply a
thin coat of wax over your
painted surface with a small Chalk Paint ® Wax Brush.
Don't
paint a really
thin coat because the color
of the leaves will show through after it's dry, but don't
paint a super thick
coat either because you won't get a lot
of crackle.
I'm wearing two
thin coats of Skating in the Snow over tips
painted with Sally Hansen's Hard to Get, topped with Ciate's Speed
Coat Pro top coat and Hard Candy's Mattely in Love matte top c
Coat Pro top
coat and Hard Candy's Mattely in Love matte top c
coat and Hard Candy's Mattely in Love matte top
coatcoat.
While your striped nails dry,
paint one
thin coat of white polish on your ring finger.
Apply 2 — 3
thin coats of chalk
paint.
For me it's a combination
of 1) quality
paint 2) the right temperature (55 - 70 degrees) 3) a good Purdy brush, and 4)
thin coats.
Started a project using white milk
paint over a very dark piece (bleed thru is not the problem), it's just a much different chemical composition (
thinner coverage, even when mixing - in less water) and doesn't cover well, requiring a minimum
of 4
coats (great for some projects, but not this one).
Spray
paint the chest the color
of your choice, using two or three
thin layers, allowing them to dry completely in between each
coat.
I have remodled several kitchens with old cabnets using oil based
paint, sanding between each
coat of paint,
thinning each additional
coat of paint, etc etc..
To get this look I
painted one
thin coat of milk
paint, applying continuous long brush strokes from one end
of the table to the other.
Once the
paint is dry, I usually wait 24 hours, then I add a very
thin coat of Fiddes and Sons or Johnsons Paste wax and buff it with an old t - shirt to bring up a shine.
A
thin, barely - visible tightrope hovers over two different yet equally - treacherous perils: on one side, you risk missing the point
of the original and creating a follow - up whose character, plot, and theme barely resembles its source; on the other, you simply retread the familiar beats
of the previous work, applying a fresh
coat of paint to the old structure.
Not fearless enough to nose the camera in the dramatic mire, like a soldier to the cause in a personal guerrilla war, Diego Luna «s film beckons a
paint - by - numbers summary
of the man's greatest achievements, the spark notes
of a six - plus year period that glosses all with
thin coats, rarely taking the opportunity to remain in the moment and settle in with the hard - won emotional beats
of the characters.
In terms
of weight reduction, the LT uses carbon fiber body panels, less sound deadening material, a fixed polycarbonate («racing plastic») engine cover, Alcantara interior (replacing leather and carpet), a marginally
thinner windshield and rear glass, and even a lighter - weight
paint coating.
After choosing a safe primer and
paint for your bird cage, apply a
thin coat of the primer.
Make sure you keep your
coats of paint thin and don't let it drip.
Stella's stripes were made without the aid
of masking tape, and often the black
paint bleeds into the white gaps, or gets thicker and
thinner as Stella applied differing pressure or various numbers
of coats.
Momentarily abandoning the stupefying rhetoric
of immediacy that characterized his earlier photographic appropriations, he is now reinscribing his work in the well - lit field
of modern paradigms: by referencing the monochrome as he did in his previous «joke»
paintings, by reintroducing collage and silk - screen superimpositions, and above all by
coating some
of his appropriations with a
thin layer
of white
paint that is simultaneously on top
of and underneath the imagery.
In «Tablet 142» (1964 - 65), She attached
thin undulating pieces
of wood, most likely made by planing a board, to the front
of four vertical panels that have been abutted together and
coated with layers
of white
paint.
Yli - Mayry's dynamic work is distinguished by her deft use
of the pallet knife which she employs to achieve multiple effects, from a
thin, even
coat to thick lines, to a three - dimensional quality made by scraping lines into the
painted canvass.
They are now extremely fragile due to Pollock's unconventional use
of enamel
paint — essentially an industrial or household material (used to
coat gutters, not canvases)-- and techniques, which included
thinning down the consistency so that he could use a basting syringe, drawing with it «like a giant fountain pen,» as described by Pollock's wife, Lee Krasner.
Then she covers the surface with one
coat of white
paint,
thin enough that the lines show through.
The
paintings can take months to complete, the artist beginning with
thin coats of oil or tempera before the topmost layer is applied in a thick impasto.
The first consists
of seven low - lying sculptures, each a wooden feeding trough
painted with a fresh
coat of tractor - green and accented in yellow: Natural submission (all works 2015) features two
thin, parallel yellow stripes; Cult cultivates includes four yellow latex casts
of vegetables in a line along its basin.
Next, apply a
thin first
coat of paint, and let dry for about 48 hours to encourage the
paint to bond to the surface.
Once the
paint is dry, I usually wait 24 hours, then I add a very
thin coat of Fiddes and Sons or Johnsons Paste wax and buff it with an old t - shirt to bring up a shine.
If a stain appears, simply apply a
thin coat of Annie Sloan Lacquer directly over the entire surface to be
painted before
painting and lacquering again.
I then
painted it with 4 or 5
thin coats of General Finishes Milk Paint using a 50/50 mix
of Antique White and Snow White.
I stenciled «Tucson Arizona Territory» on top just for fun, and finished the
paint off with a
thin coat of wax, which went on easily and buffed out fast.
If a stain appears, simply apply one or two
thin coats of clear shellac directly over the entire surface to be
painted before
painting and lacquering again.
Next, apply a very
thin first
coat of paint and let dry for at least 48 hours to allow the
paint to bond to the surface.
I used chalkboard
paint for a matte finish... I
painted two
thin coats - first vertically, then horizontally... Make sure to
paint the sides
of the board (I forgot and had to go back and do this step.)
When
painting remember this rule
of thumb:
Thinner coats are better than thicker
coats.
After the first
coat of ivory
paint was sprayed on, I did some «touch up» because the
paint sprayer sometimes leaves some «
thin» spots.
I put a
thin layer
of Kills on the spots where I had bleed through and moved on to a new
coat of paint.
Next, after sanding and prepping the sides I
painted a
thin coat of Pure & Original island white and marked my holes again.
Once the primer was dry I applied two even
thin coats of the latex
paint.
The base is a large grapevine wreath that I spray
painted with one
coat of gold spray
paint, and a
thin coat of white spray
paint over the top.
For these, we wanted solid
paint coverage that would still allow the texture
of the wood grain to show through, something we knew we could achieve by doing multiple
thinner layers
of paint instead
of one thick
coat.
After finishing the second stain
coat, John switched back again to the
painted drawer fronts (also now dry), sanded them lightly, and
painted on a second
thin coat of Swiss Coffee.
You just apply a
thin layer directly on top
of your first
coat of paint and let it dry for about 30 minutes.