Sentences with phrase «throttle body gasket»

FELPRO THROTTLE BODY GASKET — Designed To Be OEM Stock High Quality Direct Fit Replacements For Stock Throttle Body Gaskets

Check upper intake seals first and throttle body gasket seals before replacing the lower intake and head gaskets.

well since replacing the throttle body gasket there have been no codes.

Not exact matches

Although the racing engine receives upgraded turbos, larger fuel capacity, and a racing - spec engine oil system, it shares the same aluminum block and heads, direct - injection system, gaskets, electronic throttle body, and valve springs with the production version.

I decided to swap the throttle body out and had an issue with the old gasket.

So I replaced that gasket and installed the old throttle body back on just to see.

Some Examples: Air filter clogged Exhaust leak plugged cat clogged fuel injector malfunctioning fuel pressure regulator clogged fuel filter malfunctioning fuel pump spark plugs, wires, cap, rotor, coil Vacuum leak dirty throttle body malfunctioning fast idle thermo valve (similar to vacuum leak) low oil (unless there is an oil level sensor) belts gaskets seals rings low compression bearing damage (rod knock) Broken cam rocker fell / broke off broken valve spring stuck valve critical engine damage (windowed the block) wiring, fuses, relays starting system - ignition switch, starter, relay Cooling system - clogs, leaks, flow (may throw a code if you overheat) transmission clutch (es) driveshaft, differential, axles brakes suspension tires hvac lights gauges

Throttle body / MAF Cleaning, IAC, Intake manifold gasket (he did not change the valve seals), temp sensor.

Transmission / transaxle case and all internally lubricated parts including ring and pinion gears; oil pump, cover, gears, housing and vanes; torque converter; valve body (s); throttle valve; valve pack; governor, gear and cover; parking gear and pawl; roll pins; sprags; sprockets; chain; springs; stator and shaft; pressure regulator valve; pressure switches; solenoids; bands; automatic transmission / transaxle clutch, drums, pistons and steel plates; planetary and sun gears; servos and rings; blockers; synchronizer hubs and keys; bearings; bushings; supports and shafts; control rings; yoke; extension housing; speedometer drive gears; accumulators and rings; adjusters; all internal fasteners, nuts and bolts; shift cover and forks; separate bell housing; transfer case and all internal parts contained within the transfer case; seals and gaskets.

These engines had issues with vacuum leaks at the throttle body and intake gaskets.

• Gen IV fuel injection nylon manifold used on the 2009 Corvette Z06 LS7 engine • Fully assembled with injectors, fuel rail, 90 mm ETC throttle body and gaskets • For use only with LS7 and LSX / LS7 - style cylinder heads NOTE: Must use Controller Kit P / N 19243066 source.

includes: High quality cast aluminum intake manifolds (L / R), Genuine Toyota - Japan AE111 20V Individual Throttle Bodies (48 mm butterflies), large cast runners and intake manifold plenum, necessary gaskets, heat shields, couplings, hose, mounting brackets, etc..

Issues that are cover in a certified pre-owned vehicle include, transmission / transaxle case and all internally lubricated parts including ring and pinion gears; oil pump, cover, gears, housing and vanes; torque converter; valve body (s); throttle valve; valve pack; governor, gear and cover; parking gear and pawl; roll pins; sprags; sprockets; chain; springs; stator and shaft; pressure regulator valve; pressure switches; solenoids; bands; automatic transmission / transaxle clutch, drums, pistons and steel plates; planetary and sun gears; servos and rings; blockers; synchronizer hubs and keys; bearings; blessings; supports and shafts; control rings; yoke; extension housing; speedometer drive gears; accumulators and rings; adjusters; all internal fasteners, nuts and bolts; shift cover and forks; separate bell housing; transfer case and all internal parts contained within the transfer case; seals and gaskets.

2004 Land Rover Discovery ONLY 63,600 MILES Items Fixed over last 5,000 Miles — ALL RECEIPTS AVAILABLE TOTAL COST OF UPGRADES AND REPAIRS: $ 6,646.94 (Not including minor items like wiper blades, clips, etc) 3 Power Door Lock Actuators New Lower cowl on front windshield Brand New full set of Oxygen Sensors (from Atlantic British) Replaced Cylinder Head Assembly — Both Banks delete throttle body heater Replaced Seals and Gaskets — Rear Axle — Pinion Seal $ 2291.58 Ignition Lock Replaced and Rekeyed — Backup Key Made Brand New Starter Motor Installed $ 688.60 New (used) set of 5 - 18 inch OEM Land Rover Discovery Hurricane Wheels $ 350.00 4 New Cooper Discoverer 255 / 55 / R18 Tires installed 1 New Sentury 255 / 55 / R18 Tire installed on matching spare wheel $ 897.74 New Bosch Battery (Pep Boys) $ 164.89 New Track and Tie Rod and Drag Link — Full Alignment Completed $ 659.94 New OEM Look Keyless Entry New Window Tent $ 936.65 Pioneer Head unit — Bluetooth and rewire install $ 377.55 + $ 280.00 = $ 657.55 I am happy to help with meeting whoever the buyer chooses for shipping.