Sentences with phrase «to mount the gate»

This means you need a pressure mounted gate for sure, but is the gate easily transported?

It is unique and provides an innovative alternative to traditional hardware mounted gates.

I'd recommend using a metal, hardware - mounted gate at the top of stairs.

Pressure and tension mounted gates for example should never be used at the top of stairs regardless of what the manufacturer claims.

Don't use a pressure - mounted gate in any place that is very important to keep your baby away from.

The second mistake is that many parents out of convenience use tension mounted gates improperly.

You'll want to buy a pressure - mounted gate so that you can easily remove the gate from the doorway when you're done using it for the day.

It is a pressure mounted gate meaning, it is easy to install because you don't have to use any hardware.

They offer pressure mount or hardware wall mount gates along with full super yards that create a completely safe baby space within a gated area.

Aside from their easy installation, pressure mounted gates tend to be less expensive than their hardware mounted counterparts.

Some parents complain that pressure mounted gate falls often.

At the the tops of stairs, use hardware - mounted gates only.

It is a pressure mounted gate as well as a permanently fixed gate, depending on your preference.

While the majority of pressure mounted gate purchasers do not use this feature, some customers prefer it because it gives them more flexibility if their situations change.

Pressure mounted gates also do not require special installation and will not permanently be fixed to door frames.

When you purchase a pressure mounted gate ensure that it is sturdy and use it wisely.

In general, you should only use wall - mounted gates at the top of the stairs.

It is a hardware mounted gate that comes with 2 sets of mounting brackets for ease of use in more than one place.

You can mount this gate in either right or left - handed opening as you wish.

It is a pressure mounted gate meaning no hardware required to install it.

Pressure mounted gates tend to be easier to install and rely on pressure between the two surfaces the gate stretches between.

If you need a gate for less dangerous parts of your home, you can use pressure mounted gate.

Instead use hardware - mounted gates on stairwells and reserve pressure gates for keeping a child out of a room.

The opposite of a pressure - mounted baby gate is a hardware - mounted gate which attaches permanently to the surface and is a better alternative for stairway applications.

Hardware - mounted gates attach to surrounding walls or doorframes with screws.

Using a new «integrated tuning system,» this hardware - mounted gate adjusts to fit irregular walls and a variety of openings from 26 1/2 to 40 inches wide.

If you are installing a gate at the top of a stairway, you shouldn't use a pressure mounted gate since the risk of it being pushed out of place and having your child fall down the stairs is too great.

Its height is more or less than 30», so you can use 2 - 3» to mount the gate off your floor.

As easy as it may seem to throw up a safety gate, you are advised strongly, to never install a pressure mounted gate at stairways.

Even if it is lightweight and easy to put up, we can't forget the fact that it is hardware mount gate so it has to be mounted to wall and isn't applicable to underside of a bannister or cabinet.

This is a good alternative for pressure mounted gate for stairs and needs to be bolted.

Buy «White Safety Gates» products like KidCo ® Safeway ® Gate in White, Cardinal Gates Outdoor Safety Gate in White, Dreambaby ® Liberty Auto - Close Gate in White, Dreambaby ® Spacers for Retractable Gate in White, KidCo ® Angle Mount Safeway ® Gate in White, KidCo ® Gateway Pressure Mount Gate in White

Mounted gates which are typically used for stairways, main hallways and high traffic locations.

Tension mounted gates are fine in between rooms, but at the top of the stairs you need a gate with screw - in mounts.

Electrical covers, cord wranglers for draperies and blinds, hardware mounted safety gates for stairs and pressure mounted gates for other areas, cabinet locks for the kitchen, bathroom and drawer locks for all the dressers in your home.

Pressure - mounted gates are best used in places like the bottom of a staircase or between rooms to keep your baby from roaming.

Again, don't use a wood or plastic pressure - mounted gate at the top of stairs, but if you need a gate to keep your baby out of a certain room or area, you'll be just fine with one.

The obvious downside to hardware - mounted gates is that they're a more permanent solution: when you remove them, they've permanently marked up your wall or door.

If you have no staircase doors, install hardware - mounted safety gates at the top and bottom of the stairs; spring - mounted gates are not advised.

Pressure mounted gates can be a great solution, because they're usually inexpensive and versatile: you can use them in practically any space that's small enough for the gate to fit.

Unlike pressure - mounted gates, hardware - mounted gates are a more secure, permanent solution that mounts securely to the walls of your home with screws or brackets.

Hardware - mounted gates are generally safer and more parent - friendly than pressure - mounted gates, which often cause more wall damage.

Most hardware - mounted gates on the market are easy to open, but there are some pressure - mounted gates that are more complicated (usually the basic models).

There are two basic types of baby gates for stairs: hardware - mounted gates and pressure - mounted gates.

Install hardware - mounted safety gates at the top and bottom of every stairway (pressure - mounted gates aren't as secure).

Contrary to what most people may think, if installed properly, this child safety gate, will not only be easier to use, but will also cause less damage to your walls than pressure mounted gates would.