At this point, you ca
n't remove the back cover, because the fingerprint cable and the USB Type - C port cable are still connected to the main board.
The device has a SIM card slot under the back cover,
first remove the back cover, then you have to remove the battery too, in order to insert the SIM card.
First you need turn OFF the device
then remove the back cover to expose the slots, now remove the battery in order to insert the SIM cards.
When removing the back cover, you can reach the 2200 mAh battery, and get access to the microSD slot supporting up to 32 GB, so you can expand the 8 GB internal memory.
Removing the back cover gets you access to the microSD card slot, which allows for expansion of the 16 GB or 32 GB of on - board storage, which also determines how much RAM you get.
For example, unlike the iPad, which said to be quite difficult to take apart, only a simple plastic opening tool was needed to
remove the back cover of the Kindle Fire HD.
You can keep your phone protected by keeping it inside a cover or case;
just remove the back cover and attach the energy card on the battery, and then wrap your phone in the cover.
The power button is placed at the top of the right edge, and above it, you will find the notch to
remove the back cover.
If you ever have an overheat issue like our friend aberts10, the solution is
removing the back cover and cleaning the heatsink and other parts of dust.
In fact, we haven't forgotten about you, so we've got this handy - dandy tutorial in case you want to learn how to
remove its back cover.
You do have to
remove the back cover to access the microSD card slot on the right side.
Also, after
we removed the back cover and put it back on, it seemed less creaky.
To insert a SIM card on your Galaxy On7, switch off your device and
remove the back cover.
In this guide, I will
remove the back cover, battery, SSD, RAM, Wi - Fi card, hard drive, cooling fan, heat sink and motherboard.
To insert an SIM on these devices, you need to
remove the back cover and just above the battery you can see the SIM slot.
In order to
remove the back cover, you need to remove the SIM card tray and disconnect the fingerprint & power button cable from the motherboard.
The back cover of LG L90 is removable, and only after
removing the back cover, one can insert the two SIM cards and MicroSD card.
Battery You can
remove the back cover but the battery is non-removable.
How to
remove the back cover, battery, camera, speaker and motherboard.
Once
you remove the back cover, there are two speakers on the sides, so the large grill doesn't make sense but that does give a good aesthetic appeal.
Like it or not, each device ships in this flavor, but easily customizable with the new StyleSwap covers available, and OnePlus has made it easier than ever to
remove the back cover.
First you have to
remove the back cover and take out the battery of the device.
Once
you remove the back cover of the Lumia 630, you would see the three slots after pulling the battery out.
Read below on how to
remove the back cover.
Unfortunately not only do you need to
remove the back cover to swap out a microSD card, but also the battery.
The 2 supports dual SIMs, and has a slot that you can access by
removing the back cover.
Not only does it include perks for power users, LG's changed the way we access the battery with a cartridge - like input so you don't have to
remove the back cover.
No, the Aluminium Unibody design on the device does not let
you remove its back cover, and the battery is protected beneath the Aluminium body.
In order to reveal the microSD and SIM card slots, you will need to
remove the back cover.
better not to
remove the back cover, as the SIM slot is on the side.
The Unibody design doesn't allow you to
remove back cover and battery.
The SIM slots, microSD slot and the battery are accessible after
removing the back cover.
The SD memory slot is placed under the back hood, so you will have to
remove the back cover, but not the battery.