When you were putting on your first
top coat of polyurethane did you use a brush and then a roller for the next three coats?
Not exact matches
I would probably use a couple
coats of polyurethane / polycrylic on a table
top, but I've used wax on my chalk painted kitchen cabinets and they have held up great.
The
top was finished off with a couple
coats of polyurethane for protection.
STEP 3 After the acrylic has fully dried, I'd let it dry at least overnight,
top it with 2
coats of Polyurethane.
Many people after having lacquered kitchen cabinets for a little while applying several
coats of polyurethane on
top to protect the lacquer.
I am a bit confused, though... (I sprayed the
top cabinet first with 3
coats of chalk paint and 2
coats of my favorite Varathane Matte Finish
Polyurethane.
For the
top coat of the table, I used Minwax
polyurethane in a satin finish.
-- I sprayed the
top cabinet first with 3
coats of chalk paint and 2
coats of my favorite Varathane Matte Finish
Polyurethane.
I would probably use a couple
coats of polyurethane / polycrylic on a table
top, but I've used wax on my chalk painted kitchen cabinets and they have held up great.
Finally, I finished the
top off with 3
coats of this
polyurethane to protect my hard work — for this step I used a water based product to prevent yellowing and for an easy clean up.
Step 4) Spray 2
coats of Minwax 33050 Fast - Drying
Polyurethane Aerosol, Gloss Finish on the
top of the table
top.
I wish I would have used a wax
top coat instead
of polyurethane for our kitchen cabinets.