Sentences with phrase «tube wall»

The RLX Sport Hybrid also uses a 32 mm diameter tubular front stabilizer bar, but with a thinner 3.5 mm tubing wall thickness that results in reduced stabilizer bar stiffness.

«The initial specimens included skeletons embedded in crystals on the lava tube wall and thus were likely very old,» Howarth said.

All RLX models use a 24.6 mm diameter rear stabilizer bar with 3.6 mm tubing wall thickness, hardened with a special shot - peening process.

Our «Smart pig» technology, which determines tube wall thickness and identifies potential issues with the coils after a pigging decoke

Although copper corroded slowly — it would take about 15 years for 1.2 - millimeter - thick copper tube walls to develop holes — localized corrosion was observed on cold - worked copper, the material used in sump pump tubing, NIST co-author Elisabeth Mansfield notes.

Carbon tube walls are good conductors, and along the gap between the ends of the nanotubes the current flows thanks to the tunnel effect, which is a quantum phenomenon where electrons pass through a barrier that is considered insurmountable in classical mechanics.

Without the PPPL - designed device, the intense NDCX - II beam would rapidly expand into the beam tube walls before reaching the target.

The Mobile chandelier and Tube wall light are by Michael Anastassiades.

[26] The lava tube is remarkable for its length and for the number of well - preserved lava cave features, such as lava stalactites and curbs, the latter marking high stands of the flowing lava frozen on the lava tube walls.

When activated, the Viper operator remotely fires a high - powered stream of water through a flex hose to clean the entire length of each tube in the exchanger, removing deposits and other buildup from the tube walls.

By securing a pellet (with neodymium magnets) on the sides of the tube walls rather than at the bottom, it allows complete removal of the supernatant without touching the pellet.

The process does not appear to damage the tube walls, probably because their hexagonal structure is more stable than the pentagonal tips.

Two front stabilizer bar specifications are used: the front - wheel drive RLX has a 32 mm diameter tubular steel front stabilizer bar with a tubing wall thickness of 3.9 mm.

Another reason that the performance is closer than one might expect looking at the difference in tube wall conductivity is that the all configurations are limited by the thermal conductivity of the boundary layer of water just inside the tube wall — it does not matter how conductive you make the tube wall, you are still limited by this boundary layer conductivity.