Sentences with phrase «turbine shaft»
On vehicles equipped with an automatic transaxle, connect turbine shaft speed sensor connector.
fordcontour.org
Attributed to what GM described as a mistake by a supplier, the transmission turbine shaft can fracture in cars with the six - speed automatic transmission and the 1.8 - liter four - cylinder engine.
The three rotating clutches have been located forward of the gearsets to minimize the length of oil feeds which provides for enhanced shift response and simplicity of turbine shaft manufacturing.
On vehicles equipped with an automatic transaxle, disconnect turbine shaft speed sensor connector.
Features include a five - pinion gearsets, heat - treated stator shaft splines, induction - hardened turbine shaft, and seven - plate 3.4 clutch
The turbine blades are assumed to be made of carbon fiber and the turbine shaft and blade supports are made of Aluminum 2024.
On vehicles equipped with a automatic transaxle, attach the turbine shaft speed sensor wiring into clips on the transaxle.
On vehicles equipped with a automatic transaxle, detach the turbine shaft speed sensor wiring from the routing clips on the transaxle.
This, along with thicker thrust washers, and an improved heat treatment on the turbine shaft help handle the higher engine torque.
It also includes a unique high - strength input housing, higher capacity servo, heat - treated stator shaft splines, induction - hardened turbine shaft, eight - friction - plate 3 - 4 clutch, larger 2 - 4 band and specific valve - body calibration.
The turbine shaft itself is very short, keeping oil channel drill lengths to a minimum.
This architecture also features a turbine shaft node that reaches to the outside of the barrel, enabling easy execution of a high - resolution magnetic speed sensor.
There are two benefits of this new design feature: The reduction of one oil channel between the valve body and the rotating clutches, which reduces the number of rotating oil seals and oil channels within the turbine shaft; and, secondly, the capability for rapid discharge of oil in the compensators during clutch apply, for greater control.
The 4L70 - E four - speed automatic transmission features five - pinion gearsets, heat - treated stator shaft splines, induction - hardened turbine shaft, seven - plate clutch and specific valve - body calibration.
The steam pushes these blades causing the turbine shaft to rotate at high speed.
A generator is mounted at one end of the turbine shaft and consists of carefully wound wire coils.