Sentences with phrase «use baseboard»

Even in a home with standard 8» ceilings, you should still use a baseboard at least 7» in height.

I'm planning on putting shiplap in several rooms so your review of the different materials you have used was very helpful, especially using the baseboard molding.

For our planks we used baseboard trim molding from Home Depot and it worked great!

If you're wanting to stay chic, you can use baseboards or wooden crown moulding that you can specially make to have space inside to hide cords on wall - hanging TV's or other machines.

Last year I ended up having to replace and upgrade the heating / cooling unit for the house, which eliminated the need for using the baseboard heaters and my curtain dilemma.

Not exact matches

I use it on everything now... the coffee table, the entertainment center, side tables, bureaus in the bedroom, book cases, and even baseboards.

Good thing about this gate is that it is easy to install because you can use it with or without baseboards and is practical for the top of the stairs as that part of the house requires a tough protection.

Use electrical tape to secure electrical cords along baseboards.

In addition, the baseboard structure ensures that parents can grab the entire bag with just one hand using the installed handles.

There are bristles on the edge of the cleaning head, making it perfect for use in tight corners or for baseboard cleaning.

Have you ever used this method on baseboards or door trim?

Use a squeeze ketchup bottle top as a vacuum attachment to suck up cat litter or other bits that fall into crevices of your floor or baseboards (lilluna.com).

You can also use diatomaceous earth around the baseboards of your house as a flea repellent.

Some rabbit owners make custom baseboard protectors by using pieces of wood with hinges that stand up to block the boards, wire and plastic storage cube pieces that snap together and lean up against the wall, short pieces of wooden fence pickets individually attached with removable adhesive pieces (i.e. Command ™ strips) so they can be replaced as needed, and other creative protective options.

Make sure that you tie up all loose wire and cables, or use cable tacks and attach them firmly to walls or along the baseboard, counter top, up desk legs, etc. so that there's nothing to attract your cat's attention.

«Our powder can be used on the pet as well as in our personal environment, because fleas only spend about 20 percent of their time on pets — the rest of the time they are hiding in places such as carpets, furniture and baseboards,» she said.

If extension cords are used, tack them against a baseboard or run them under a carpet so they can not be played with or chewed.

Refreshing gallery spaces to evoke Freer and Platt's aesthetic vision, removing carpeting and restoring original terrazzo floors, installing marble baseboards, refinishing architectural details and preserving the use of natural light while incorporating state - of - the - art standards for the display and preservation of the collection.

- be them applied in the gallery space, in a branded baseboard suggesting a domesticity, or repeatedly stamped on the walls, using a bureaucratic tool — the stamp — creating a mural, or silkscreens applied vertically to the wall, contradicting the natural flow of the ink.

Hydronic or Baseboard Heat - this heat produces a warm heat because it uses convection and doesn't dry the air out as much.

For heating, he uses one electric baseboard, two 100 - watt lightbulbs and six candles.

• Demonstrated ability to follow floor plans and directions to install hardwood, vinyl and laminate floors • Demonstrated expertise in planning floor installation process in accordance to set deadlines and budget constraints • Hands - on experience in installing LVT, VCT, carpet and ceramic floors as directed by customers • Complete insight into mixing and applying required compounds to join and adhere foundation materials • Proficient in sweeping, scraping and cleaning base surfaces to correct imperfections in a bid to prepare worksites for flooring work • Adept at cutting coverings and foundation materials according to specifications laid out in blueprints and sketches • Competent at using a variety of hand and power tools by following strict safety measures • Hands - on experience in cutting, trimming and shaping materials so that they align with walls • Demonstrated ability to measure, cut and install skirting along walls or baseboards • Documented success in creating and maintaining effective working relationships with vendors and suppliers in a bid to acquire materials on time • Proven record of efficiently handle repair, remodeling and renovation work on floors, using exceptional insight of repair and maintenance work • Qualified to provide a neat finishing touch to installed floors by performing buffing and polishing duties

Nails or staples used to attach electrical cords to the walls or baseboards can damage the cords and cause fire or shock hazards.

Kitec piping was made and used extensively between 1995 and 2007 for potable water, in - floor, and hot - water baseboard heating systems.

The house I have is old, and has old windows, so I used the regular baseboard heaters to put under the windows.

A baseboard heater typically uses the convection process to suck in the cold air near the floor, heat up the air, and release the warm air so it can rise up and keep the room warm.

When cutting the 1 × 6, we used a jigsaw to notch out a space for our existing baseboard.

I cut my existing baseboard out, knowing I would be using it for the front of the bookcases.

Once I had my spacing worked out, I moved the bookcases aside and used the measurements to cut out my baseboard.

We not only create stunning interior design and décor but help you avoid wasting valuable dollars on things like using 7 - inch baseboards when a 5 - inch height will save you $ 10K.

We ended up with some pretty big gaps at the bottom to accommodate for the doors, so we used wood shims between the base of the bookcase and the baseboard.

Also SW Pure white did you use for all of your trim and baseboards?

I am in the process of replacing our baseboards and I was wondering what you have used in your living room?

Question for you about the dusters — I use the Bona duster, too but find I have to gather crumbs, hair, dust, etc into a pile and still vacuum it up (same with corners and baseboards) so are we really saving any time or effort?

If you want to add just a touch of tribal design use tape to tape off a stripe of a desired size to paint a stenciled accent along the ceiling or baseboard edge.

We got to work, tearing out carpet, painting walls, putting in wood flooring, baseboard, etc... One of the items we came across was a super old, worn out, 18 × 24 ″ blackboard that was so worn out and used, I could hardly get the chalk to make a mark without going over and over it.

Off the top of my head, I could use it for new baseboards once we finish the hardwood flooring.

I had small pieces of painters tape around the stencil, taped it in place then used the roller to smush it against the baseboard.

We need a new baseboard heater in our living room and I would use it for that.

And, is there any reason I couldn't just use the bottom board as my baseboard or will I have to reinstall my baseboards?

I knew that I wanted to use an accent color on the molding and baseboards.

If a simple dusting doesn't suffice to remove gathered dust on your baseboards, use a toothbrush to gently scrub them clean.

You have to add water to your paint (I used Sherman Williams that was mixed especially to match my baseboards) according to the directions.

No, the barn door hardware I used allows enough room away from the wall to leave the existing baseboards in place.

It will leave larger nail holes than the 18 gauge so we use it to attach boards when building furniture and to install crown molding, casing and baseboards.

I wanted to make sure my first board was straight so I butted the board right up against my baseboard and then used a level to adjusted it to straight.

Once all the planks are up, we'll re-attach the crown molding and baseboard cap molding, and then use some kind of trim down the sides of the walls to finish everything off, nice and neat.

Small trim on top, baseboards on the bottom, and used inexpensive lattice boards for the strips.

Vowing not to miss out again, I began fixing up my old white farmhouse — using YOUR house as inspiration on those days I just couldn't stare at another paint sample or sand another baseboard.

What did you use for your crown molding and baseboards?